Why Pavilion 734n seems not to accept RAM ECC?

Similar Questions

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• Why 10 items does not accept my password when he has done it before?

  I have tried several times to put the password when opening 10 elements.  He would not accept.  So I decided to get a new password.  By filling in the outline, they want you to click Yes in the personal URL.  Which means I assume you put your images on the sea for others.  I don't want that. I understand that.    [email protected]

  Double post.

  Please see:

  Why 10 items does not accept my password when it before dd

• HP Pavilion a6000n desktop: adding false graphic RAM and freezes start.

  Well, I'm back with the same machine as the previous assignments.  I ordered the recovery of Surgeons of the computer disks and that they were unnecessary because the computer does not see any cd/dvd I have to install.  Finally gave up and ordered a Windows Vista recovery usb flash drive and installed the operating system.  I used it very well with the RAM minimum (1 GB).  I decided to upgrade the memory to use all 4 GB.  All four are recognized in the BIOS/Setup with the full 4 GB dispalyed.  The new brand of memory is Samsung.  Everything seems to be as it should.

  Here's the problem: the Windows splash screen appears with the scan progress bar and when it gets to the sixth pass it freezes as black and alternating vertical lines distorted graph color vertical lines appear.  It will remain so until I have shut down, because he has not answered all the keyboard commands.

  I removed two 1 GB modules and restarted without problem.  I've tried three, and he did nothing.  Swapped the output for the two 1gbs modules, I removed and they worked perfectly.  With four on board is the problem presented and only when windows is loading.

  I also tried safe mode.  All four ram modules work with the VGA drivers in safe mode without graphical distortions or freezes.

  I tried to restore the computer to an earlier time with the console of Windows Vista repair because he found from the problems and suggested this course of action.  When I did, he removed my Firefox browser.

  Has anyone seen this problem before or a solution?  Thank you for help.

  What follows is my computer information system:

  Name of the Microsoft® Windows Vista™ Home Premium operating system
  Version 6.0.6002 Service Pack 2 Build 6002
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the system
  System manufacturer HP-Pavilion
  System model RX885AA-ABA a6000n
  System Type X 86-based PC
  Processor AMD Athlon (TM) 64 X 2 Dual Core Processor 4200 + 2200 Mhz, 2 Lossnay, 2 logical processors
  Version/Date Phoenix Technologies, LTD 5.13, 29/10/2007 BIOS
  SMBIOS Version 2.4
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.0.6002.18005".
  Username
  Daylight saving time from the centre of zone
  Physical memory (RAM) installed 2.00 GB
  1.87 GB total physical memory
  Available physical memory 775 MB
  Total virtual memory 3.99 GB
  2.49 GB available virtual memory
  Page file space 2.17 GB
  Paging file C:\pagefile.sys

  HP Pavilion a6000n specifications

  Before that I inform you of why 4 GB will not work, I will inform you of the steps, I took in coming to my conclusion.

  First of all, I found an old PCI VGA card and installed.  Then I started the installer and changed to display pci dashboard.  F10 save and exit.  I left Vista find the new hardware and drivers.  Power off and swapped the cable from the monitor with pci card.  Restarted.  Last good known Configuration.  Made to the desktop with large icons, display etc.  Power off.  Installed all four modules of memory of 1 GB.  The installer confirms the mms of 1 GB in all four banks.  Save and exit.  A frozen fourth passage on the starting Windows progress bar screen.  Display is now less than a hundred multicolored pixels (it looks like stars in the night sky) scattered across the screen with barely perceptible ms inside progress bar.  Killed power as no response to input devices.  Modules removed from DIMM0 DIMM2 (banks 1 and 3) and installed two 512 MB mms instead.  Power, entered installation.  Confirmed 1 GB, 512MB, 1 GB, 512MB in DIMM0-4 (banks 1-4).  Save and exit.

  Eureka!  Starts directly on the desktop with no complications.  Vista even automatically the Resolution 1600 x 900 display value.

  Power off.  Remove the PCI card.  Has changed from the monitor to the integrated connector cable.  Powered on the Setup where I changed the display on board.  Saved and get out.  Straight to the desktop.  All right.  Vista indicates on the installed 3,072 GB 3.0 GB.

  I had read a useless article on the HP Forum that said that HP had made disappear the memory alternative banks.  Thank you for that.  Thanks kaoutar to straighten me out on this.

  After studying the limits of memory on Windows os systems, I made a discovery.  Due to the limitations of physical or software address, Vista cannot use 4 GB RAM in the 32-bit operating system.  You must install os 64 bit where it can use 8 GB to 16 GB.

  Here are a few discussions of support, I found to cooberate my conclusion that 4 GB will not work on this computer, as this is with Vista 32 bit installed.

  Thanks for the reply and assistance Erico.  Installation of Bank alternation of RAM modules corresponding coupled to the reduction of two of these 512 MB back is the solution.  It was an error of installation of equipment so many restrictions imposed by hardware and software manufacturers.  If I or anyone else, wants more RAM under Vista or 7, will need the 64-bit versions.

• Tecra 8200 does not recognize the RAM in Slot B

  Since a few days my Tecra does not recognize the RAM Module in Slot B. Before everything was fine. I have 2x256MB Modules. I was wondering why my Tecra becomes slower, the last days, and then I saw that I have now only 256 MB of RAM. I have change the slot Modules A to B. I checked also the two modules of RAM with MEMCheck. Both are ok! Just at the moment where I put a RAM for Slot B and none in slot A my Tecra won't start! If I insert the two module my Tecra boots but with just 256 MB of RAM.

  Is there another solution then buying a new laptop? Is my Mainbord damaged?

  I was so contently with my Tecra ;-) so far

  The slot B is probably defective. Only solution for me is to buy compatible 512 MB module and use it in A slot. According to specification for laptop, your device can handle with max 512 MB of RAM.

• When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its id.

  When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its ID thanks

  It seems that if the application has been downloaded on his iPad while it is connected to your Apple ID. If so, he'll always want to be updated with your Apple ID.

  You must remove the application from his iPad and then download it again while it is connected to its own code of Apple.

• HP Deskjet 1010: Why HP 61xl will not work in HP dj1010?

  Why the HP61xl does not work in my printer HP1010?

  The HP SureSupply site here says the right cartridge for the 1010 Deskjet is 61, it seems that this printer does not support the 61xl.

• Who is Pagesand why they are looking for my acceptance?

  Who is pagesand why they are looking for my acceptance

  Greetings Gilbe'rt,.

  Pagesand is a service that is used for your default homepage in your browser web and has a carousel of the most frequently visited sites on the internet, you can join by simply clicking the icon of the site. Pagesand also a search box has very practice that will jump you directly to what you are looking for on the Internet.

  With the help of Pagesand is optional, of course, but I hope that you will give it a try and see if it works for you. Tens of thousands of others already Pagesand being a valuable resource.

  If you have any other questions, do not hesitate to contact us via order (at) pageset.com.

  Best regards
  Eric

• Why Hotmail email does not work?

  It seems not to come at all and says that there is a connection problem.

  Have tried several times... .with without success.   Also tried Windows Live Mail with

  the same thing without success.   Problem seems to be related to the Hot mail problem.

  Why it does not work?

  k

  Hello

  Hotmail, Outlook andconnected services are all down. If you want to check the status of these services, see the link provided below.

  https://status.live.com/

• Pavilion dm1 touchpad not working not

  Pavilion dm1 touchpad not working not not using windows 7 Home Edition.
  In Device Manager, I see that the external USB mouse, witch synaptic touchpad does not work.
  Can someone help me please.
  Did all the updates that are offered by HP

  Hello Terry,

  Thanks for your help but the touchpad seems to be defective.

  I use a usb mouse.

  Kind regards

• does anyone know why myhealthyvet.gov is not accessible

  all the computers in the House happens "cannot display this webpage" why

  It seems that there is not. I get: Sorry, the website myhealthyvet.gov can not be found.
   
   

• Why lately company does not release smartphones with screens 4 inches?

  Good evening!

  Why lately company does not release smartphones with screens 4 inches? Me as a person with small hands, it is very difficult to work with models even 4.3 inches.

  Now, I have Sony Xperia P. Very comfortable: fit to display me size metal case. Everything is fine except for the inserts in plastic (lower part). Shabby paint with these pads. Now, the phone looks not very nice. So I thought to change towards a new model. Because the phone close to 3 years.

  Expected to soon release a smartphone with a diagonal of 4 inches? (And in a metal box).
  Thanks in advance for your answer.

  Hi Valeria! You can share your suggestions on the Sony Mobile community here. Thank you!

  If my post answered your question, please mark it as "accept as a Solution.

• Why the effects do not work on still images.

  Why some effects do not work on still images?

  As the active camera or earthquake?

  It seems to me that to have an earthquake or the busy camera, a series of images will have to be moved by the software.  In other words, you need a video clip with separate images.  A still is an image.

  You might be able to get around that.  Place your image in a dedicated project, a video share/export.  There will be many executives you need.  Report a project like the video rather than as a still.  Then you should be able to apply your chosen effects.

  I did not had time to try it, but I think it should work.

  Bill

• Why my iMac does not automatically connect to my Airport time capsule.

  Why is my iMac not automatically connected to my wireless after waking up, since I upgraded to OS Sierra?

  Hi kamoore65536,

  Thanks for the upgrade to Mac OS Sierra! I understand that your Mac does not automatically connect to your airport after waking up from his sleep. There may be several reasons why this may happen to you. You can try to run Wireless Diagnostics to see if macOS Sierra can automatically fix the problem. If the problem cannot be solved with Wireless Diagnostics, make sure your wireless network is at the top of the list of your favorite network settings. You can also try to clear your list of preferred networks, and then re add your Time Capsule.

  Search for Wi - Fi using your Mac problems

  macOS Sierra: choose the preferred Wi - Fi networks

  This should have your Mac connecting the airport automatically as it did before. Please use the Apple Support communities to post your question.

  Have a great day.

• Why when in a not tab home page and I click on the Home icon, FF will print what is in the current tab and will not go to the home page.

  Why when in a not tab home page and I click on House icon, FF goes for what is in the printing tab and when I cancel the preview before printing, FF does not go to home page back to Homepage no tab.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?