Why service pack 2 for windows vista did not install, while my system is certified authentic?

Similar Questions

• Why Ms service pack 2 for windows vista will not activate the sd card reader work?

  I tried to read a card to 8 GB using my laptop built in card reader, I found a solution for vista o/s before sp 1 and 2.  Certainly, there is a fix for sp2 computers now?

  Checked on the net and a lot of people may not read their 4 Gb + SD card, especially on laptops.  My implementation, laptop of Acer 9423wsmi, OS Vista, with Texas Instruments PCIxx12 Cardbus Controller.  I just downloaded and installed sp43509 driver from the site Web of Hewlett Packard and Lo, now I can read my 8 GB card!

  I tried to read during the last two years, so your response inspired me to find a solution, even though you did not actually provide a solution yourself.

• Another problem of Installation of Service Pack 1 of Windows Vista - will not install

  Hey guys, a greeting from Belgium in my first post.

  I recently reinstalled my Windows; This is a Home XP and a Vista Edition Home Premium (updated, so I need to install XP first).
  When I got it setup XP, which goes perfectly to SP3, I switched to Vista. All the small updates installed outside for a few "failures" caused by Vista stop updates itself, because they were not absolutely necessary.

  When SP1 popped up, I decided to download both and see other things, but when you try to install through Windows Update I get the error message "this update cannot continue while some services are still in use" or so, I don't remember the exact message or code.

  When I downloaded the SP1 on the Microsoft site, it worked better and smoother then Windows Update but also to is crushed when the progress bar has been a little more than half. Yet once again, I don't know the exact code but I do not know the message: "update cannot continue because of an internal problem.

  That's what I tried:

  -Retry it 40 times
  -Try in safe mode
  -Turn off all the other third part of the programs, including Win Defender
  -Tried the system update tool
  -Keep hope

  That's what I did afterwards:

  -Save all my settings
  -Rebooted and selected the dualboot XP
  -Formatted the separate partition holding the part of the dualboot Vista
  -Reinstalled on the same partition with the recommended settings, no change

  I would like to have an answer soon, people. I would be incredibly grateful if this could be resolved. Future changes may include error codes given.

  Hello Fallycrom,

  Thank you for using the Microsoft Answers forums.  We have the exact error message and the error code to help you. I suggest you check that you don't have any unknown hardware.  Click Start (Orb), then right-click on computer and choose Properties.  Select Device Manager and see if you have devices mark or explanation.  If you do, you will need to install the drivers for this device.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Full service pack 2 for Windows Vista update problem

  I'm bad havivg update to service pack two for Windows Vista Edition full. After I download and install the package it says then return back to the previous windows instalation. This whole process takes seven or eight hours. Then, I get so sort of little box on a black screen with some kind of error message and code. The last time I did this update I have re-installed a clean windows all over vista. So I lose some files. Then, Windows stores some of the files on the instalation of windows prior to an old file of windows. So what should I do to solve this problem? Is there a quick fix to this problem? Anybodys help is appreciated.

  Bye, narrating

  Hello Michael,

  Thanks for your help, but I downloaded the utility Windows install cleanup a few days ago and installed it. Today, after I first started my computer, I got a notification down in the lower right of my screen saying new updates are available. I clicked ok on update for service pack 2 and installed successfully.

  Bye, narrating

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Is there a problem with the slice of Service Pack 2 for Windows Vista?

  I had to reinstall Windows Vista Unlimited twice already.  This is because the installation of Service Pack 2 for Windows Vista.  I had everything, including Internet Explorer 8 is installed during the installation of the Service Pack 2 has crashed my computer, and I had to re - install.

  Hello

  Please read: information about Service Pack 2 for Windows Vista and Windows Server 2008
  Includes installation tips and Microsoft Support.

  Also Please read: "How TO solve IE8 installation problems"
  Includes installation tips and Microsoft Support.

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• where can I get the service pack 1 for windows Vista Home Basic. My media windows palyer will not play DVD with it. I can not get a decoder installed without the service pack. Please help__

  Where can I obtain service pack 1 for windows Vista Home Basic

  Where can I obtain service pack 1 for windows Vista Home Basic

  Hey electric7422

  Click Start then right click on computer

  then left click on properties

  It will tell you if you have a 32-bit version or 64-bit vista

  links below have downloads the standalone vista service Pack 1 for each bit version

  the 32-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  the 64-bit version

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  Walter, the time zone traveller

• I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update?

  I just formatted my laptop and every time I try to intall service pack 1 for windows vista as it gets installed but when I turn the LAPTOP works again it ask me to update? What should I do

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Hi, Mksethompson,

  What is your model of computer?

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/kb/968279

  Dell issue

  http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx

• After you install service pack 2 for windows vista

  After installing service pack 2 for windows vista on my HP laptop, I started having a few problems. First off the computer would not go beyond the Welcome screen because he showed that an update was the installation (step 1 of 3:0 % etc.) and the computer reboots before finish. It kept the case whenever I started upward, even on safe mode. I tried to restore, but it would never be completed and nothing else would work. Now I can't go beyond the microsoft loading screen because it shows a black flat screen with no cursor. I can't enter safe mode. Help, please. Safe mode only shows the start screen but won't start so I can't access the control panel and tried to boot to the last known successful startup but it failed.

  Hello

  Try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663

  WindowsUpdate_80070663

  Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663 if anyone can help me I would appreciate

  Hi Juan CarlosPatlan,.

  Windows Vista has only two service packs. You'll find the troubleshooting steps in the links below useful.

  Reset the Windows Update components

  System analysis tool

  Cannot install updates

  Troubleshooting of Windows Update (same steps for Vista)

  If you are unable to install the updates, provide the following information:

  • The full version of Windows you have installed
  • KB # the update fails
  • The troubleshooting steps you have tried

• Having trouble finding the "Service Pack 3" for Windows Vista.

  How can I get windows service pack 3 for vista? I am trying to connect to Zune for my Nokia Lumia 710 and it says I need "Service Pack 3" to run the program, but I could not locate "Service Pack 3" for Windows Vista. Can someone help me?

  He talks about Service Pack 3 for XP. You have the latest version of the software? You must use the Zune forum anyway. Click on 'Zune' in the banner at the top of this forum page.

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

  SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-24 12:36

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 1241
  Found 4 errors
  CBS MUM lack count: 4

  Unavailable repair files:
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

  Hello Yiratr,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  http://support.Microsoft.com/kb/956702

  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  "URGO".

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• I am installing service pack 2 for windows vista home edition I get the error not found 0 x 80070490

  I try to install service pack 2 for windows home edition vista, I get the error not found 0 x 80070490 msicexec has an option to make extended logging, but spinstall/help shows all options.

  Split of: http://answers.microsoft.com/thread/82972695-1d12-4a07-9d72-0f9928a68dc1

  Hello

  Apologize for the delay in response. Please see the following article to resolve the issue of Service pack 2 installation:

  Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

  Note: Make sure you back up your data before you perform a repair of Windows installation.

  Hope this information helps. Back to us for assistance.