Why restrictions on iPhone always reset when turned on and off?

I hoped to keep a configuration saved for the rare times where I let my child use my phone of the restrictions.  Whenever I change the restrictions to make is respectful of the child, when I turn off the restrictions that they reset to default values and I need to activate each restriction again next time, which is very time consuming.  Is it possible to save a setting of restriction?

Parameters of restriction within the settings app is meant to be set only once and then used on an ongoing basis. There is no way to set to save the settings of the restrictions without leave it turned on.

An element that can adapt to your usage scenario is guided access. This can be activate within accessibility and allows the phone to be locked into a single application, with various limitations on the use of the button and the screen.

Tags: iPhone

Similar Questions

  • Why my passwords are always deleted when I delete my cookies even when I leave the clear saved passwords box unchecked?

    Why my passwords are always deleted when I clear my cookies and history even when I leave the clear saved passwords box unchecked?

    It happens whenever I have erase my cookies etc.

    May be your unsaved preferences.

  • I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

    I had some trobele with my computer and had to take it when I got it. The firewall was working fine. I do not know

    If you date something on it so that it remains not.

    I will still have my firewall turned on and off I do not know why but I tried another firewall, and it seems to work ok

    Hey Roscoe,

    If you're still using MSE, I doubt there's this problem.  This made a few changes to the Windows Firewall during installation (if necessary), but certainly nothing that would cause it to turn on and off like that.  It could be malware (malware can cause anything), but frankly more sounds like a file systems or corruption or some type of problem with your Windows Firewall or security setting or your operating system in a more general sense rather than the malicious software.  I will refer you to experts who specialize in this kind of thing, but if they tell you it's a malware problem, then come back here and we will be happy to help you solve it.

    For that matter as described, please post here to get the best advice from specialists in this: http://answers.microsoft.com/en-us/windows/forum/security?tab=all which will be more than happy to help you.  You will probably need to uninstall the other firewall you have installed so they can diagnose the problem properly and without hindrance (not just disable it, but completely uninstall to be sure) - but they can tell you more on this subject.  Don't forget up next to the Windows Version to use the dropmenu to choose your version if you find yourself in the most appropriate forum for your system.

    I hope this helps.

    Good luck!

  • structure of the event to turn on and off a LED

    Good afternoon

    I would like to activate a part of my algorithm according to the value in another part. To make it easier, I symbolize the value by a button and tried a structure of user event to turn on or turn off an LED located in another while loop.

    I can turn on the LED, but unfortunately I can't spend off of the LED thereafter.

    It is possible to change the structure of the event and select the option "change value". However, I would like the fatest way to turn on and off using the structure of the event and the Bay. I mean I would like activate a part of the algorithm only if the button is enabled for not having a continuous audit of the value of the button by the structure of the event.

    Please, if anyone has an idea to turn off the LED (after the switch on), add a comment without hesitation.

    I will be happy to solve this simple problem.

    Thanks in advance for your help.

    Ragards

    You have a race condition.

    When you click stop, it's a race about whether if the event gets not saved and destroyed by the removal of the stem all loop against sending the same user in the lower loop.

    Why it only seems to happen with the case of false must be a quirk of how the code is compiled and the order, it is run.

    If you put a step between your Boolean switch and LED, for me anyway, the error is now generated on the true case of the structure of matter (always false for switch.).

    If you put a constant error in the lower loop and wire while guaranteeing the Unregister event so that you now it does not run until the two while loops are arrested, then I don't see a mistake regardless of the value of the Boolean switch when you click stop.

  • Loading with interruptions, screen turns on and off

    I always put my phone in silent mode and plug it in before going to bed. I noticed it turns the screen several times during loading. I can't that assume this is caused by the brief on the charger, the screen always turns when the phone is connected.

    When the battery is almost full, it often becomes extreme the screen starts to turn on and off quickly. This morning, I took a screenshot of the use of the battery before disconnecting. It shows a decrease in the rate of load to 100%, indicating my phone set on another light show.

    I tried two different Chargers, (one came with the Z3C we speak, the other with my Xperia V) a magnetic cable and mini-usb ordinary and even three Sockets different. Problem persists.

    While I do not notice an impact on the performance of my farm, I'm afraid that it will destroy my battery finally. My phone is only six weeks old. Someone at - he seen this before? Any ideas to fix this?

    Hey guys,.

    I finally thought to it: it turns out that a clock plugged into another outlet in the same room was the cause of the problem.

    I hope that my battery was not too suffer from these sessions of loading bumpy.

  • BlackBerry Smartphones retro lighting keyboard turn on and off by itself

    I got a new Verizon BBTour today, I had no problem to transfer my BlackBerry Storm 9530. I typed my first email tonight and found that the backlight of the keyboard is disabled while I was typing, I was about to get up to turn on the light of the House, then light keyboard turn around himself, then a few seconds later to stop again. He was turning on and off itself.

    Anyone have this problem? or does anyone know if there is a problem or that I need to set up somewhere? I checked the configuration on the screen/keyboard, this is exactly the same as the storm I. Help, please

    Joseph

    The backlight on the keyboard is automatic and the sensitivity does not always fire when you would like to.  But, if you are in low light and keyboard backlight does not instantly, place your hand on the keyboard and he rip off and the light.  If the sensor captures a bit of light, albeit indirect, it turns off the backlight.

    There is not currently of an option to change this behavior and it is battery.  It is not an irregular operation of the device.

  • WiFi starts to turn on and off

    Every 15 minutes, my wireless starts to turn on and off repeatedly at a fast rate. I mean, it turns off and then over time offshore on a second and repeat this until I put the computer to sleep, then wake it back up. It of really annoying and makes the difficult to use computer.

    I have a mid-2012 13 "MBP El Capitan running.

    Here is a tutorial that can help.  http://www.switchingtomac.com/tutorials/OSX/MacBook-Pro-constantly-dropping-wire less-con You can also go to/network/advanced/airport system preferences and delete networks that you no longer use. Or swipe your preferred network in the upper slot. Make sure Remember networks this computer joined, is checked. Or you can remove and re-add your network. Reset router by unplugging for 10 seconds then restart him. Make sure the firmware on the router is up-to-date.

  • Computer not start, screen black, I have to turn on and off several times (I have Vista)

    When I turn on the computer, you hear the sound that is running, but I get a black screen with a white underscore on the upper left. Click on keyboard and nothing happened. I must turn on and off several times and then I get the Windows Vista logo.

    If the 2 methods below do not work, you may have to reinstall Vista:

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work, try to make a Bootable ERD to do a Startup Repair:

    As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

    As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    You can make a tool to restart system, System Restore, etc. with it.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista repair disc.

    You can do a system restart tool, system, etc it restore.

    There is not a disk of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • TE2000 - screen turns on and off quickly

    Hi all

    My TE2000 was wrong flashing. The screen turns on and off quickly, sometimes every second quarter or so, it seems, so bad that I can hardly read the display. It's like someone is pressing the lid-switch very quickly.

    It happens sporadically. Sometimes it won't happen for a few minutes. Other times it flashes just once or twice, and still other times, it becomes unbearable and continues for minutes at a time.

    Someone has an idea of what could be the cause? I looked into the screens of replacement on e - bay and cannot find a lot...

    Hello

    Have you tried to check if this problem also appears on external monitor?
    Not? Try to do that! If it doesn't appear that on the screen TFT internal display then it s not a graphics chip malfunction but display or a failure of inverter FL.

    Looking for a second hand TFT screen?
    It seems that the laptop TE2000 supports a 14.1 "1024 x 768 TFT color screen
    Therefore, you can use each view of each laptop that supports the 14.1 screen size

    Good luck

  • Hi, I need touch screen turn on and off software for my dv6

    Hi, I need touch screen turn on and off software for my dv6

    You can find all the software, drivers, information available for your model by using the link at the top of this page titled 'Support & Drivers'.

  • Incessant turning on and off between machines?

    I use Production Premium 5.5 at work and now I need to work often at home. I understand that my license allows installation on two computers that I am the primary user of and the two computers cannot run the software at a time.

    That I need to turn off Production Premium and everything is modules each afternoon so I can use it at home and then turn on and off every night at home so I can use the next day at work? Or includes the software, via an internet connection, I guess, that the other licensed computer does not use the software at the moment which allows me to use it without the mess of constantly activation / deactivation twice a day?

    You do not have to disable the facility any circumstance other than wanting to install and activate it on another computer.

  • Why the Date is always shown when I move my mouse over the clock in the taskbar? Most of the time, it works very well!

    Why does the Date not always appear when I hover my mouse by the clock in the taskbar on my Tablet? It displays immediately if I click somewhere near where on the clock.

    Often it doesn't appear when I go through the clock. Sometimes, it does. I don't know why he sometimes reacts different.

    And didn't someone jump in and start accusing malware etc. Just read my profile. That is not the issue and I don't want to be around anyone who wants just the head in this direction from the outset or even at all! Sorry on my intolerance but I think there are far too many people on the forums who dive on the issue of malware when someone asked a Question on how to change their settings to stop something that happens. I'm sick of this lazy malware junk.

    This is a bug. All XP do. Clicking the taskbar if it "development works most of the time.

  • Parameters of dual portable computer monitor reset when turned off, moving between States connected / disconnected

    I have a laptop that I put in place two hardware profiles for the specifications below.  One is anchored (work) and the other is in stand-alone mode (home).  I put my deskstop settings monitor extended with the laptop as main display when it is docked and the external monitor to the main when undocked view, switch off and moving between the dock and undocked States, my monitor preferences resume their single monitor with the main display as the LCD screen of the laptop.

    I would like to know if there is a way, either with a batch file, script VBS,... to set these parameters to display by running of the said script.  The video card is an Intel HD Graphics 3000 graphics card.  Sorry, I don't have the info exact chipset.  I have set up 2 separate profiles in the application for the video card utility but only makes the manual setting of my display preferences, it does not automatically value them when moving between States anchored and released.

    Any information is greatly appreciated.

    OS: Windows XP SP3

    Laptop: Lenovo T20s

    Graphics card: Intel HD Graphics 3000

    Monitor the work: Viewsonic VG1932wm-LED

    Home monitor: Acer LCD monitor

    Hello

    Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum Technet and MSDN. You can follow the link to your question:

    For the VBS script: Forum of Visual Studio. (MSDN)

    For batch scripts: Windows 7 User Interface. (TechNet Windows 7 IT Pro Forums)

    Hope the information is useful.

  • Bluetooth, turn on and off again when matching

    I have a new iMac for a few months and now I bought an iPhone 6. When I try to pair my iPhone with my iMac, I see on the iMac that's matching (like on my iPhone), I accept the pairing of both devices, but on my Mac, I see that my iPhone is connected, for about one second and it says that my iPhone is not connected. On my iPhone, it says that my iMac is not connected. When I try again, I have a brief window that give me a code, but I don't know what to do, the keyboard does not appear, so I can't enter the code. What is the problem? Thank you.

    An iPhone will pair not via Bluetooth to a computer (Mac or Windows) with the exception of hotspot and then only if your cell phone plan he supports. See below for more information. https://discussions.Apple.com/docs/doc-7722

    If you try to use the procedure of transfer/continuity or AirDrop, which does not have Bluetooth but devices don't are NOT matched. Bluetooth must be just on and the devices within range of the other. The following may help in problems of transfer/continuity: https://support.apple.com/en-us/HT204678

  • Laptop computer CHARGER is turned on and OFF from time to time.

    Hi guys...

    I use an HP laptop and the Windows 7 operating system. Product name-Compaq 420, product number WT919PA #AB4.

    Today, I found that the light on the wall cell phone charger (orange led) is flashing (on and off) from time to time (once it is turned on and wait a few seconds, it is DISABLED. Then again, it is activated) when I pluged in charger. This continues. It is so to charge and then does not charge. I checked the status of the battery using HP Support Assistant, and it indicates the storage capacity of the battery is low.

    Can someone please help solve this issue? Why laptop computer charger light is on and off occasionally? Please help me guys!

    Thank you!

    Yes, it is OK to remove the battery.

    Remove the battery:

Maybe you are looking for