Why pictures start automatically on reboot? I never use it and it does not appear in the startup folder.

Similar Questions

• Windows Fax and Scan does not appear in the start menu

  : I'm using Windows Vista Home Premium and you want to (a) send faxes via a modem local fax and b scan docs from a local scanner. I mean, there should be a program Windows fax and scan shown in the start menu. I clicked all programs on the start menu, and it doesn't always show. Suggestions?

  From: Hal

  Fax and scan is available in Windows Vista Business and Ultimate editions, it is not available in any of the Windows Vista Home editions.  Since you have a version of Windows Vista Edition family, the only option of fax is a third-party product.  These products work under Windows Vista:

  Snappy Fax

  http://www.snappysoftware.com/

  RKSFax

  http://www.rkssoftware.com/rksfax/overview.html

  VentaFax

  http://www.VentaFax.com/

  FaxTalk FaxCenter Pro 7.5

  http://www.FaxTalk.com/products/ftfcp/index.htm

  I have seen reports that the free version of BVRP also works with Windows Vista:

  http://www.usr.com/BVRP/bvrp.asp

  BVRP PhoneTools

  Given the above comes with the new USR modem, I don't know if it will work with no - USR modems.  Alternatively, you can send faxes via your Internet connection provided you are willing to pay for an Internet E - Fax service:

  http://www.slipstick.com/AddIns/services/fax.htm#internetfax

  Personal Fax Services - Internet Fax

  http://www.Savetz.com/fax/

  Another response of the community of Windows Vista discussion groups

• PowerShot A630. In automatic mode when 'pull you' touches half green box does not appear

  PowerShot A630 in AUTOMATIC mode when the 'shoot' button is pressed to halfway the green box does not appear. The indicator flash shows and the photo will be shot. Everything works normally, the photo looks OK.

  Your property clean, Ok if the camera is still under warranty, I suggest you start a repair request with Canon and give them a call. They might even know some obscure affecting somewhere... Oh have you tried to do a "reset all" to 'reset to defaults', according to it is called through your settings menu?

  Despite this, it would be a good idea to get this folder with Canon problem

• The mouse cursor does not appear on the center of the screen to start upward.

  The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

  The mouse cursor does not appear on the center of the screen to start upward.  If the mouse moves a mobile cursor appears in the upper left corner of the screen.  Have to keep rebooting until the mouse cursor properly supported.

  Suggestions:

  Go to Safe Mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. Use the up/down arrow and selectSafe Mode with command prompt.

  1. in safe mode, please do a system restore. Choose the date where you did not have this problem as your restore point.
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  2. always in safe mode, do a check of the file system. See if file check will check for corrupted files and repair them.

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I work to integrate AD with ADC, but there are a few users that does not appear on the ADC. Someone knows why?

  I have an ASA 5515 with module CX and I m trying to configure rules based on users of the AD. I have instaled CDA (context Directory Agent) and is integrated with AD and module CX and ASA and I have also set up rules on the ASA and module CX and works well. The problem I have is with users who does not appear on the ADC. When the user is on CDA is OK. But I should have more less 250 users on CDA and I only 171. I restart PC users doesn´t appear and after reboot, some users appear and others do not. Anyone know why this behavior?

  rgoncalves

  You can check a few things? Software version CX and your version of the ADC? Also do you have more than one domain controller in your environment? Also what version is DC?

• Recently I have not been able to forward my iPhone 5S for message store.  I've never had this problem before. When I looked to what to do, I realize that The Call Forwarding icon does NOT appear in the status bar when I try to transfer calls.  How c

  Recently I have not been able to forward my iPhone 5S for message store.  I've never had this problem before.

  When I looked to what to do, I realize that The Call Forwarding icon does NOT appear in the status bar when I try to transfer calls. How can I fix this please?

  It does not work using * 21 * + 6 * 41412 * 2 #.

  < personal information under the direction of the host >

  Call forwarding is a function of carrier. Contact your operator.

• Why the Satellite L650-116 does not appear on the list of products?

  Why my notebook l650-116 does not appear on the list of products?
  It does not appear even with the auto detects the program located on the site.

  Hello

  I put t know what you mean?
  SATELLITE L650-116 is a European model for Toshiba laptop. But this L650-116 has been published for example in Cyprus.
  You can find the details on the Toshiba Cyprus page
  http://Toshiba.com.cy/pages/en/toshiba_products/laptops/satellite.php?prod=197&cat=2

  In addition the L650-116 belongs to the PSK1JE series if you need drivers, you must choose L650 PSK1JE

  Welcome them

• CD rom does not appear in the start menu in lenovo G500 windows 8

  Hello
  I want to format my lenovo G500 windows 8 and install windows 7 but I can't because the CD rom does not appear in the start menu

  Hi obaid, welcome to the forums.

  you will need to change some parameters in the BIOS, these changes are explained below related to the thread.

  http://forums.Lenovo.com/T5/Lenovo-3000-and-essential/downgrading-from-Windows-8-to-Windows-7-on-Len...

• Hibernate button does not appear on the start menu

  Hibernate button does not appear on the start menu

  Hibernate button does not appear on the start menu

  Here is the link to MS Help and support about the case.

  http://support.Microsoft.com/kb/929658

  Note : scroll down for more information and find out if your computer supports the hibernation.
  Note: If the computer does not support the hibernation feature, you cannot enable the feature.

  t-4-2

• Windows XP Mode does not appear in the start menu after installing it successfully

  Original title: xp mode w7pro

  try to install xp mode/virtual pc on 7pro. down loaded and ran but does not appear in the start menu.  Active virt.tech. in the bios on a thinkpad x201i.

  First Install Virtual PC and following the XPMode.

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• After the installation of Windows Virtual PC on my Windows 7 Ultimate 64 bit system it does not appear in the start menu. How can I fix this so that I can run Windows XP in Windows Virtual PC?

  Windows 7 Ultimate 64 bit running on an Intel i7 2600 system with an ASUS P8P67 motherboard.  Intel virtualualization has been enabled in the bios.  Windows XP mode has been installed on the system and the operating system has been updated with Service Pack 1.  Windows Virtual PC has been downloaded and installed, but does not appear in the start menu in the programs list. Now download for Windows Virtual PC will not allow to install another, nor that the first installation can be uninstalled because it is not on the list of programs. Virtual PC folder of Windows in the Program Files x 86 folder has only a folder with two files integration components; IntegrationCompnents.iso and Precompact.iso.

  It should be in the menu... Virtual PC / XP Mode or something. I don't know, I don't use win7 atm

• The start menu and taskbar does not appear.

  original title: the start menu and taskbar does not appear.  IM on windows 7.  Any help please?

  The start menu and taskbar does not appear.  IM on windows 7.  Any help please?

  You can try to leave Explorer yourself.  Here's how:

  1. Press Ctrl-Shift-escape, which should open the Task Manager.
  2. On the file menu, choose new task.  Type explorer.exe and press ENTER.  The taskbar and the desktop should appear.

  However, this is not a permanent solution.  My best advice to you would be to use the system restore to go back to one hour before the beginning of the question.  This restoration process takes about 2 minutes and will not lose one of your folders: it restores only the settings from the system to a point in time that you choose (you can 'come back' as little as a few hours or several weeks).

  To do a test, follow the steps below.  I guess that you are unable to reach the taskbar for the following steps:

  1. Press Ctrl-Shift-escape, which should open the Task Manager.
  2. On the file menu, choose new task.  Type rstrui.exe (this name is for 'restore user interface').  When you click OK, the system restore should start.
  3. Through the system restore program, you will choose a time to come back. When you have completed the program, your computer will restart with the settings at this time.

  Please let me know if it helps.

• Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  It was the strangest thing, but I think I solved the problem. Use the CC version 2015.1 on a Wacom tablet using Win 8.1 and inadvertently from the same batch of photos, I had downloaded twice and it was very confusing because it did not prevent the duplication of files, but the files where not really there. I didn't know whether to remove or delete the files with question marks for fear of destroying a link or something so merged files and now everything works as it should, once chosen in the library that the photo appears in develop mode.

• 2014 CC Photoshop does not appear in the extensions Manager, why?

  I have the same applications on my desktop computer and laptop, but Photoshop CC 2014 does not appear in the extensions on the cell Manager. No idea why?

  Please check that you have updated the CC extensions to 7.2.1 Manager. If so, please refer to the Re: why I don't see InDesign CC in my extensions Manager CC.

• Why channel Volume does not appear in the Panel of the applied effects (first 12 elements trial version)?

  Hi people

  doew anyone know why Channel Volume does not appear in the Panel of the applied effects (first 12 elements trial version)?

  Thank you very much in advance

  Adam

  adamPREMIERE

  I have the book, but this screenshot has been extremely help.

  The answer is...

  Like I said, the default Panel in the range of effects of applied effects/Applied / Motion and opacity.

  Once you apply fx effects Audio/Effects/Channel Volume effect to your audio clip, you will see the channel Volume Panel in the Palette of effects applied and the movement and opacity.

  I'll give you screenshots if necessary.

  Please try to prove guilt.

  Thank you.

  RTA