Why not a game show upward into the Games folder more?

Similar Questions

• two computers on a network (wireless) but three show upward in the network folder

  I have a Dell Inspiron under Vista x 64 (server) and a Dell Vostro, computer laptop, running on Vista x 86 (client) and a printer (USB Server) network associated with a Cisco WRT400N... everything works fine. However, in the network folder, on computer, I get an icon for a third computer. When it is explored it looks exactly like my server... but it has its own unique name... and I have only the above two networked computers. I worked with a Cisco service representative yesterday to ensure that all goes well with my router. I don't know I've caused this... now... can someone tell me how to UN-cause it?

  Hi runslong,

  It is possible that computers on the same network can be duplicate themselves.

  I suggest that you disable the discovery of the network on the computer and later get back, check if it works.

  To turn off network discovery
  a. open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  b. click turn off network discovery, and then click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Enable or disable network discovery
  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-network-discovery

  If the previous step fails, then I suggest that you unplug all the devices connected to the network and then reconfigure the new network, check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why not Time Capsule shows under "other devices" in the Finder?

  Why not Time Capsule shows under "other devices" in the Finder on my MAC?

  "Devices" are connected directly to a Mac and would include things like USB hard drive, FireWire drive and Thunderbolt drive, etc.

  The Capsule is a "network" connected to a network drive... If the operating system on your Mac behave, Time Capsule will appear in the Shared section.

  If you have added a NAS (Network Attached Storage) disk, this product would also appear in the Shared section.

  A wireless printer can also appear under shared.

• Why when I select a song to play iTunes Music folder only it disappears into the music folder?

  Why when I select a song to play from my iTunes Music folder only it disappears into the music folder?

  It does not play... but I have to remember to save it to my folder of music or its loss.

  Can you give us more details...?  What is the folder "iTunes Music"?  Are you you talk in your library iTunes music?

  I have to remember to save it to my folder of music or its loss.

  What do you do to "save her back? '

• "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

  "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

  Hi Jack,

  This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Why not run prinnter canon LBP2900 ON the win.7

  Why not run prinnter canon LBP2900 ON the win.7

  That's like asking ' why not my departure from the car?

  You have not provided enough information.

  HOW TO ASK A QUESTION:
  http://support.Microsoft.com/kb/555375

• When I click "not spam" on a message in the "junk" folder, the content of the message is changed

  the message seems to be moved, but the content is changed

  Re: when I click "not spam" on a message in the folder "undesirable."
  by "did not" I assume you mean 'delete '.
  by the "junk" folder, I assume you mean that the folder "Deleted" or "trash".

  I guess you mean:
  When I click "not spam" on a message; in the "junk" folder, the content of the message is changed.
  Until the message "Deleted" shows in the "Deleted" folder, but seems to have changed the content.

  Try to make the folder "Deleted".
  Right-click on the "Deleted/trash" folder and select "Properties".
  Click the 'repair file '.
  Click on 'OK '.

  How many times you empty the trash?

• Add a tag to when they fell into the Applications folder

  Hello

  I want to add tags to my applications for categorization when I drop them into the Applications folder. In my way of novice, I created a folder Automator action where I add Spotlight comments to the app, but that's not what I want to do, I want to label it. The only other option is aimed at Finder label but that gives you just seven color options. I want to have a promt asking me what tag I want to attribute to the request, exactly as it does for the Spotlight comment action. Is this possible with Automator or should I look elsewhere, like AppleScript?

  I have two solutions to bypass, where the first is a combination of Automator and Hazel (probably consume more memory) where I use the Spotlight comment action in Automator and then let Hazel tag of the file via a dynamic tag (comment Spotlight under 'other' element of choice). But it is almost useless, because if I just replace an existing file, the workflow is not triggered, in this case only if a new file is added. How can I make the workflow work on new and existing files? The same thing happens when I use the alternative workaround, I integrate Quicksilver in an Automator workflow to send the item (file) to Quicksilver if I where he can score. Any suggestion is welcome!

  Thanks in advance!

  With or without Automator, AppleScript script would be the way to go.  You'll have the same problem with actions folder be it, however, they are only triggered when a component is added to a watched folder.

  You can use the URL of cocoa class to add your tags - this topic of the mailing list has the script library routines (note that you can use directly in a script of El Capitan).

• Firefox shows upwards on the taskbar but will not maximize when clicking on window

  I tried re installation, but when I click the icon it will appear on the taskbar but will not maximize.

  It is a more detailed explanation of the above.

  Sometimes, a window is "off the screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

  A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

  #1 method: If you can get a zoomed window:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  #2 method: If you can not get a Firefox window for all:

  Close Firefox by right clicking the icon in the taskbar > close all windows.

  Using the Run dialog box (windows key + R) or the search for the start bar menu (or Windows 8.1 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

  Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• I can copy a URL, but may not be able to paste into the body of an e-mail message. Also the hypelink doen't it. I don't have this problem with Internet Explorer...

  When I copy a URL and go to paste it into an email, it will not stick. Another box opens. I can paste the URL in the subject line, but doesn't hyperlink it. (blue) When you use Internet Explorer, I don't have this problem. I'm new to FF with a new computer.

  Paste a link in the subject line does not a link so that the part is normal. But being not not able to paste into the body of the e-mail is not. I can't think of a reason that would happen. What email program are you using?

• Laptop does not charger and cannot get into the Bios, help!

  Hi, I own an Acer Aspire 6935 G, so far he treated me so. Recently, the charger port broken (one of the wires came loose). I have brought a replacement and mounted in it, but on my charger fuse blew!

  Then I took another replacement just to the case where there has been previous replacement I bought and nothing major, new replacement seems to work well (lighs load lights up) but it does not all power in the laptop. Witnesses of load lights as indicated, but the laptop won't before the Acer splash screen. Due to the battery being dead, I can't access bios set up so I can check the status of my laptop not enter recovery. I was wondering if it could be something other than a hardware problem, and if this is the case; It is expensive to do is fixed or am I better off buying a new laptop?

  Thanks in advance!

  This is a:

  Acer Aspire

  6935G

  Intel Core DuoT6400

  4 GB OF RAM

  Windows 7 Ultimate

  Edit: There is think beep when the chargers plugged into the lapto, if that makes a difference?

  Lugman > recently, the charger port broken (one of the wires came loose). I have brought a replacement and mounted in it, but blew the fuse on my charger! >>>

  Sorry, but it does look like a hardware problem. Sounds like the power supply may be about to blow another fuse. I think you have a short or large scale electric leakage somewhere that prevents charging of the battery and power - it but maybe not enough (yet) to blow another fuse or switch off the LEDs.

  First remove the battery and power connections before you tear things. The first place I would look is around the port of loading where your problems started and hope that it's not deeper in the system where it can cause some MB or more serious damage. Look for the places where the lines of welding on the System Board may be in contact with a screw or a metal on the ground. While you're there, reconnect both ends of all accessible Ribbon (like the video and keyboard) connectors. Also to the HARD drive, modules of memory vivid and all the other connectors for component for good measure.

  Once you have checked everything, and before you have wound all caches and screws, see if you can carefully insert the battery into the receptacle and plug the charger. Don't try to power. You can do this on an insulating surface to avoid the land of naked drivers. The LED light looks like he is in charge? If so, let it continue to charge without trying to power on. I think after 4-5 hours, the led that would indicate a fully charged battery. If so, I would try and then power on. If not, and it's still seems to be in charge, stop, do not try to and we will draw the next steps.

  Jack E/NJ

• empty folder named "enteral" will not go into the existing folder on desk too long because "Path of Destination."

  Make an empty folder to simplify the example of this problem recently of news. Everything I do, even a single word names, will not go into any other file with this next window: "Destination path too"

  long. "

  The file names (s) would be

  be too long for the

  destination folder. You

  can shorten the file name
  and try again, or try a

  location with a

  shortest path.

  Hello

  Welcome to the Microsoft Community Forums.

  Looks like you get an error message "the file (s) would be too long for the destination folder. You can shorten the file name and try again, or try a location with a shorter path.

  This normally occurs when the file system is corrupt.

  I suggest you scan the computer for the error. Follow this step to do the same thing:

  1. click on start
  2. type: CMD, according to the results, right-click CMD-> click 'run as administrator '.
  3. at the command prompt, type: chkdsk /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  In addition, you can consult the following link for more information:

  Check a drive for errors

  Hope this information helps. Get back to us with more information so that we can help you.

• Not my events show up on the calendar

  I do not use any other calendar except the one on my pc windows 8 and yet show events that are not mine.  Under accounts is made see the my account aol, but I do not use this calendar.  How know what is sync for that adds events and how that stop him?

  Hello Kathy,

  You can check the link below for unsynchronized account calendar app.

  1. sign in to the Windows Live profile page: http://profile.live.com/services

  2. click on AOL, click delete this topic completely.

  3. click on the button delete in the confirmation window.

  Note : But if you still want to have your accounts connected, please note that all events that are from this account will be in the calendar app

  I hope this helps. Otherwise, feel free to write us back.

  Thank you

• MiFi will not work unless that plugged into the computer... Verizon no help at all it explains a vista problem... He used to work, but I think that an update did something to it and now it does not work...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: hours on the phone with verizon... nothing is ready to throw the Verizon mifi and go to TMobile... forums looking for answers but not help there... seems a lot of people have this problem... someone at - it help him?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  A Beyschau of Annette

  Hello

  Quote: ' MiFi will not work unless plugged in to the computer.

  Where it has been plugged in before?

  If you are using to connect via Wireless, then it might be that your wireless connection has a problem.

  ----------------------------

  Wi - Fi in general.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Photosmart D7560 do not print envelopes-> load paper into the main tray

  My photosmart D7560 h will not print envelopes, after having moved the envelope position for printing, the message "loading the paper in the main tray is displayed.  It prints correctly the data of envelope on a sheet of paper 8.5 x 11.  The Setup is for a #10 envelope.  Envelopes are self-sealing.  I tried to crease the edge better but that did not help.  I tried a non-self seal (who had a top letterhead so I couldn't use it for this shipment) and he worked.  Is it possible to do self seal envelopes work in this printer?

  You have the flap folded inside the envelope, so that it does not stick?