Why not Time Capsule shows under "other devices" in the Finder?

Similar Questions

• Does not see the utility Airport Airport Extreme or any other device in the House on the network. However, all devices are getting internet.  Backups on external hard drive are going wireless, too. Yosemite day and other software. What should do?

  Said Airport utility cannot find extreme AP, which used to be on the network and shows no other devices on the network. But all devices (MBPro, MBAir, iMac, iPod touch, iPad 2 air2) are connected to the internet. Wireless backups on external drives are being completed. El Capitan 10.11.2; Airport Utility 6.3.6. How do "seen it all" again?

  What should do?

  All you can do is to try to circumvent some of the bugs crawl into El Capitan.

  Given that the AirPort Utility becomes easily confused about what are the devices on the network, it will sometimes help to perform a complete cycle of power on the network. If you want to try it...

  Power off all devices on the network, routers, computers, accessories, mobile devices, printers, etc... in any order you want

  Wait a minute

  Turn on the modem first and let it run by itself for 2-3 minutes

  Then, switch on the device connected to the modem and leaves turn a good minute

  Keep power devices one at a time about a minute out until the entire network is back

  Recheck the AirPort Utility

  If still no luck, we will have to try some repellent on Mac.

• After several years of functioning, my Time Capsule shows a yellow flashing light instead of solid green light.  He always seems to be working, but watch the blinking light.  An update is necessary?

  Time Capsule.   After six years of good operation, my Time Capsule shows a yellow light flashing instead of green light solid.  It seems to work fine, and I tried l ' switch off and restart, nothing helps.  An update is necessary?

  The Capsule of time... and other Apple routers... flashing orange when they have a message for you. To see what it is...

  Open AirPort Utility on your Mac... (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the Time Capsuleand a small window will appear

  If you see an Update button, then new firmware is available for the Capsule of time if you want to install this package. To do this, click on the Update button

  Otherwise, find the Status parameter and then click on the little orange dot it for more information on why the status light flashes, with a suggestion to fix whatever may be the cause

• How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

  Hello

  How can implement you not with Time Capsule and AirPort their simulation on the iMac?

  I don't know what you're asking.

  AirPort Extreme is a wireless router.

  A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

  An iMac is a Mac computer.

  An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

• I created a my page book epub file, and it works perfectly in ibooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  What's not?

  You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.

  The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?

• updated my pavilion tx1000 for win 7 and missing a driver. under other devices - coprocessor... help

  Updated my tx1000 Pavilion to Win 7 and missing a driver I can't find online. The missing driver is listed under other devices and called coprocessor... help please

  Hello:

  Here is the link for the driver you need.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-51717-1&CC=US&DLC=en&LC=en&os=2093&Product=3185028&sw_lang=

  Paul

• Do a clean install on a Dell Inspiron 1525 with Vista... The Device Manager has a yellow labels on all devices under 'other devices '... Unable to connect to the Net

  I did a clean install on a Dell Inspiron 1525 with Vista Home Premium... I can't connect to Internet... The Device Manager has a yellow labels on all devices under "other devices" that includes network and ethernet controllers... Yet the utility on the Drivers and Utilities CD Dell program says that there is a "Marvel 88E80XX rev A01 10/100 ethernet controller" responsible... HELP :)

  Hello

  Use another computer to download and save the drivers to

  copy them to the flash drive and transfer them like that

  Here is the link to the drivers for your model

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=INS_PNT_PM_1525&CATID=-1&impid=-1

  to get help in this matter

  Dell support

  http://support.Dell.com/

  Dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

• Why not wmc7, like vista allow you to browse the internet on your TV for xbox 360

  original title: internet browser for xbox 360 using wmc7

  Why not wmc7, like vista allow you to browse the internet on your TV. I have the Extender plug.

  The Xbox 360 does not support Internet TV content. S.Sengupta Media Center MVP

• MY WEATHER GADGET IS NOT WORKING.IT SHOWS "UNABLE TO CONNECT TO THE SERVICE.

  Original title: WEATHER GADGET

  MY WEATHER GADGET IS NOT WORKING.IT SHOWS "UNABLE TO CONNECT TO THE SERVICE. I TRIED TO CHANGE THE LOCATION, BUT IT IS OF NO USE. PLEASE HELP ME SOMEONE.

  When you click Download and install, click on save, not run and save it to the desktop. It will be a Zip file which you right click | Extract all.

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• Why would a test on an iPad not shared other devices on the network?

  We have a 2 Air iPad and iPad Mini 2, a 2010 MacBook Pro and iMac 2009 beginning to share Safari, mail, contacts and calendars via iCloud. The iMac running OS 10.8.5 and MacBook OS 10.10, two iPads IOS 9.3.1 when an event is entered on any of them except the Air iPad, they appear in the other calendars. A test in all others appears in all four calendars. The timing of the Air iPad seems to be implemented as close I can say in the way that the iPad Mini is set up. How can I convince the tests listed in the Air iPad to show in other calendars?

  On the iPad

  Remove iCloud email/calendar

  Sign up for iPhone

  Disconnect from the iCloud

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  Reconnect

  Re add iCloud email

  See if the synchronization of calendar with iCloud

• Using Time Capsule airport on 2 devices

  for some reason, I have a PET of brain here and do not understand this.

  My wife has a laptop computer macpro she does his grad school stuff on.   I have an iMac.   I also have the time capsules from the airport.  the woman is set up with time machine, it sends data via wifi to the time capsule. It is very good.  The mine records at the same Time capsule airport wireless.

  ME, I would use one different wifi router other than the airport on another network device I have, however, the question is: is it possible that I can keep the wifi for the operation of the Apple device and connect my computer via ethernet to the device for the back upward only, using the capsule on the imac.

  I think I can, but I don't want to screw up the wireless network.

  You can use both ethernet and wireless at the same time... but it becomes complicated with the gateway router and DNS values.

  Secondary wireless router should use another address LAN IP for the TC, so you can separate the two networks.

  This could lead to further questions about the network although because you must plug a router into the other I presume... unless you are completely isolate the TC from the internet or if you have in fact two internet connections.

  Give me the real details.

  What is the second router and IP is running?

  How is the installation of TC and what IP is running?

  Screenshots that make it easier.

  I did a write up with screenshots here, which will give you the basics.

  Time Capsule using wired for Mac for backup only.

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• Time Capsule shows no previous backup

  Previous state:

  -Modem and router provided by the ISP

  -Connected to the wireless network, time capsule backup my retina early 2013 MBP perfectly

  Roommate who owned the modem and the router outgoing - got the new service with only a modem

  Current state:

  -Use Time Capsule as a wireless router

  -Time Machine wants to do a backup complete of any HD on MBP; shows some previous backups, but shows used the Time Capsule disk storage:

  

  In Time Machine preferences, I have two 2 options for a backup drive, both called 'Data' but showing different icons:

  and

  I am pretty confused at this point and don't know what to do.  I searched a lot of things, but can not find someone with this issue says .

  Any help would be appreciated!

  You have massively changed the network.

  So it is little surprise that TM has lost connection. TB is no longer in the same place.

  -Time Machine wants to do a backup complete of any HD on MBP; shows some previous backups, but shows used the Time Capsule disk storage:

  That's okay... because of the new configuration TM cannot detect the old backup, until she starts again. Apple never indicate anywhere... but TM can never find older backups on a network when they moved the place. It is a fact of how works the beastie TM.

  What you need to do, is to be very brave. Feeling brave?

  Select the data... the dancing men would probably be best. (Which means a network of road... wireless icon means a disk on the wireless... and will most likely also work... After all, it's the same thing).

  And TM will say that it will start a new backup in 120 sec (I never understood the timed fuse 2 min. time to clear the building?)

  When TM begins... She will discover that the old backup is always there... Check for fingerprints... I own it... Check it against your current hard drive... If all extracted TM will then make an incremental backup... You are reconnected to your backups... woo hoo!

  In case of failure... you will have a new backup and an old... It's also very well... wait a few weeks or a month or two... and then you can remove the old backup of the TC. Or store it on a USB key if the atmosphere is for old things.

  Apple documentation for most things is now seriously lacking. All the technical aspects are hidden from the great unwashed.

  Pondini was our guru until he died, but what it produces is always extremely useful.

  For your problem B5 and B6 here are relevant.

  http://pondini.org/TM/troubleshooting.html