Why scvhost.exe uses 75% of the physical memory of my laptop?

Similar Questions

• Close Internet Explorer creates two elements of rundll32.exe * 32 on the list of the task manager that trigger the physical memory to 90-100%

  Close Internet Explorer creates two elements of rundll32.exe * 32 on the list of the task manager that trigger the physical memory to 90-100%

  You have IE set to 'delete browsing history leaving? "  Rundll32 (with a command line incorporating something in the sense of a call to a function ClearMyTracksByProcess in inetcpl.cpl) is generated to perform this action.

• AppleMobileDeviceService.exe use a large amount of memory

  Original title: Applemobiledeviceservice.exe

  I am running XP Professional and have installed MSE on the computer as my antivirus software.  I have 2 GB of memory and has recently added SpeedyPC Pro to improve performance. Today my PC was slow and open the Task Manager and saw that applemobiledeviceservice.exe used a large amount of memory.  I think my daughter has added years back, but she no longer uses this computer.  Do I need?  If this is not the case, how can I remove it?

  See you soon

  SpeedyPC... what a scam.

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• How to reduce the physical memory?

  I went from windows 8 back to windows 7 and found that only 2.92 GB of my ram to 8 GB can be used and the rest is physical memory. What should I do to reduce the physical memory? I have a dell XPS 15 (L521X)

  Sounds like you downgraded to Windows 7 32 bit.

  Check if you run that. 32-bit Windows 7 can only recognize this amount:

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

• HP Proliant ML350G6 with windows server 2008 standard 32-bit memory system installled is 22 gb but the physical memory is only show 4095 MB

  We are facing problems of physical memory to the hp Server model: HP Proliant ML350G6 with windows server 2008 standard 32-bit.
  The memory of the system installled is 22 gb but showing physical memory is 4095 MB only.pls give me the solution for this.

  * original title - NOT of the PHYSICAL MEMORY MONTRANT CORRECTLY *.

  According to this the max is 4 GB for this version and 32 GB for 64-bit. You need to install 64-bit

• Just updated - now made containing ALL the physical memory - late - more

  I've just updated to the new version - (automatic update) of Premiere Pro - and base renders, who once flew on my computer this morning, are now draining all of the physical memory system - and a break because he's so more enough memory 16 gb.

  Before the automatic update - everything worked perfect.

  I even split the video into segments 2-3 minutes and it does the same thing.

  Mac OS 10.10.5 - 3.06 GHz Core 2

  That's happened? I'm on a tight schedule and I don't have time for this!

  Thank you

  Do you have any lumetry or color correction applied to clips? Sometimes lumetry is the cause.

• Why lsass.exe consumes resources after the start?

  Lsass.exe turns 15-20% cpu level for 10-15 minutes after the start.  I have a fast, dual-core machine and the latest XP.

  Hello

  "lsass.exe" is the local security authentication server. It checks the validity of the user on your PC or Server logons. Lsass generates the process responsible for authenticating users for the Winlogon service. This is done by using packages of authentication such as the default, Msgina.dll. If authentication successful, Lsass generates the user access token, which is used to launch the initial shell. Other processes that the user initiates then inherit this token. More information

  Note: The lsass.exe file is located in the C:\Windows\System32 folder. In other cases, lsass.exe is a virus, spyware, Trojan or worm!

  If you suspect a viral activity, and then run Microsoft Security Scanner and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  I hope this helps.

• All of the physical memory used, but nothing in the Task Manager

  Hi I have windows 7 64 bit new installation as of yesterday (fully updated) and encounter a performance problem. When I look under task manager 95% of my physical memory (4 GB 3.5 GB) is used, but there is no task that uses memory. I chose to see the task for all users, and again nothing use the 3.5 GB of memory. It is a pretty clean install (auditor of virus and Skype, installed steam just) so no chance of a virus. I check my page file and it is set for the page file windows automatically scabies.

  I tried many things:-all service stop I can (no change)
  manually configure the paging file (no change)
  Reinstalled windows 7 (problem is finally once that all updates have been applied)

  Any help is greatly appreciated.

  Thank you

  I had the same problem and it is solved.

  a month ago my computer was sluggish and his memory was 77% either 93%, even though nothing was running. in the Task Manager for all the different processes added up to about 1.75 GB, so there was about 2 GB memory unexplained (4gig memory). I always ignored the 'show processes from all users"because im the only user on my computer, but decided to finally click i and a new process comes top of the list. Windows Media Player Network Sharing Service, this process itself was using 2 GB of memory. After completing the process, my memory returned to normal. However another thing you need to do is go to the resource monitor in the performance of the Manager section tasks and to suspend all processes of Window Media Player Network Sharing Service which are still open to slow things, and then set your very pretty.

  I realize that this is maybe not the exact answer to problem for everyone, but give it a shot.

• Why my PC cannot use all of the available memory?

  Hello

  I have windows ultimate 64 bit and the 6 GB of ram (laptop)

  http://img03.arabsh.com/uploads/image/2012/09/19/0d36454a60fa0d.PNG

  As shown in the photo, there is a free memory and available memory

  Total: 6058
  caching: 2713
  available: 2552
  free: 1

  Why windows cannot use the available memory, although there is no such thing as free storage space!

  What you see is normal.

  Windows 7 do not free memory. He's trying to preload it with applications that she believes, based on experience, that you may need.

  If you have plenty of RAM, you can see more free memory if Windows doesn't find anything to him with preload.

  Available memory is not actively used by all processes memory but it is preloaded with applications, is of the opinion, based on experience, that you might need as I said above. If it is required by another process, it is available to be used and the preloaded data are deleted.

  I hope this helps you.

• Pavilion HPE-110nl lost the physical memory

  Product name: HP Pavilion Elite HPE - 110nl desktop PC

  OS: Windows 7 Home Premium x 64 SP1

  After an electricity break my PC had only 2008 total physical memory MB instead of the normal MB 6104. The memory is there (SIW Gabriel Topala, gives information, 3 Slots with 2048 MB memory-property), but is not displayed in the system - physical memory summary. Already before this summer, this problem existed without clear reason. He disappeared until the day when, after a sudden power outage cost in our village. Control procedure of memory Windows was OK, and also the recovery of the system did not have any results.

  Note that after the blackout, there was an announcement, which I took the default choice of the two options to continue with the PC to connect. I don't remember what was said in the announcement.

  You are welcome

• Using issue view file when you use mp3s on the internal memory and the memory microSD external

  (1) if I have folders of mp3 on the player's internal memory and on the external drive microSD memory, can I use the folder to view all folders on the 2 memorys simultaneously integrated on one list or do I have to go through the files on each memory separately.

  (1) if the answer to question 1 is Yes, then I would like to now if I can have on the internal memory and external memory records with the same name, but with different files and the player will display these folders with both files on the internal memory and the external.

  I want to know because I like to browse through the files, and if the internal memory is full, I wish I could add more files in the folders where the internal memory by making a folder with the same name on the micro sd, and I don't like to go through the files on 2 devices at the same time, just on 1 list.

  Help, please.

  Thanks in advance

  The Clip + Treaty internal and external cards in 2 separate sources, under the folder view (it is quite logical, when you think of him, and just as 2 separate cards on your computer).  And if you look at the 2 lists separately (again, just like on your computer).  When you view your files using ID3 tags, both internal and external map content is merged in 1.

  If you do not have to see 2 separate lists, you can simply keep most / all of your content on the map either internal or external (even by, if you were really dead set on it, for example get a 2 GB Clip + and then using 8 or 16 GB external with her new card).

• Debug vs out - why should I use one over the other

  Hi all

  I have always understood that in the preparation for the final release software and delivery that this should be done using the Release configuration. It's the way that other companies offer their software, so it just makes intuitive sense to me. However, I recently came across a project developed and published all of their modules in software using the build configuration Debug, and reasoning that gave me was that it makes debugging easier when troubleshooting problems after release. Now we intend to use this software for a new project, and I don't know that I am ready to support this reasoning. Beyond reason "because I said!", there are several reasons why I think this isn't a good idea:

  1. it is slower to run debugging code. but for what we use for (drivers and utilities for the most part) it is negligible.

  2. There is a potential for malfunctions due to debug code that results in errors or be out of date.

  3. There could be differences between the debug and release configurations (no not the least of which is the use of the _CVI_DEBUG_ macro to include the additional debugging code).

  4 if I remember correctly, to debug properly, the source code must also be available; and for me, this is a big fat no-no giant for a production environment.

  So, beyond reasons I quoted above, and assuming that they are all valid, can anyone provide additional reasons for or against this practice? Any comments would be extremely helpful! Thank you!

  -Jack

  Hello Jack,.

  It is indeed surprising that the company has decided to ship built in the debug configuration.

  Here are some more reasons other debug versions offering isn't a good practice:

  1. The Debug versions are slower due to lack of optimizations.
     1. The compiler tends to optimize the code in release builds, to make it more faster and perform better on specific platforms (it can also slightly obfuscate the code).
     2. The useless instructions or data are deleted in release builds.
  2. Less memory is used by the source code when running in release builds.
  3. The Debug versions may contain debug information stored in the executable/binary file itself. This debugging information is stores the data on the source code, the names of variables and others. This allows not only the code to run more slowly, but it also exposes internal information (this can probably still provide proprietary information to your users).
  4. Debug builds usually initialize variables and data with 0. This means that programmatic errors are usually hidden by the present.
  5. Debug builds are usually (much) bigger than the trade and slower versions.

  There are other alternatives to shipped debugging binary and perform diagnostics on them:

  1. Newspapers: The embedded application can produce newspapers in the special files/folders or the Windows event log. You can also ask your customers to allow facilities to record special in your application, if the problem can be reproduced consistently and provide the log output for you, for further analysis.
  2. Dumps can be analyzed using the same map files for release builds. Crash address usually refers to a location near a function entry point, you can track your mapping files. When you build your binary files in release configuration, the compiler can also generate the map files that you need.

  In addition, as ebalci said, you must make sure that test you your Release version carefully, before shipping.

  Kind regards

  -Johannes

• MsMpEng.exe uses most of the resources

  MsMpEng.exe lights at different times and use most, if not all, resources.  Is it possible to let his thinking when I do not use the computer?  It interferes with the work on the Internet, I need to account for my work.

  Thank you

  Hello

  1. you receive an error message related to MsMpEng.exe? If Yes, what is the full and exact error message?
  2. what makes you think MpEng.exe makes use of most of it resources?
  3 How long have you been faced with this problem?
  4. don't you make changes on the computer before this problem?

  In response to the questions above could help us help you better. Try to check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• Why my TCP use jumps suddenly the network freeze?

  Here is the chronology of events as I see them... I start my browser and in a few minutes, I can visit more sites is. It just sits there trying to connect. I have check the modem and the router - they look ok. At this point, I start the Task Manager and find the use of TCP is the most, the use of the network is at the maximum, and my hard drive is just clicking on suite. I can't determine what software is to eat memory. Any suggestions?

  Hi Houston,

  Try the instructions in the article given below to reset TCP/IP.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Hope the information helps, if you have any additional questions, feel free to post. We will be happy to help you.

• Why labview programmers use 10.1 the default frequency instead of a same 10.0 Hz?

  It was an issue that was raised during the lab class and no one has an answer for.  Any ideas?

  I call it the wagon wheel effect.

  In the old westerns, whenever a wagon with a Ferris wheel to rays rode by the camera, sometimes the wheel would look like it rolls slowly forward, sometimes slowly propagated backwards, sometimes it would look as if it was stopped.

  It is a function of the frame rate of the camera over the period of the cycle of the spokes of the wheel.  If we spoke (or more) offers exactly the right distance between a frame of the movie and the next, it would look like the wheel had not moved at all.  If he moved a little further than the distance from rotation of we talked, it would look like it rolls slowly forward.  If the cart is a little slower, then it would move only less than the distance of a spoke and he would look like the wheel rolls backward.

  Same thing with having a periodic waveform (every bump of the sine wave is a spoke of the wheel) and a number of acquisition of samples and data rate equal to a whole number of this period (essentially the frame rate of the camera.)  Wagon wheel always rolls forward.  The sine wave is still oscillating.  But according to the rate of acquisition compared to the wave sinusoidal frequency gives a different appearance to the appearance of this sine wave on the chart.

  Experiment and give it a 9.9 Hz sinusoid, you will see that it seems to move backward.

  So I think (and this is only a guess) is that whoever designed the express VI gave it a default value of 10.1 Hz to visually simulate on the graph of the sine wave motion.

  It doesn't really matter what they chose by default as it is to you that the programmer LabVIEW to change this default setting (whether in the express VI or the wiring in a value) to something that makes sense for your application.