Why preview iOS app is stuck on the screen "Loading your image?

Similar Questions

• Help! My Apple Watch is stuck on the screen of weekly activity

  Hello

  My Apple Watch is stuck on the screen of the weekly activity. I tried setting down, I tried the button dial spinning and nothing. There is no done either button. Do I let my Apple Watch lose all batteries, or is there a way to solve this problem!

  Hello

  There should be a link to the upper left corner of the screen.

  Even if you don't see (after verifying that you have reached the top of the summary page), try to tap into this area to exit Preview.

• Stuck at the screen 'failure of Windows update Setup.

  I have reset my laptop Windows 8 and downloaded the updates required for Windows 8.1. Then I had to reboot my computer and configure updates. Now it is stuck at the screen 'failure of Windows update Setup. He has already restarted once and is back on the same screen. It is an Asus laptop and from what Ive read, this is not exclusive to all laptops Asus. I do not have any disk installation or any way to activate Safe Mode as I have tried (in fact something that requires search or any key entry does not work). I hope you guys can find a soultion, thank you

  EDIT: I think that now it's in a forever continuous reboot, preparation configure updates, failed comfiguring cycle of windows updates.

  Hello

  What is the full error message? An error code is displayed with her?

  Why did you reset the computer? You had problems?

  This problem could be caused due to some incorrect settings or due to a compatibility issue. I suggest you try these steps in the following article and check if the problem persists.

  http://support.Microsoft.com/kb/949358/en-us

  Keep us updated on the results.

• iPad2 9.3 upgrade stuck at the screen of the unavailable activation server

  I tried an ota on my iPad update 2 and it is stuck on the screen of activation with an error message - activation server is temporarily unavailable. tried rebooting, connect to iTunes - nothing works... Any help on this would be welcome.

  BTW... my iPhone6 and mini ipad updated very well...

• Stuck on the screen of HP recovery and cannot start windows

  HP Pavilion
  Model: 17 - 1215dx
  
  If you need the serial number or the fn, just ask. I didn't post too much sensitive information.
  
  It was originally 10 64-bit windows... but now has 8.1 Windows 64-bit
  i5 8gig of RAM processor
  
  Literally just close the lid and open it upwards and it wouldn't boot windows. It is stuck at the screen HP saying it's diagnose my problem. Tried a soft reset and a hard reset when you remove the battery and put it again while it is unplugged. Did not help. I can't start in safe mode. I tried to do a restore which has been a success but it restarts when he says "there was a problem, restart your PC. I'm frustrated and reset a factory and the same factory reset was successful and was when he came back to 8.1 because it's the OS, I bought it with but then it still wouldn't let me in windows. I was going to try and start to repair, but if I had known this would require an administrator I'd never have done the factory reset. I know I've been reckless, but I just wanted to work. But yes, I don't know what the problem is. I feel like if it was a hardware problem is just something to keep windows to operate. Should I try a repair disk? Would that help?

  The SecretLight

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post you need to grab your laptop and wanted to help - but we need more information.

  You said that your laptop came originally with Win10, but then later, you said you tried to go back to Win8.1, you can then said, it's the original OS.

  So, who was the original - Win8.1 or Win10?

  Ask because if it came with Win8.1 and you UPGRADED to Win10, while Microsoft tells you that there is no risk in the upgrade of Win10, because they allow you to believe that you can always go back to your original OS and setup within 30 days, the ugly matter faction is that the Win10 GoBack feature turned out to be unreliable - and when it fails She can let the machines in a corrupt State - which is not always the case, it happens often enough to be a problem, but you will get no warning beforehand that he goes to the trash your PC!
  
  The Win10 upgrade is known, in some cases, corrupt the partition of recovery that are stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.
  
  What will work restores your computer to its original factory state using HP recovery media. It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Stuck at the screen of the POST - R500

  I have a R500 that one of my users has me just. It is stuck on the screen of the POST (ThinkPad splash) and does not respond to any keys pressed. I tried holding down the blue button "ThinkVantage" while turning on and still no response.

  I pulled the hard drive and plugged into another machine to be excluded as a possible problem. Which works very well. It seems that the system must be suspended during any of these POST I can't even access the start menu or the BIOS settings.

  Any help would be greatly appreciated so that I can get this user online.

  A quick search on Google and I've already found my solution. A broken USB port is to blame. Looks like it's a problem on early model R series machines. Here is a link to the post where I found my solution.

  -Kris

• B1 - 710 stuck on the screen 'formatting data"after trying to do a factory reset.

  After occassionly gel to start the past two weeks, causing necessary reboots, the tablet in a loop start.  The last time this happened, about a year, a factory reset solved the problem. This time, however, the Tablet is stuck on the screen layout of the data. Now, even holding the volume up button and the power button on the system goes back to the screen set data formatting and nothing else happens.

  Is it possible to retrieve the tablet or is - this one probably a hardware problem?

  It seems a hardware problem, to be honest, but may also be a corruption of OS/recovery if you are still under warranty, support Acer a call.

• computer is stuck in the screen that lets you choose Safe mode or start normally

  Original title: stuck

  My computer is stuck in the screen that lets you choose Safe mode or start normally. When I choose that it just goes back to the same screen. stuck in this screen

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• Weather gadget stuck off the screen

  I installed Vista to Windows 7 on my Dell laptop. The Weather Channel gadget is stuck off the screen, with only a small part visible. I can't move it, but I can open it from the small arrow is the only thing that I can see. How can I take off it to move on the desktop?

  Hello Smarski,

  I don't know what you see for the arrow. I installed the Weather Channel widget and find the normal buttons, including relatives, gadget drag more big size, Options. Try to right-click on it and using the menu shortcut or select move and move the gadget, or select close and then open again to place it in the default location on the desktop.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Enterprise - screen is stuck on the screen 'your computer is locked.

  Hello

  I have a computer for no reason while not using it decides to lock and stuck on the screen "computer lock you."

  I already have several times, power options changes since I work in a corporate environment all the machines are defined with the same question. All the computer we have, this is the 1st time that this issue has already shown. Do not know what could be causing the computer to be lock up on this screen.

  The computer in question are pushed constantly updated and have all the updates of the system. It is a desktop Lenovo M93p 8 GB if ram and a 256 GB SSD running off a Core i7. A reboot clears the problem for a while, but do not recur.

  Event logs see the errors for Schannel, application of group policy management and a problem of Netlogon. Not sure if they are related to the issue.

  Any help will be appreciated

  Hello

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Windows Update is stuck on the screen check updates for more than an hour.

  Original title: Windows Update problems

  I just got a new update for Windows 7 and got all my drivers installed. However, Windows Update is stuck on the screen check updates for more than an hour. Everything works except that, and I don't know how to fix it. It has updated two things: the Windows Update Agent 7.6.7600.320 and update for Windows (KB958488). He continues to seek constantly and never find anything.

  Please leave for 5 or 6 hours and if he doesn't find anything:

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• BBM BBM stuck on the transfer of your data from bbm surveys

  Hoping someone has a solution. My jump of BB's stuck on the transfer of your data from bbm surveys. I tried everything I know how to deal with a BB, which is not much. And everytime I open BBM it goes to the spinning wheel and glued on the transfer of your data from bbm surveys.

  Thank you

  DGF

  Hello DGF

  We knew the things you tried to solve this problem?

  Below KB explains on the symptoms of the error when installing BBM, which may apply to your question.

  You must use only mobile data and turn off WiFi when installing BBM surveys. If the problem persists, use a WiFi connection and disable mobile data.

  http://support.BlackBerry.com/kb/articleDetail?articleNumber=000035294&language=English

• The computer is stuck on the screen of the Aptio Setup utility.

  My asus laptop is stuck on the screen of the utility facility aptio how this return to the start screen

  Here is the Article of the same

  Try a 2nd

  • Stuck on aptio Setup utility, cannot close the Setup utility...
  • [Aptio Setup Utility] ASUS N56VJ need help - Windows 8
  • Aptio Setup with a keyboard utility no longer
  • Can't get out Aptio Setup Utility screen
  • My X502C Asus Notebook is stuck on Utility Aptio Setup

• stuck iOS apps to install on the device (ios 8.4, code 6.4, MAF 2.1.3)

  I tested the deployment of two different applications for iPad/iPhone: my own as well as samples of Public: HelloWorld.

  I get the same result in both cases.

  They are deployed to the device and then the icon remains dark and if I type it crashes with "installation".

  I've tried resetting, removal and reinstallation, all in the same direction.

  I confirmed the provision cert and the signing identity is correct (or they wouldn't be at all, to deploy as soon as?)

  6.4 XCode

  iOS 8.4

  OSX10.10.5

  12.1.3 JDev

  MAF 2.1.3

  device was not registered with apple:

  Getting started with iOS Devices

  To install the apps and pré-versions IOS on a development system, you must first register this device using its unique device identifier (UDID).

  Save devices with Xcode

  Xcode is the best way to save your iOS device. Connect your device to your Mac and click on use for development in the Xcode Organizer window. Log in with the Apple ID associated with your iOS developer program membership and Xcode will register the UDID of your device to your iOS development team.

  Manually register the devices

  If you want to download multiple devices IDS, professional and team canmanually register devices.

• App Store stuck in the update loop

  I use El Capitan 10.11.6 on a MacBook Pro for mid-2015.

  The AppStore automatically updated the operating system and a few apps today (2016-09-13). But the badge on the dock of the AppStore icon remains stuck at '1' indicating a waiting for update. This update uninstalled for iTunes 12.5.1.

  By clicking on the "Update" button next to this entry causes the app download slowly. Once the download is complete, the led shows "install...". "- but only for a few seconds. The installation runs. The badge of the AppStore never clears. The App Store still shows the 12.5.1 iTunes update is available. However, there is apparently no way to install it. I can click on the buttons to update again, but then he has just the same: downloads, tries to install and fails without error message.

  What now? I checked the obvious culprits (for example in ensuring the app iTunes is not open, reboot, etc) but no luck.

  FWIW, I also have a version of Parallels of El Capitan, which runs on the same machine. He knows exactly the same problem.

  Thank you.

  Restart your Mac, then check the App Store for the update of iTunes.

  You may resume the download.