Why QOS is assign a low priority to speakers/Media Players?

Similar Questions

• Why the volume is so low when I use Google on my iPhone 6?

  Why the volume is so low when I use Google on my iPhone 6?

  When you use Google to do what? Are how much you referring?

• Why is the sound so low while streaming video on Apple TV

  Why is the sound so low while streaming video on Apple TV? Seems to be much lower sound streaming of netflix, hbo go etc and then watch regular television or playing music.

  Describe your configuration:

  What model ATV and what cables used?

  When streaming video, you use Airplay or apps on ATV?

  You use a receiver, bar the TV speakers or sound?

• Install programs with low priority - priority of the change of Setup

  I'm trying to find a way to change the priority of a Setup program when installing a program, in this case, iTunes to a lower priority. I just want to lower the priority of the installation process, not the software after installation.

  During the installation of iTunes, or any other software on my computer is always everything else slow to respond during the installation process. I want to install iTunes while I use the computer for other things such as Excel.

  I know how to change the priority and affinity of the Task Manager, but I'm still not sure what process is the installer. In addition, sometimes I want to kill installation if a piece of software if it hangs or slows down the computer.

  And Yes, I know by restarting the computer, close all other programs, making sure that Windows is up-to-date, and general computer maintenance/improvement will help, I just want to see if this is possible.

  Any advice?

  What is features of your computer?

  Install programs is usually an event at that time.

  My best recommendation is to update a program such as iTunes during off-peak hours. If for example, don't do it for a major project, do it like at night when you go to bed or go to stop the machine.

  Try to change how the resources used to install the program could have a negative impact on the success of the installation. In addition, you don't need to install the latest version of iTunes. I have an old version and functions very well.

• How to set a user to a lower priority requests

  Am I right in thinking that the only way to take a single user and say "set the requests made by this user at a lower priority than everyone" is to implement the resource manager?
  
  A client is implementing a new reporting system and want the user account to run at a lower priority so it isn't impacting operational work of the database. I think RM is the only way to do this, but if there is a simpler way which does not imply the setting up of RM, I would be interested to hear.
  
  Thank you!

  RM seems to be the best option to achieve this. We have been using RM in our production database and have not experienced something weird so far.

  What is the average usage of the CPU in your server?

  Point (s) to know about RM:

  If your server is inactive, no process/user/schema is prioritized. All users will appreciate its full share. RM will give the blow only when your CPU usage is high and this seems logical. You would be the priority connections/queries only when you run short on the resource. This means that when your machine already has shortage of CPU, RM catch a piece to prioritize other users.

  Asif Momen
  http://momendba.blogspot.com

• Windows 7 - why the priority of network adapter is ignored when you are connected to the area on a lower priority NIC?

  I have two network cards installed on my laptop.  I wanted to test and see how Windows 7 Ultimate managed the priority of the network adapters so I connected to a small Internet (NIC B) router, and the other on my domain (NIC A).
  First of all, it was a pain to find network adapter priority.  After some research and fun Google I found this.  Unfortunately, the search bar has not helped.
  Control Panel-> network and Internet-> view network status and tasks-> to modify the adapter-> Hold down 'alt' to bring up the menu "File"-> select 'Advanced'-> select 'Advanced settings' in the menu drop-down-> adjust your priorities of the adapter in the 'Advanced settings' window, under the tab "maps and links.

  With "B NIC", defined as the highest priority, I tried to browse the internet.  It was impossible to travel.  Then I disabled 'NIC A' (the NIC domain) and I can browse the internet.  Windows XP he handled this much better.

  Select 'NIC A', and then check 'NIC B' is the highest priority.  Then try tracert on www.google.com.  It refreshes my domain as the first hop router.  It seems to be completely ignoring 'NIC B', unless I have disable 'NIC A' completely.

  In case someone of another Vienna here, looking for the answer to this, as I did, I thought that putting the real solution to this question.  Many web pages say to change the priority of going on network connections and change the order there to what you like.  You don't have to bother with this setting.

  It does not work. He has apparently no effect on the use of connections.

  What Windows actually uses is the metric value for network connections.  The lowest metric value is tried first.  In my case, I have a connection broadband shabby home, but I can attach wireless on my phone for occasional good bandwidth.  So, I want to always use the connected wireless and ignore the wired connection, but still the chance to printers and other things on my network cable at the same time.  I want to keep both on and not to disable the wired when I use my phone.

  To resolve this problem for real, go to and right click your Wi-wired adapters and one at a time to change the properties.  Select IPv4, click and then .  For each of them, disable the "Automatic metric" checkbox and set the metric value manually.  I put the wireless cable and 1-2, which gave me the behavior I wanted.

  The Automatic metric is defined by Windows based on the speed of connection and a wired connection is generally faster than a wireless one.

• Why counter traction task produced low?

  Joined a vi that has a task to analog input, triggered by a meter output. The meter has high idle state and responds to a push button on the front panel by a low pulse of term. This material controls output to the system under test and is also used to trigger the task to HAVE it. The problem is that from the task to HAVE it pulls the output low counter. I use a USB-6341 device, which the meter output is PFI13. When he looking on scope, I saw a few unexpected bahavior of the output of the counter. I put the meter output in analog input and track resulting is displayed on the front panel:

  

  The meter output is low due to the task of GOT it, then at the start of the task of meter output it goes high (resting State) briefly, then makes the desired low pulse this task triggers the AI, returning to high. The problem is that it then goes low when the task to HAVE it is restarted (not visible on the front panel). I need this line to stay high all the time except during the desired pulse. I have found a workaround by the AI of PFI0 of trigger job and routing PFI13 to PFI0 internally, but I do not understand why the version posted here does what he does. A trigger line must be an entrance to a task of GOT it, and begin the task should not affect his State.  I thought the task of AI may use the meter so I tried using a different counter but got the same results. Using a trigger to start with no samples before release did not have either no difference.

  Richard

  Hi Richard,

  Digital lines actually have 3 States:

  1. High output
  2. Low output
  3. High impedance (input)

  When you use the PFI line for an input trigger, the typical desired state would be high impedance.  X series cards use an internal resistance of the drop-down list of ~ 50 kOhm, pulling the line low when it is configured as an input.  Engage the task of GOT it, which is to set up the PFI line as input.

  If you want to trigger the analog task on the output of the meter, I suggest to use the internal output of the meter without going through the PFI lines.  You need to activate produce terminals via the right-click menu on the Terminal control DAQmx / constant:

  

  In this way, the meter may continue at the exit on the PFI line and the task of the AI don't tent not tri - state PFI line.  You don't have to do all the external connections.

  Best regards

• Why the hard drive does not priority over everything else.

  I have a problem that probably relates to Firefox 6, but has happened at another time.

  Without apparent reason, disk hard activity becomes suddenly constant, and the computer stops responding.  I have Process Explorer running that shows the use of the CPU by about 10 percent, but the drive can thrash away for 10 seconds, minutes.  It is not yet sensitive enough to close a program or to bring up the Task Manager.  The last time it happened again several minutes slow finished clock.  So I have to hold the power button until it turns off.

  So my question is, any specific problems I have, why Windows is programmed so that the hard disk (celebrates the slower component in a computer) takes precedence over things in RAM?

  If it is associated with Firefox, you can try to start firefox in "safe" mode
  Start-> Run-> firefox-safe-mode
  Which starts Firefox with all the modules and Extensions disabled.  It could be that one of your modules or extensions are not compatible with the new version of Firefox.  After startup, you can turn some addons and extensions via the Tools menu Addons->.

  After thinking about this topic, I agree with your assessment of virtual memory.  It could slow things down, but not at the point of the clock, waste of time.

  Your comments/output of the chkdsk operation is recorded in the application log.
  Start-> Run-> "eventvwr.msc".
  Then click on 'Request' in the left column.  CHKDSK results will be scored with the 'Winlogon' source and tested as 1001.  Only the first bytes of the report are saved.

  You don't have the command line option to start with a higher priority process Explorer via the "/ p" switch (see the help screen).  I'm not sure if a query of e/s of a higher priority task will get in front of the existing entries in the I/O queue.

  HTH & good luck,
  JW

• Why attributes are assigned only to the scattered members in planning

  Please let me now the reason of not posting attributes with the intention of Members why we need to assign single members of rare dense?

  Have a read of why attribute attached to the sparse dimension dimension

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Why are some of my low quality/pixelated and high quality desktop icons in other places

  Hi, some of my icons on the desktop from my laptop (for example google chrome) are all grainy and low quality; However, in places like the taskbar and startmenu, they are fine.  My connection icon is also very low quality if it gives advice to the cause.  I have the same exact programs installed on my desktop (on windows 7) and I did not have this problem.  Any ideas as to what is happening?  Here is an image that can make it more clear about what I'm asking:

  Right-click on an empty area of the desktop, choose View > small icons.

  This only happens with icons that were not designed to be scale-able.  They are extended only slightly, causing artifacts as we see.  Microsoft has released the guidelines for the creation of an icon in their 'Style Guide of the user experience' a few years ago, but some software manufacturers understand that the sizes of icons "legacy", including max 32 x 32 I think.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• Why has not assigned the c"" drive.

  my hard drive in vostro200 embarrassment, so I replaced a new 1 TB hard drive. no change in the position that the sata cables are connected.

  put power on and boot cd and when I try to install my xp, I create the partition and the pc will yield 'H' and the all as "I"drive." After installation is finished, I see that there are removable disks as c, d, e, f and the cd rom as "g". thinking that I can make a mistake, so I reinstall again, delete all partitions on my hard drive of 1 TB and created 2 partitions again, but it still gives me the ' H' and 'I' of readers. " Although there is no problem using the pc, but I think it is strange. all this so that when I reformatted my other pc oem like HP where there are also readers of cards etc, it is always assign the "C"drive to the new hard drive. can someone clarify this please, thanks

  You have connected USB drives?  If so, disconnect the (and other storage devices that are connected, including the memory cards).

• Why my system occupies the lower because of windows aero

  In the performance of windows note my more low (4.8) is Windows aero? What is and how it can be improved?

  Hello

  Thanks for posting this question in the Microsoft Community.

  If I understand correctly, you want to know how to improve the system performance ratings.

  Here is an article on the Windows experience index. Go through it and tell us if it helps.

  You can also go through the article and check.

  Hope that the information provided has been helpful and let us know if you need more help. We will be happy to help you.

• Why LR displays of imported low-resolution jpegs?

  Whenever I import JPEGs of Aperture in Lightroom, they are displayed in the form of very low resolution.  Could someone please tell me how to transfer the pictures at their original resolution and save my sanity at the same time?

  Opening probably hid your masters; If you need to locate them. It should then be possible to import metadata, keywords, etc.. Take a look at the link of John for more information:

  http://lightroomsolutions.com/articles/migrating-from-Aperture-to-Lightroom-where-do-i-beg in.

• Why the max volume is lower since the update to IOS 9.2.1?

  I also find that the volume control does not more call volume level indicator.

  How can I get that back again please?

  Try a hard reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

  Good luck!

• Why disappear effects on the lower rectangle if I put a?

  Hello community,

  I have a problem!
  Situation: I create a rectangle, fill it to a create an outer glow.
  Test... the effect works.

  Can I put a menu on it (or other rectangles)

  Test... the effects of the rectangle slot disappeared.

  I have also can´t effect on a menu.

  In the eyes of it s Muse all very well, but not in the browser (tested with: Firefox, IE, Chrome, Safari)

  Using the current Version of CC Muse.

  Thanks for help & read my bad English.

  Max

  This shouldn't be a problem to add effects menu, or rectangle, except if you use a custom code in the container.

  URL of the page or the screen shot would be useful.

  Thank you

  Sanjit