Why not change my backgroud Office photos since I have a Trojan horse virus infection?

Similar Questions

• I was not able to do updates. It seems that I have the Trojan horse virus @in32/sirefef.al

  I had minor problems with my computer, but the Microsoft Security icon will blink sometimes indicating that there was a problem.  After finding how to use the program, I discovered that, under the story, I had a virus Trojan:Win32 / sirefef.al and .aq.  I would remove and then a few hours later they would return.  I would like to know what it takes to permanantly remove from my hard drive.  He has now disabled my ability to down load updates for windows, and some of my security system is disabled as well.  If anyone can help I'd appreciate it of course.  Thank you

  Take a look at this site for some information and instructions.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  Hoe this helps.

• Why not convert a Microsoft Office Document to PDF using the context Menu?

  Why not convert a Document Microsoft Office 2013 in PDF format using the options in the context Menu? (Ex: convert to PDF, combine taken files supported in PDF?)

  I've recently upgraded to Acrobat PRO of XI, but now I am unable to combine or convert microsoft word documents to PDF format.

  In Adobe Acrobat X, I had this function below, and he could combine the Microsoft Office Documents in a single PDF. Now I have over this issue in Adobe Acrobat Pro XI. It seems as if it was the program called Adobe Elements having performed the conversion.

  

  You can try to repair the installation of office 2013 by using the microsoft Support article: http://support.microsoft.com/kb/2464297/en-us

  Try to repair the Acrobat pro also, you must use the same options

  Trees try to repair office and Acrobat. Re start the computer and try once more.

• Why not change not the icon doesn't change when I go to yahoo of sites Web-example of the circle of purpe with y on the inside?

  When I shoot to the top of mozilla, I have a grey circle in front of the att home page. When I go to yahoo, this icon does not change in the purple circle. The gray circle left any Web site in the address bar. -maybe only unsecured sites because I see that I have a picture of a padlock when I was directed to this Web site. This happened recently and it happens every time I have shoot to the top of the Explorer.

  The Site identity button has changed to protect users against hackers attempt to "spoof" legitimate research site buttons. The site icon still appears on the bookmarks and tabs, but not at the left end of the location/URL bar.

  • See-> https://support.mozilla.org/kb/Site+Identity+Button
  • See-> http://blog.mozilla.org/ux/2012/06/site-identity-ui-updates/
  • See-> http://www.ghacks.net/2012/05/13/mozilla-improves-firefoxs-certificates-visibility/

  To restore the icons of the site to the location/URL bar, try the add-on again next:

  • Restorer of favicon: https://addons.mozilla.org/firefox/addon/favicon-restorer/ (has previously been reviewed by Firefox, click here to learn more about what it means that)

  There is an add-on to add extra color to the new button

  • https://addons.Mozilla.org/en-us/Firefox/addon/site-identity-button-colors/ (has previously been reviewed by Firefox, click here to learn more about what it means that)

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• I change my motherboard, I do not change anything else in my computer I have xp professional window, when I power my computer, the computer will not start, it asks me to insert the cd and press ENTER, I don't have the xp cd, help me please.

  install a new motherboard in my computer, I need the recovery cd to start the computer, I have Windows xp?

  Assuming that you are XP is already installed (you do not specify) and the old IDE hard drive, you may need to enable the IDE in the BIOS of the motherboard.  Sometimes on systems more recent IDE is disabled for SATA.  Other than that, I don't know.  Find a friend who has an XP Pro CD.  How is that you have it installed but do not have the CD?  If it was a computer OEM like HP, Dell, etc, then you should contact the manufacturer for a restore CD, but since you have changed the motherboard, it is possible that they won't support you more, unless it is a replacement of the factory.

• My elemets 10 does not allow me to upload photos since I bought a new canon, the camera says error message file types were not there is an available update? This would solve the problem?    Thank you

  y at - it a update for the 10 items that would solve this problem?

  you are far track.i never said anything about opening raw files... I can't download photos from my new canon camera telements 10 will not accept the unit cr2 files, but the canon software (will professional digital photo...) I have no problem download from my Nikon DSLR in items 10.

• Why not change?

  I have a table with of line level Before Insert trigger defined on it. It refreshes Col2 to the new value of Col1 if Col3 = 2. I thought it must trigger an error mutation. But it is not... any ideas why?
  
  

  CREATE TABLE zaaf_tbl 
     ( col1 NUMBER, 
       col2 VARCHAR2(30), 
       col3 NUMBER 
     )
  /
  CREATE TRIGGER zaaf_tbl_rl_bi
      BEFORE INSERT ON zaaf_tbl 
      FOR EACH ROW
  DECLARE 
  BEGIN 
    IF :new.col3 = 2 THEN 
      BEGIN 
        UPDATE zaaf_tbl
           SET col2 = 'Col2 Updated'
         WHERE col1 = :new.col1;
      END;
    end IF;
  END;
  /

  Most likely, you are using INSERT INTO VALUES synatx. In this case, Oracle knows with certainty that a row is inserted and so the table is clearly defined - before row trigger is activated only once, so state table is even because it is first of all insert. If Oracle does not know that it will for sure increase, table is the mutation of exception:

  SQL> insert
    2    into zaaf_tbl
    3    values(1,'A',2)
    4  /
  
  1 row created.
  
  SQL> insert
    2    into zaaf_tbl
    3    select 1,'A',2 from dual
    4  /
    into zaaf_tbl
         *
  ERROR at line 2:
  ORA-04091: table SCOTT.ZAAF_TBL is mutating, trigger/function may not see it
  ORA-06512: at "SCOTT.ZAAF_TBL_RL_BI", line 5
  ORA-04088: error during execution of trigger 'SCOTT.ZAAF_TBL_RL_BI'
  
  SQL> 
  

  SY.

• Firefox browser will not move to the office. Other browsers have no problem on the same Web site. ??

  Browser hangs and will not move through or around the office. Using
  rt click disobeys. (sometimes it also locks).
  Other browsers are moving very well with
  Same or similar plugins

  Thank you

  Dale

  I had this problem with Firefox version 15 and found out it was because of the theme I had installed. As soon as I changed back to generic theme of firefox browser was able to move freely again. Some themes work very well but there are some that causes this problem of the browser do not move with left click the top title bar.

• I have the Trojan horse. (Malware)... Speedy P.C. Pro didn't work... All Pro 2013 does not work... and so on and so forth... "WHAT WORKS?" ORK-

  .. so far, I've spent $49.95 and $30,00 and $29.95 Total = $109,90 about malicious programs that didn't come through. I'm not spending a penny more. (Especially on programs that make big promises and do not provide)

  Mozilla Firefox must Any Suggestions?
  "" "" there OWN Malware Removal Tool in maintenance there program?

  Any help would be greatly appreciated.
  None.
  Jeffrey van Vogt.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• I have a Trojan horse in my computer. I have windows xp. I ran avg, but it can't get out the Trojan horse. the computer is very slow and I'm not able to use ctrl + alt + del, or recovery system. If I uninstall windows and install it and then return. who w

  I also get messages saying: my computer is infected by trojan and I should update my spyware... but I think that the message box may come the virus itself...

  Karina...

  It would probably be best for you to use the free services of a reputable online organization that specializes in the removal of malicious virus/trojan/software.  There are now available on the internet.

  Such a forum is hosted by Safer Networking Ltd., authors of the popular software 'Spybot S & D'...

  http://forums.Spybot.info/forumdisplay.php?f=22

  You may want to consider giving them a try, BUT... do not forget to try to comply with their preliminary instructions before asking for help.

  Good luck

• Why can you not change currency on the model of cost in CB 1.5?

  Hello

  I wonder why not change you the currency on the model of existing costs?

  Thank you

  Hello

  Just to add to this answer, the chargeback does not change currency for the following reasons.

  1. as opposition to the payment does not have currency conversions, cost values must be converted correctly, which includes the configuration cost changes history as well.

  2 If a cost template is updated with a new currency, all costs associated with this cost model fixed (with history) are also must be updated.

  Because this operation could potentially lead to inconsistencies, chargeback does not allow it.

  If it is freshly created with incorrect currency cost model and therefore you do not want to change to the good motto, you could create a new model of cost with the appropriate currency.

  However, if you are using the cost model for some time in a single currency and now you want to change to another currency. Could you please let us know here your use cases?

  Kind regards

  Agnes

• Satellite A300-17N - the CPU multiplier does not change under load

  Hello

  I have Toshiba Satellite A300-17N. Yesterday, I noticed that my CPU does not change its multiplier under load.
  I have used programs like premium 95 and Orthos CPU load and programs such as CPU - Z and Everest.

  The multiplier blocked on 6 and do not change its value.
  Under load the multiplier should change its value to 13, but it didn't happen.

  In this case my CPU works on 798 MHz (133 x 6) 1732 MHz (13 x 133) instead.
  I will be grateful for any advice.

  Hey Buddy

  I put t know what you are talking about, and I don t know if you're up-to-date on CPU technology but the laptop was equipped with the Intel Pentium Dual - Core T2370 processor.
  I recommend the Intel page on Intel Dual-Core T2370 properties.

  This processor supports Enhanced Intel SpeedStep technology.
  Do you know what it is?

  Here is a short info from the Intel page:

  + Enhanced Intel SpeedStep technology allows the system to dynamically adjust the frequency of voltage and core processor, which can translate into a reduction in average energy and decreases heat production average. +

  I think it should be clear now.

• My spell checker does not work on my OE longer since I installed Microsoft Works and I don't want to change my e-mail program.

  SPELL CHECK QUESTION

  My spell checker does not work on my OE longer since I installed Microsoft Works and I don't want to change my e-mail program. This spellchecker programs seem to work better with OE.

  Thank you

  Read on...

  OE 6 doesn't come with it's own spellcheck. You need to Word or MS Office program, before 2007. The spell checker in Works 4 to 6 will work with OE, but not other editions. If you do not have such a program, you can download a free spell check to one of these sites.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• I've updated to LR6.4 today and since then have been unable to import photos.  Always comes the following message is displayed:-certain import operations have not been executed.  The following files were not imported because they could not be read.  I don

  I've updated to LR6.4 today and since then have been unable to import photos.  Always comes the following message is displayed:-certain import operations have not been executed.  The following files were not imported because they could not be read.  I don't change anything, update only.  I rebooted since my Mac Lightroom of uninstalled and reinstalled LR6 but all without success.  Very frustrated!

  Hi lindaw,.

  Looks like that the destination location is not set correctly.

  Make sure the destination in the import window location is set correctly and has full read and write permissions.

  Kind regards

  Claes

• Why can I not change my menu still in Photoshop?

  Why can I not change my menu still in Photoshop? When I click on the [edit in Photoshop] button, it happens in Photo Viewer Windows saying cela "Windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates for photo viewer."  I don't even want to open it in Photo Viewer, I tried to Photoshop! Is someone can you please tell me what is the problem?

  You must re-associate with Photoshop psd files. You're on a PC?

  See this:

  "Edit Menu in Photoshop" does not?