Why should I activate whenever I start my windows firewall?
Why should I activate whenever I start my windows firewall? It is a new problem that I have not had before.
Hello
You can try a system restore to before it started:
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
===================================
Do you have any other firewall active?
How to turn on the firewall enabled or disabled in Vista Windows
http://www.Vistax64.com/tutorials/92697-Windows-Firewall-off.html
Check dependencies and their dependencies here:
http://www.blackviper.com/WinVista/services/Windows_Firewall.htm
For Services
Start - type in the search box-> find Services at top - right click - RUN AS ADMIN
If necessary, set ALL services back to their default values corresponding to your version of Windows.
http://www.blackviper.com/WinVista/servicecfg.htm
---------------------------------------------------------
Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
strange questions.)
Check the default services and dependencies to ensure that they are running.
http://www.blackviper.com/WinVista/services/Security_Center.htm
Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/
How to fix Vista Reporting incorrect information Security Center
http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html
How to disable or enable the Security Center in Vista
http://www.Vistax64.com/tutorials/67737-Security-Center.html
This thread might help as it might be a permissions problem.
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
Why should I sing whenever I open the hot mail
Why should I sing whenever I go to hotmail
Hi leonardpoirier,-What version of the operating system are you using?-What is the browser you are using?-If it is Internet Explorer you are using, what version of IE are you using?This information applies to Windows Internet Explorer 7 and Windows Internet Explorer 8.Follow these steps if you are using these versions of Internet Explorer.
You can use AutoComplete to store passwords and other information that you type into web form fields. When you turn on AutoComplete, Internet Explorer automatically fills in the fields that you type into web forms frequently, such as your name and your address.
Verify that AutoComplete is turned on
Display the content tab in the Internet Options dialog box to confirm that AutoComplete is turned on. To do this, follow these steps:
a. start Internet Explorer.
b. on the Tools menu, click Internet Options.
c. click on the content tab.
d. under personal information, click AutoComplete.
e. in the AutoComplete settings dialog box, select the user names and passwords on forms check box (if it is not already selected), select the check box prompt me to save passwords (if it is not already started) and then click OK.
f. click OK again to close the Internet Options dialog box.
Restart Internet Explorer and then determine if you connect to Hotmail account without enter the credentials again.
-
whenever I start my windows, the dialog box appears with the words "persistence module a work stoppage" how to fix this problem? someone help me please tell how to fix
Hello
1. have there been recent changes to the computer before the show?
I suggest you to try the steps below and check if it helps.
Method 1: Start your system in safe mode and check if the same problem occurs.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Hope this information is useful.
-
wczdlg.dll and netshell.dll missing and cannot start my Windows Firewall
Hi allI hope that someone will be so good to help my with this situation I tried (and failed) solve this past week or so.I lost my firewall, l, and network connections. As advised I checked the status of the automatic Wireless Configuration. The State was "arrested" and was not a solution for this. I continue typing applications for a solution ot wczdlg.dll and netshell.dll missing. Now I can sign BT.openzone - it's the only way I can use the web.
Also I can't start my Windows Firewall. I have no idea why my system is so badly damaged - the only situation I had was that my charger no longer works and my laptop crashed. I also brought my laptop (HP compaq nc4200-Xp) to my daughter.I don't have a recovery disc and the disc I have with drivers does not download. I would be grateful for any resolution of this problem. I'm only a moderate ad user have no knowledge regarding the actual system so need advice step by step.Thank you very muchJackyHi Jacky,
Thank you for your response.
I suggest you follow the steps in the link below.
Could not start the Windows Firewall service in Windows XP SP2:
http://support.Microsoft.com/kb/920074
Note: This also applies to Windows XP Service Pack 3.
To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
I am facing a problem regarding the ICS Service & could not start windows in windows Xp service pack 2 firewall, whenever I have install windows Xp Sp2 and join the network, the ics services ceased and the windows firewall. While windows firewall service starts when I restart my computer. But after some time stopped again had services that I'm cold does not access the readers of part, could not access network resources.this problem occurs only on windows xp sp2, when I install windows 7, then all better.i work fetch on different forums, apply the settings but I'm not able to solve the problem on base all the time. Someone tell me the permanent solution of this problem, on a forum, I see this solution,sharedaccess.reg and settings.but I am still unable to find a permanent solution.
Someone tell me the permanent solution of this problem?
Hello
Here are a few troubleshooting steps that you can try to solve this problem. See the following links.
You cannot start the Windows Firewall service in Windows XP SP2
http://support.Microsoft.com/kb/920074
Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:
http://support.Microsoft.com/kb/322756
Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users
http://support.Microsoft.com/kb/875357
If you have additional problems, please reply to this post and we will be happy to help you further.
-
I get an error of 0x8007042c when I try to start the Windows Firewall.
Original title: Windows Firewall error
I'm having a problem with my Windows Firewall, I just noticed it is turned off and when I try it activate or disable all it shows me it's to use the recommended settings so I try this but it says firewall Windows cannot change some of your settings so 0x8007042c error code so I try to start it myself by going to type of starting services is already automatic, so I try to click on start , but it says that Windows does not start the Windows Firewall on Local computer service
Error 1068: The dependency service or group could start. Any ideas?Error 1068: The dependency service or group could start. Any ideas?
Find out what that dependencies and check them (all)?
-
original title: error 5 access denied firewall
Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »
Hi vipin sharmavg,.
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
See the below Microsoft article and try the steps mentioned, check if it helps.
You cannot start the Windows Firewall service in Windows XP SP2
-
On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?
Hi jdmanel,
NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756
Follow the steps in the article.
You cannot start the Windows Firewall service in Windows XP SP2
Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users
For reference:
How to manually open ports in Internet Connection Firewall in Windows XP
-
How can I solve unless I need to have this problem to download protection software.
Hi Octavia10,-What version of service pack of Windows XP you are using?Try the methods listed in the given article to resolve this problem:Note: The steps are applicable to the other version of Windows XP as well. -
I cannot start the Windows Firewall, I get an error 0x6D9 code
Original title: error 0x6D9 Code
I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.
Thank you.
Original title: error 0x6D9 Code
I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.
Thank you.
1 know if your AV (anti-virus) program is supposed to disable your Windows Firewall. Some do it.
2. you do not do so in respect of the services? You do it in this way? ...............
Start > Search box, type ser > press the Enter key > scroll down to Windows Firewall...
under status, it lies and must say... Has begun
under Type of status, it must be said... Automatic
If it does not say that, right click on Windows Firewall > properties...
in Startup Type, click on the pointer, and then select Auto
to the service status, click Start
Click OK when finished.
-
Could not start the Windows Firewall
De : Johan
Hello
My firewall gives me this error message when I try to put it on.
"Windows cannot start the Windows Firewall service.
I just installed SP1, but the problem started before that.
De : GTS
Try running this command at a netsh winsock reset command prompt
Restart, and then try to turn on the firewall. Recently, it has worked for me during the interview of a machine of customers with the same problem.
Another response of the community of Windows Vista discussion groups
-
I get an error code 5 when I try to start the Windows Firewall.
Original title: Windows 7 firewall
I can't start Windows Firewall, I am on Windows 7. I have read and followed all kinds on this Forum lately. Nothing seems to work. Own for malware, spyware and viruses.
This is driving me NUTZ, my mistake in Services tries to start the firewall, "Windows cannot start the windows firewall on the Local computer, for more information, review system event log, if it is a Service of Microsoft no, the Service provider contract. And refer to the 5 service-specific error code.
What Else can I do? All I want to be able to do is share my printer between my two PC again. Help!
I solved this problem. I now have a new One.
-
Error of 0x8007042c, cannot start the Windows Firewall
Original title: error 0x8007042c, you cannot start the Windows Firewall
Help
I can't have the windows firewall to install and run...
I have a picture of a mistake, but I don't know how to post the photo of the error here.
Firewall Windows cannot change some of your settings
Error code; 0x8007042CConcerning
Bill
E-mail address is removed from the privacy *.
Old man again on XP PRO
Hi Dan,.
You might have a corrupted user profile, I'd like you to create a new user account and test the question.
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Member of the community of Windows 'rap2pac' has provided a working solution for many of his colleagues in the Windows community. who has managed to "Start" the service of WIndows Firewall except for 'my computer '! * * * *
My laptop FAS recently survived an attack of one of these "ransom of FBI virus". It took the comprehensive analyses of the, "AVG Free 2013"and "Security Essentials" of Microsoft to find and remove all four of the Trojans, who were in fact the active components of the "FBI virus".
There was also the necessary research in the 'register', "Temporary files" and the "user files" to locate and delete all newly modified and/or suspicious looking for folders, files, permissions or registry keys.
Unfortunately, after all signs of the virus seemed to be gone, I discovered that Windows Defender and Windows Firewall were the two people with reduced mobility. Windows Firewall wouldn't start and that's what brought me here... to find a solution.
I read on and is quickly realized that I was not alone. There are many other victims without Windows Firewall. I came across the answer of "rap2pac", which contained a solution that received "rave." I followed his instructions and applied to my laptop. When I clicked on "Start", to start the Windows Firewall service, a window has popped up with this alert message:
" ! Windows cannot start the Windows Firewall service on the Local computer.
ERROR 1079: the account specified for this service is different from the account specified for other services running in the same process. »
I don't understand what that means. I am at a loss and my fuistrations have overexceded their limited storage space... "me!" ... ;)
Please respond with any suggestions that you might have to help in the resolution of this problem.
Thank you for your attention.
Best regards, blsev
HelloFollow these instructions to fix the Windows Firewall:Download and install Windows Repair:When the repair of Windows opens, click start repair , click Start. Uncheck all boxes except for the following:-Reset the registry permissions-Reset the permissions of files-WMI repair-Repair Windows FirewallThen click Start. Once it is finished, restart your computer. Let me know if this helps you.Brian -
Why integration system appears whenever I start Thunderbird... version 50b 11
This box appears whenever I start Thunderbird. Don't know how he got into market or how to turn it off. Thunderbird works fine except that!
If you use beta software. He often done strange things, as it is still in development. I suggest you only install the current version.
Maybe you are looking for
-
I don't want to delete off my ipod 6th generation, I want to just remove and store.
There is not a lot of space on my ipod touch 6th generation and I just want to know if I could somehow, not erase all my music and movies but store them somewhere on my ipod.
-
Tecra A8: can what memory I use?
Hi allI bought a Tecra A8 with 1 GB of memory and I want to upgrade to 4 GB, but I do not know what type of memory to ask.My machine is labeled MODEL No.. PTA83E-08T04E... but when I go to providers, web sites, I have to choose between the models A8-
-
Need AC adapter / Satellite L300 - 145 PSLB0E CC
I need power adapter,I m, leaving Portugal.I don't see where I can buy.Thosiba do not have a webshop in portugal to buy the adapter?
-
HP Mini 110-3529TU: driver WLAN install HP Mini 110-3529TU
Hello all, basically I have the same problem like this thread here: http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/WLAN-driver-won-t-install-HP-14-d003tx... Installed my laptop a new Windows 7 Ultimate 64 bit, I searched the internet f
-
How to erase everything but my movies and music from hard drvie?
Original title: clear memory Now, I want to erase everything on my drive but my movies and music. everything except windows and and my internet. I have no memory and I don't want to buy a new drive? Can someone help me?