Why not my Acer Aspire 5336, burn cd / dvd? I tried the update and uninstall drivers! I have

Similar Questions

• Microsoft Silverlight not updating and uninstalling

  I noticed that Microsoft Silverlight updates have not been installed for some time now and remain in the updates area important. So I tried the update and came with the file don't are not recognized or changed.  I thought then that I remove the program and all over again, but then I had this box (with the big red x in a circle) warning message on my screen

  The Windows Installer

  This patch could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package

  .. Please can you help me remove this program if I can install with new?

  Hey Lord Dracon,

  Try to uninstall Silverlight with Revo: http://www.revouninstaller.com/revo_uninstaller_free_download.html mode advanced that sometimes helps when normal uninstallation methods fail.

  If this does not work or if it does but you have problems to re - install Silverlight (possibly also because of Windows Installer), then check out the Silverlight Forum at the: http://forums.silverlight.net/13.aspx.  You can search for previously responds to questions or post your own new thread (like here).  I draw your attention to this subject more precisely which seems to contain information that should help you: http://forums.silverlight.net/t/234395.aspx/1?Cannot+update+uninstall+install+Silverlight+.

  If the question is about the Windows Installer, it can help in the following article: http://support.microsoft.com/kb/2438651#reso1.

  I hope this helps.

  Good luck!

• Acer Aspire 5336, struck by lightning...

  Hello everyone! I'm new here so sorry if someone asked this question...

  There is one in my laptop (Acer Aspire 5336) were struck by lightning, this sense that I was using an ethernet cable at the time where my house was struck by lightning, electricity traveled down through my router (that knocking out) and ended up on my laptop.

  I was a little scared and worried. I tried to turn on my laptop eventually, but it would power about 3-4 seconds and then crash. So I thought that my laptop has been screwed.

  Hey well a year. I started thinking why don't I just fix it? I really do not have the money to buy a new laptop, and because I get a motherboard for £30 I thought: why not?

  What my question is... My laptop can indeed be repaired by replacing the motherboard?

  I've seen people post online about how it can be fixed by replacing the motherboard, but I'm very skeptical about it incase it is another problem and not the motherboard.

  The computer is 4 years old, so it is not covered by the warranty. And I don't have the money to get it repaired by a professional.

  If someone could help me with this question, I would be very grateful

  change the motherboard on a laptop, it's like change of 99% of the material, so 99% that it will solve your problem.

  in my opinion, I just fix it if I found a very good motherboard cheap, less than $ 150.

• Upgrade Windows 8 / / Touchpad doesn't work is not right - Acer Aspire V5 - 531

  Hello

  Ive upgraded to Win 7 Home Premium to Win 8 Pro using the Acer Windows 8 Upgrade Tool everything was completed with success not at all last night but today Ive turned on the laptop and my touchpad does not work well and the cursor acts as if someone is spinning it around the screen.

  So ive only checked the site acer and theres no update driver Synaptics for my computer laptop so can someone explain to me what I do then as I know it was a synaptics driver when windows is 7, but for now its listed as a microsoft mouse driver and theres no way to update the driver through the Device Manager options.

  Ok

  You need Synaptics Touchpad driver 16.0.2.0

  You can download here:

  http://www.Acer.co.UK/AC/en/GB/content/drivers

  Then selecting Ultra Slim under groups and then ACER V5-531 CHOOSE NOT one 531-g/p or pg as the driver synaptics may not be on their page!

  Download the file run as administrator THEN REBOOT and hey presto your rear driver work again

  While this driver is an an it windows 7 works perfectly under windows 8!

• I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  You can buy or download a copy retail Microsoft windows and install it on your computer.

  You can download and install the device driver windows for your computer to Acer support website.

• Acer gateway ne570 won't boot upward and I tried the bios and it always detects the hard drive

  I have an acer gateway ne570 and it does not start and I tried the bios and it always detects the hard drive but first boot priority is boot windows which is the only thing on the menu Manager startup options when you press on enter where the box "no boot device, press a key" comes after starting the laptop and when the gateway logo appears. I've had for over a year and the hard drive still works and my laptop didn't come with a recovery or recovery usb drive. And I also used the alt + f10 button that linked me right back to square "no boot device, press a key. Anyway, what should I do?

  you need a PC to use the tool of creation of the windows window.

  to boot from the CD or USB, press F12 on startup and choose the correct boot device.

• have we not back up our data to an external device before the update to windows 8.1

  have we not back up our data to an external device before the update to windows 8.1.

  update to windows 8 8.1 will affect the data in the laptop...

  @swati90

  If you upgrade from the Microsoft Store, your applications, data office and personal will not be deleted.

  If you're updating with an ISO will always give you the opportunity to register personal files.

  Error on prudence, I like so I will say that it is not a bad idea to back up important data to an external drive before the upgrade.

• I am trying system restore and it says I have no restore points and will not let me create restore points

  help I am trying system restore and it says I have no restore points and will not let me create restore points
  * original title - find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting *.

  Hello

  1. what exactly happens when you try to create a system restore point?

  2. you receive an error message when you create system restore point?

  3. what operating system is installed on the computer?

  In the event that you use the Windows 7 operating system you can follow the steps below and check if the problem persists.

  Method 1:

  Step 1:

  Locate the service associated with the restoration of the system or Volume Shadow Copy Service is started after the computer is restarted. This service can be stopped by some viruses as well, so you can try to run a scan of your computer.

  To check the service

  (a) click Start

  (b) in the start search box type Services

  (c) click on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Shadow copy volume started Automatic\Manual

  Step 2:

  Also check the dependency services that are required for the System Restore Service run.

  To verify that double-click the service, and click the Dependencies tab.

  This service must be started before the restore point is created automatically or manually.

   

  Method 2:

  Try disabling the firewall and windows temporarily on the computer security software and then try to create a system restore point and check if that helps.

  Follow the articles given below to change the settings for the firewall and security software settings

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note:

  If you are able to perform the system restore after you disable the security software then you may have to contact the software publisher for the security software by disabling the firewall and security software is a potential threat to the security of the system.

   

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• Classic classic BlackBerry frozen during the update and will not turn on or off

  So I was in a wifi zone in a fast food place, and my screen said that I had to update software and because I would be there for some time, I allowed him. He said to date started and then told me that I had to be plugged in for the update, but I didn't have my charger. I don't remember if it continued on its own or if I hit just OK but now it is frozen on the ATT screen and will not shut off/on/restart. If I press and hold the off button, it counts down as if she died but do nothing and I can't use the touch screen to cancel or restart.

  I am very frustrated because I've had problems with this phone since I got less than 2 months ago.

  In addition, he is now connected and still will not do anything else.

• I tried to update and when I try to connect I get "you have been disconnected" and it will not let me go further.  What happens here?

  I tried to update and when I try to connect I get "you have been disconnected" and it will not let me go further.  What happens here?

  Hi Daryl

  Please follow: error "You have been disconnected" whenever I try to connect to the Cloud creative office application.

  See if that helps.

  Thank you

  Varun

• I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D207 error code

  I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D error code

  update by downloading the files directly and then apply them:

  pre cc updates: http://www.adobe.com/downloads/updates/

  CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

  updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

• Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

  Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• I had to replace my hard drive and can not get my Photoshop CS2 9.0.2 to activate.  I tried the phone and the Web site and have both the serial number

  I had to replace my hard drive and can not get my Photoshop CS2 9.0.2 to activate.  I tried the phone and the Web site and have two serial numbers.  I can't find a number that strives to speak to a live person at Adobe.  I need to reduce the size of the pixel today on some photos and need the program.  Is there another way to reduce pixel if I can't get my Photoshop runs today?

  See the page linked below.  Your installation/serail number will not work.  You need to acquire a download for it with a specially assigned serial number...

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• I'm in the need to burn a DVD, I installed the 2014 CC but having to find a DVD burning solution.

  I'm in the need to burn a DVD, I installed the 2014 CC but having to find a DVD burning solution.

  You must download and install the CS6 first as it comes with Encore CS6 - allowing you to make the Blu - ray and DVD

  KR