Why 'Read a fixed number of samples' help with the error 200279?

Similar Questions

• [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an auto update that's simple to install, just get this error every time

  [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an automatic update that's simple to install, just get this error at each time HHHHEEEELLLPPPPP! Thank you

  I had the same problem.  But finally found a solution.  If your listing is similar to mine, then keep.  XP Media Center Edition 2005 (sp2).  AMD Athlon 64 x 2 Dual-Core, HP a1630n desktop computer.

  Go to the HP website, search for sp37394-XP sp3 Upgrade utility Microsoft for systems equipped with AMD processors.

  I had the same 0 x 80240036, 0x8024400a error, but realize my problem was really get manually downloaded sp3 and installed without continue loop crashing and not error messages.

• Need help with the error "read-only or another user may have open.

  Hi all

  just a background on what's going on. I do not have adobe acrobat x standard, the most recent version. I get an error everytime I try to edit a document.

  I add pages to PDF which is on my computer, it does not allow me to save the file after the addition of pages without giving me this error "the document would not be saved. The file may be read-only or another user can open. Please save the document under a different name or in a different folder. »

  I have to then save it in a separate file and delete the old and replace it with a new one. I'm having the same problem with the files on my server, and I thought at first it was only the files on my server but it does with files directly on my machine. Very frustrating and I cannot understand why.

  I tried to go in editing-> Preferences-> general-> under Application startup to disable "Enable protection mode", but the option is not there yet.

  Please help someone, I can't understand a solution for this.

  Thank you.

  !!!!!!!!!!!! Thank you!!!

  It drove me crazy!

• Help with the error number: 0x8DDD0002

  I'm the administrator of this computer, but I got the error number: 0x8DDD0002 when you try to get updates. It says I must be logged on as administrator. Any suggestions?

  You receive an "administrators only" error message when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/316524>

• Need help with the error message when you try to transfer a file from one laptop to another.

  I'm trying to transfer a file from one laptop to another using Belkin transfer cable. While trying to install software for my old laptop, I get an error message as follows WET7CABLE ERROR OPEN. LOG FILE. I tried with the support of Belkin and they referred me to Microsoft. Please help me with this question.
  Thank you
  Nelson Santiago

  Hello

  It is a matter of easy transfer Windows.
  Read on this and the solution here:

  http://support.Microsoft.com/kb/980870

  Kind regards

  Joel

• Need help with the error in windows update 80244019 is urgent please

  Please I need help urgent problem error update.

  I have a Dell Inspiron 1564, running Service Pack 1 of Windows 7.   I tried several times to update windows and nothing, just appears this error: Code 80244019, tried to install the Windows update agent and pops up the same error., NetFxRepair tool and nothing, FixDotNet, and nothing.  Did a recovery to the fabric (by default) and nothing.   About 2 years ago, I disabled the update and about 2 months ago I tried to update and I forgot the error. Now I need to reinstall all my programs, in the hope that with a recovery, it will fix the error and thrust my laptop, but now is worse, because the installation of updated doesn´t work, Corel Draw X 4 doesn´t supposed error of .NET Framework, so I tried the fixdotnet and netfx repair tool, but nothing. I need to work and I have can´t I have only a portable empty with an outdated windows. Help, please!

  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  or

  Cannot install updates in Windows...
  http://support.Microsoft.com/kb/2509997

• Need help with the error of connection Internet "Reset local connection adapter".

  Original title: Need help with Internet connection.

  Hi, sometimes when I go to my office (HP 2009 m) I get a message that I am not connected to the internet (although I have no problem with the connection on my IPad).  When I click on solve internet connection Windows Network Diagnostics freezes when it gets to solve problems "the local connection adapter reset."   I have to turn off my computer by unplugging and then it works normally when she returns to the top. (Sorry if my explanation is difficult to decipher, I'm not very tech savvy) This could be the cause and how to fix it?  Thanks in advance.

  Well, I expected more of a response, but I'll wing it from here: your cable goes into a modem.  This modem can be a wireless modem/router, or simply a modem cable to your computer.

  Connection problem you might start by connecting the cable into the modem.  Ensure that it is well defined.  If everything looks good, then it is possible that there is a decline in cable service before he gets to the modem.  For example, the interface side of the House can be affected by a bad connection, for example water intrusion, or poor soil.  So you may want to check into that.  Then, there is always the possibility that your cable provider has lost his momentaily of transmission, and that the modem needs to be reset.  If this happens often, you must contact the cable provider.

  Modem, your computer can be connected by cable, so you will need to check how firmly the connection is.  Then, there is always the possibility that the modem is wrong.

  But if your connection is through a wireless modem/router, your connection may have lost because of a bad signal.  Once more..., the modem/router could go wrong.

  Edit has added:

  Looking back on what you said about the Ipad, I feel that you have a wireless modem/router.  It is possible that your connection to the desktop must be after you have used the Ipad.  For example, you may need to right-click on the monitor icon in the Systray to your desktop and open your network sharing Center.  Even if you can say that you are connected to the Internet, you may not.  Then... just ... simplement cliquer click on 'connect or disconnect', then find your network connection appropriate, right click on that and select disconnect, then immediately right-click the same but select Connect.

  
  

  Will be a new connection to the Internet.

• Need help with the error code 80070424

  I'm not able to update my windows vista. It gives the error code 80070424 and says 'windows can not find updates of nw'. I am not able to change all settings also unsuccessfully. Help, please.

  Hello

  Please, try the following:

  Click Start > run >
  Type the command of follow-up in the Open box.
  "net.exe stop wuauserv" (without quotes)
  Press Ok

  Repeat the same for the following commands:

  Regsvr32.exe c:\windows\system32\wuapi.dll
  Regsvr32.exe c:\windows\system32\wups.dll
  Regsvr32.exe c:\windows\system32\wuaueng.dll
  Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll
  Regsvr32.exe MSXML3.dll
  Regsvr32.exe qmgr.dll
  Regsvr32.exe qmgrprxy.dll
  NET.exe start wuauserv

  Restart the computer and try again.

• Need help with the error Code 80244019 Windows Update

  From: Doug

  I get code 80244019 whenever I try to use Windows Update. I tried to change the DWORD in regedit nothing helps... Norton has recently found and 'resolved' trojan.zlob in 128 files in the registry, 21 cases (10 of which were in system32) and 1 browser cache. Whenever I try to use IE to go to http://windowsupdate.microsoft.com I am redirected to msn.com.

  Any advice or solutions would be welcome.

  From: PA bear [MS MVP]

  Chances are that ZLOB was not completely removed and she was accompanied by infections Vundo and SDBot variant, all protected by a rootkit infection. You are going to need specialized assistance to clean this machine,

  Unexplained computer behavior may be caused by deceptive software

  http://support.Microsoft.com/kb/827315

  Run a check of /thorough/ for hijackware, including post your hijackthis on a proper forum log.

  Verification / help with Hijackware

  http://aumha.org/a/parasite.htm

  http://aumha.org/a/quickfix.htm

  http://aumha.NET/viewtopic.php?t=5878

  http://wiki.CastleCops.com/Malware_Removal_and_Prevention:_Introduction

  http://MVPs.org/winhelp2002/unwanted.htm

  http://inetexplorer.MVPs.org/data/prevention.htm

  http://inetexplorer.MVPs.org/tshoot.html

  http://www.MVPs.org/sramesh2k/Malware_Defence.htm

  http://defendingyourmachine2.blogspot.com/

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  When all else fails, HijackThis v2.0.2

  (http://aumha.org/downloads/hijackthis.exe) is the tool to use.

  It will help you to identify and remove any hijackware/spyware with

  assistance of an expert.  * Post your log to

  http://aumha.NET/viewforum.php?f=30,

  http://forums.Spybot.info/forumdisplay.php?f=22,

  http://CastleCops.com/forum67.html, or other appropriate review bodies

  by an expert in the field, not here.* *.

  If the procedures look too complex - and there is no shame in admitting

  isn't your cup of tea - take the local machine, good reputation and

  independent computer repair shop (i.e., not BigBoxStoreUSA).

  --

  ~ Robear Dyer (PA Bear)

  Another response of the community of Windows Vista discussion groups

• Need help with the error message to a web gallery from Lightroom download

  Halfway through the process, I get an error message that says: "an error occurred sending the file: a response had not reached in time."

  I checked my settings, everything is correct and nothing has changed.  What is the problem and how to fix this?

  Hi PGMike,

  This problem occurs especially when there is something wrong with the FTP settings or the server is defined.

  Could you please make sure that there is no prefix "\" or post set in the path of the server.

  Also what version of Lightroom are you using?

  Kind regards

  Assani

• Need help with the error Code: 1002 please!

  I am trying to update my CC Id & get the error Code: 1002

  Any suggestions before I try to support?

  Thank you!

  Hello

  Please follow the steps below:

  Uninstall CC Desktop App using https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html

  Run the tool cleaning Adobe CC from here: https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  Restart your computer

  Install creative cloud app: https://www.adobe.com/creativecloud/desktop-app.html

  Let us know if it works!

• Need help with the error msg 1120: access of undefined property

  I'm not a coder, so I need help coding. Any help would be greatly appreciated.

  I'm a Flash banner that was given instructions "clickTAG" of Google. The code, they said to put the button is:

  Parameter ClickTAG for ActionScript 3 code:

  import flash.events.MouseEvent;
  import flash.net.URLRequest;
  // ......

  
  () someButton_or_displayObject_to_receive_mouseClick.addEventListener
  MouseEvent.CLICK,
  function(Event: MouseEvent): void {}
  flash.net.navigateToURL (new URLRequest (root.loaderInfo.parameters.clickTAG), '_blank');
  }
  );

  Replace someButton_or_displayObject_to_receive_mouseClick with the actual name of the button that will receive the click.

  Note that it is not necessary to specify the destination URL of the ad anywhere in this code; This is supported through the use of "clickTAG". In addition, according to the structure of your Flash Ad, it may be necessary to add "_root." or "_level0." for "clickTAG" above, resulting in a "_root.clickTAG" or "_level0.clickTAG". It is strongly recommended to download the ad on your account and check the ad behaves normally until she'll live, granted for the necessary changes.

  And this is the code that I put in (btnClickTag is the name of my button):

  import flash.events.MouseEvent;

  import flash.net.URLRequest;

  
  

  
  

  () btnClickTag.addEventListener

  MouseEvent.CLICK,

  function(Event: MouseEvent): void {}

  flash.net.navigateToURL (new URLRequest (root.loaderInfo.parameters.clickTAG), '_blank');

  }

  );

  and this is the error I got:

  Scene1, layer 'actions', image1, 1120: access of undefined property btnClickTag. () btnClickTag.addEventListener

  First of all, make sure that you have assigned this name to the button using the properties panel, and then, don't forget to adjust the code so that it is not spread over several lines... normally it must be on a single line.  Do not nest the function where the listener either, so try the following (not necessary for import declarations)...

  btnClickTag.addEventListener (MouseEvent.CLICK, tagClick);

  function tagClick(event:MouseEvent):void {}

  navigateToURL (new URLRequest (root.loaderInfo.parameters.clickTAG), '_blank');

  }

• Need help with the error "user environment.

  I get the following message to the start and now all my personal files and settings are gone.  Help, please.

  Environment of the user - Windows cannot load the locally stored profile.  Possible causes of this error include insufficient security rights or a damaged local profile.  If the problem persists, contact your network administrator.

  DETAILS - an operation i/o initiated by the registry failed irreparably.  The registry could not read, write or flush, one of the files that contain images of the registry system.  Windows cannot find the local profile and connects you with a temporary profile.

  Changes to this profile will be lost when you log out.

  Thanks for any help.

  Hi primovic,.

  ·         Since when are you facing this problem?

  ·         Did you make any changes before the show?

  Step 1: The following article should help you to solve the problem.

  Error message: "Windows cannot load the locally stored profile".

  Step 2: You can follow this link to copy the data from the damaged to the new profile user profile.

  How to copy data from a corrupted to a new profile in Windows XP user profile

• need help with the error code 150:30

  need help to find out what error code 150:30 is and how to fix it

  See the following topics:

  Error 150:30 - error "Licensing has stopped working". Mac OS:

  http://helpx.Adobe.com/x-productkb/global/error-licensing-stopped-Mac-OS.html

• Need help with the error code Udates Windows 0 x 80070424

  Hi, can someone give me some advice on how to enable Windows Auto Udates back, they seemed to have close the cottages and after trying to use all the options available I knew I am now facing an error code when I try to use the Microsoft Web site myself to get them. He responds just error Code 0 x 80070424. Thanks, any help would be great so if you "ve had this problem before or heard about what's going on could you please send me one. Brad

  See: http://support.microsoft.com/kb/968002

  -steve