Why not Apple TV remote control IR signal power?

ALMOST everything MY Gen 4 Apple TV can do. He turns on the TV and can control the volume of my audio receiver via IR

Then why the hell can we use the same IR function to activate the receiver as on and off so?

Looks like a fairly simple function that would be pretty easy to impliment through IR control sampling as is the volume control. And then just implement that Protocol in the sleep unit as is the HDMI control.

Oh & the Remote App should really be able to send a command to sleep for Apple TV

The pieces are there, but not quite put together :-/

This is a user forum, you're not address Apple here.

Provide feedback

http://www.Apple.com/feedback/

Tags: Apple TV

Similar Questions

  • Satellite A100 (PSAARA) - I can not use the remote control

    I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

    Thank you!

    If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
    If this does not help please let us know.

  • Two Apple TV - remote controls works with both at the same time

    Just bought the Apple TV 4, this means that I moved my old version 3 Apple TV in the room, when I use a distance the two Apple TV now respond. How can I connect the remote control for the Apple TV right, to keep them from harm?

    Try this:

    Désapparier money ATV3 the remote control by pressing menu and left for 6 seconds.

    Block the front ATV3 and remote peer with the ATV4 the silver medal by pressing menu and right for 5 seconds.

    Block the front ATV and press menu and the central selection button for 5 seconds

    Unlock the ATV4 and check that it does not meet the silver remote.

    Block the ATV4 and unblock the pair by pressing menu and right for 5 seconds and ATV3.

    Check the ATV3 now responds.

    Remove the block of the ATV4.

    A beer...

  • Apple TV remote control glass broke when dropped

    Recently, my husband bought our second Apple TV, an upgrade of the first edition, we have purchased four years ago. We are customers of long-time Apple and have always possessed several Apple products. We both like the updates to the new Apple TV with the exception of the remote control. There are a few things we don't like about the design. First, our remote fell of the couch on a ceramic tile floor and broken glass. Accidents happen, and I dare say that it is going to be a lot of unhappy customers when they abandon their distance and it crashes. I will say that if the remote was dropped on the carpet he probably have come out unscathed. The remote control fell to the back of the sofa at a height of about three feet. I think that the remote control must be able to survive a fall like that or maybe Apple could consider designing a case or neoprene as the channel to the remote control. The other complaints we have are things that we have learned to adapt to. Remote ginning glass is well issue and because Apple products are on the pricey side (I had to replace a laptop charge cord twice - $80 a pop - compliments of our puppy) we have not yet checked the cost of replacement.

    Yes. It is a delicate user in my opinion not the real world tested. There are other posts on the topic, and I saw the new cases that occurred just as we have for our other handheld devices.  I think Siri remotes are also about $80...

    I will also mention that the old Apple TV remotes work with the new ATV as well - except Siri.  In fact, I use remote money or my universal remote control harmony more than the included remote control of Siri (I can't find Siri on tvOS it useful - still).

  • Break glass a very easy Apple TV remote control

    We bought a new apple tv 4. Now after 2 days because the remote is so happy, he eludes easy hands.

    No problem with any remote without glas.

    Apple use a glass so thin and weak that it will break after a decline of only 1 meter high on the floor. This glass is so strong, that our employee cut his hand.

    We ask this through the present apple to change the design of this remote, so it is safe to use.

    When we look at the remote control, it can be folded very easy.

    It is a factory engineer bloop.

    It is not necessary to go into an endless debate.
    Yes, this remote is very slippery

    Yes, this glass cut in a hand of people picking up the Earth.

    No we couldn't use the loop because different people would use this RC.

    No, it a cover arranty so that it is not available.

    No, we didn't have 2 left hands.

    This info is to protect other people and hope that apple will change this issue of quality.

    (the red stripe is to protect the glass and the people)

    No, it a cover arranty so that it is not available.

    Yes it is.

  • Why not apple reimburses my application to buy

    Why the apple support won't reimburse my application to buy

    Hello

    I'm afraid it is not here to discuss or speculate on Apple decisions.

  • Toshiba 40L5450EA freezes and does not respond to remote control

    First of all, I want to tell you that I have a very good experience with the Toshiba products.

    But unfortunately I just bought the new toshiba android TV Toshiba Egypt 40L5450EA (El Araby Group) last week and I am facing a very stupid problem that when I turn on my TV, it works but freezes and there is no response from the remote control and Panel and I can not turn off again.

    Instead, I have to unplug the power supply cord and return again and so that it works correctly.

    Is this normal and acceptable?
    Thanks in advance, but I need a urgent clarification

    As already mentioned in the monograph: this model is designed for the Middle East market as it works with Android (there is no EU with this platform models).
    For more assistance, contact your reseller or Toshiba.

  • I bought an iPad mini4 specifically for use with a pro Phanton3 drone. It will NOT connect the remote control with the drone. They say it's a problem of software iPad mini 4 9.3.3. How can I remove and reload it.

    How can I uninstall 9.3.3 an mini iPad iOS 4 and reinstall? I bought it specifically for a ghost Pro 3 drone, and it does not work with the drone. Someone had luck with uninstalling/reinstalling. At this point, I lost a LOT of money.

    Apple frowns on a decline in the ratings.

    While Apple allows, try downgrading to 9.3.2.

    For a limited time Apple will return you to the previous version.  Do not hurry.  This period takes up to a week.

    See brownox second post here:
    https://discussions.Apple.com/thread/6545455
    and
    http://www.GottaBeMobile.com/2014/09/17/downgrade-iOS-8-to-iOS-7/

    see which versions are allowed:
    http://API.ineal.me/TSS/status

    --------------------------------------------------------------

    See the arizonacat post and others on this topic.

    https://discussions.Apple.com/thread/5337442?TSTART=0

    arizonacat notes these sites:

    --------------------------------------------------------------

    See the second procedure in reloading the software from scratch.

    Re-boot ipad.

    Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

    https://support.Apple.com/en-us/HT201559

    Force power down if above give it trouble you.

    At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

    more information on the re-start:

    http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

    This these tips from MichelPM to improve performance:

    https://discussions.Apple.com/message/29504169#29504169

    https://discussions.Apple.com/message/29504311#29504311

    Restore factory settings by loading the latest version of the ios that will support your machine:

    (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

    https://support.Apple.com/en-us/HT203977

    (2) three methods of restoration of your ipad.  [simple as abc]

    2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

    http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

    2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

    http://support.Apple.com/en-us/HT201263

    3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

    http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

  • Why not Apple Watch

    I think it will be a good idea if the spple look use the Sun as energy source to load instead of having to plug it into an outlet

    Hello

    If you want to suggest this idea to Apple, you can do so via the form on the next page:

    https://www.Apple.com/feedback/watch.html

    It is a community of support based on the user (if you don't talk to Apple here).

  • Apple TV not showing in remote applications on iOS 10.0.2

    Since the installation of iOS 10.0.2, none of my two Apple TV are appearing in the Remote app on my iPhone 6s or my iPad Air. Troubleshooting, I also downloaded the Apple TV Remote app, but they are not listed when I hit «Add Apple TV»

    I checked they are all on the same network and connected with my Apple ID I also tried to disable the home sharing on the Remote App and turing back on. None of this solves the problem.

    I can see the two Apple TV listed in AirPlay on my iPhone... so I'm puzzled as to why they are not displayed in one of the remote controls.

    My Apple TV is model A1469 with software 7.2.1 version (8011).

    Any suggestions?

    Here are the instructions to set up the Apple TV Remote app.  Did you follow all that?

    Set up the Apple TV remote control - Support Apple app

  • Unplug the apple TV apple tv 3 remote control 4

    Hello

    I hope that someone in the community can help me.

    I have 2 apple TVs in the House-3rd and 4th gen gen.

    They are in the same room. If I use the remote 4th gen, all right, the remote control is not to influence the old apple tv.

    But the reverse does not work. If I use the remote to control the Apple tv 3 3rd generation it also wakes ups the new apple tv too.

    How can I separate the systems? The remote gen 4 is very good but I need to disconnect the 3rd generation away from the apple tv 4

    Would this be possible? I tried the menu + left option of the remote control, but he did not like the apple TV4 does not react to this topic.

    Thank you very much.

    Kind regards

    Markus

    Follow this exactly, and your problem will be solved:

    Two Apple TV - remote controls works with both at the same time

  • 1700 MXP not respond remote control

    Hello

    One of my clients has problems with their codec MXP 1700.

    It no longer meets the remote control. They tried another remote of an edge 95 MXP that does not work either.

    The two remotes work with the decision of edge 95 MXP on batteries or a remote control problem.

    The remotes are the two TRC 4.

    I checked the deployment guides and admin and it says that the only way you can tell a MXP stops responding to the remote control is to Kiosk mode and select this option. The device is not in Kiosk mode.

    I have RMA had the codec. They have received a new and configured it but they have exactly the same problem.

    Here, any help would be greatly appreciated as I really don't want to have to do another RMA.

    Thank you very much

    Luke

    Check the following to ensure the functioning of the TRC4 remote:

    Control Panel > Menu Settings > KIOSK MODE SETTINGS > ALLOW the USE OF THE remote CONTROL: WE

    Control Panel > Menu Settings > KIOSK MODE SETTINGS > KIOSK MODE: OFF

    Once you have confirmed that ALLOW USE OF REMOTE CONTROL is enabled, you can use the shortcut key to activate the Menu.

    • Press the phone book 5 times and then press 2.  You should now be able to navigate in the menu of the MXP using the remote control.

    You can also increase the remote control IR signal, if necessary.  To access the switching of IR signals, you need to remove the cover of the batteries and batteries (see attached image) on the remote control.

  • Remote control/software Apple TV with the App Store problems

    Seems ridiculous that a Sept 2016 4th Gen apple TV purchase has the same problems of connectivity with the App store. Impossible to connect, or even choose App store, or spare parts offline, erratic, glitch and acts as a problem of distance, but seems to be a software problem or interface. Obvious corrections or ideas to stabilize or least to increase connectivity to app store with 4th Gen Apple TV/remote control?

    No problem of connectivity with a 4th getting Apple TV remote here... Sorry, you encounter this problem with it.

    See if there is something that will help that you haven't tried in this article to support > set up the Apple TV Remote - Apple supported application

  • Remote control does not not on Touchsmart 610-1030uk

    Worked very well for a long time. Now out of warranty. Battery very well. Indicator on the remote and on PC (white LED on the front panel) show IR work. Mouse and keyboard are still working fine. I tried uninstalling and reinstalling the drivers for Microsoft eHome infrared transceiver but still can not respond to remote control of the machine.

    Any thoughts?

    Hello frrw. Sorry to waste your time. I changed the batteries and it works great. It seems that the red LED on the remote control and the white LED on the PC that flashes when I press a button on the remote control do not mean that the batteries are strong enough.

    Meanwhile, I have this recurring problem with blu - ray players. I'll post a new question and maybe you can help.

    Thank you very much.

  • How to check the system configuration of the SX20 if the touch screen and the remote control does not work

    Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

    I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

    Hello

    option is to have access to the local switch and run "show cdp neighbors detail."

    or

    Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

    regds,

    Aman

Maybe you are looking for