Why so slow and fat out put for only the clip size small 1 sec?

Similar Questions

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

  Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

  Hi TG24.

  Acrobat Reader 16.09.21 is now available in the App Store.

  It should solve the performance problem that you are experiencing.

  We apologize for the inconvenience.

• I downloaded a Coded for Movie Maker and tried to play a YouTube clip to edit and it shows nothing happening just the clip. If anyone can help I would really appreciate it

  I downloaded a Coded for Movie Maker and tried to play a YouTube clip to edit and it shows nothing happening just the clip. If anyone can help I would really appreciate it

  Hello

  I suggest you follow the link to import files into Windows Movie Maker below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-files-into-Windows-Movie-Maker-frequently-asked-questions

  I also suggest you check the Web site software codec for further assistance, or try another program to convert the files.

• Hello how do I recharge recharge my acount. I've been in other countries and can't put money on the card (((plz help!

  I need help! How to recharge recharge my account. I've been in other countries and can't put money on the card (((plz help!

  Hi Dimitri.

  Please contact support by calling/chat in order to get the billing issues corrected.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• In the use of space Audit why are my fonts such a large percentage of the total size of the file?

  In the use of space Audit why are my fonts such a large percentage of the total size of the file?

  4 MB of an interactive file 6 MB (71% of the total file size).

  I'm only using Verdana.

  In this case the problem is not one of the fields have the police other than Helvetica. All fields are buttons, and all use the Verdana font in their appearances (icons), as opposed to their labels (aka Legend). This is how InDesign works when it generates the appearance for the buttons. As a result, that Verdana is incorporated several times as a subset, more than 300 times, once by button. This includes a lot of overhead, so that you get the size of large file.

  It would be much smaller than that you need to add buttons in Acrobat, even if you've used Verdana. In this case, the entire police would get embedded, but only once. It would take more work, but the process can be automated, if you need to do this sort of thing a lot.

• I try Ben numbers several pdfs at the same time.  Once I did this, I'll and look and from the second page, the Ben numbers appear at the top and bottom.  I want only the bates numbers to appear at the bottom.  How can this be a gift

  I try Ben numbers several PDFs at the same time.  Once I have a result, from the second page, the Ben numbers appear at the top and bottom.  I want only the bates numbers to appear at the bottom.  How is that possible?

  Hey Bethany,.

  Please try again to implement numbering following the steps in article Acrobat bates help | Add headers and footers Bates numbering in PDF format

  Make sure that you apply for Bates numbering in the foot of page, as shown in the screenshot below.

  

  Kind regards

  Nicos

• Why is my computer so slow and facebook always changes for different languages?

  (1) it takes time to connect!

  (2) there must be coz virus that the letters will not appear on the computer!

  (3) I changed my ID password my Facebook recently due to some unauthorized display!

  (4) Finally, my security work? My hotmail has no letter S at the end of http:!

  Hello

  1. do you receive any error messages?

  2. which version of the Windows operating system is installed on the computer?

  3 did you last modified the software on the computer?

  Method 1:

  If you are using Windows 7, I suggest you go through the steps mentioned in the link and the Coachman.

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Method 2:

  Microsoft security scanner:

  I also suggest you to perform an analysis of your computer online by visiting the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  Please give us more details so that we are able to help you.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  For issues with Facebook, you can post your query to:

  http://www.Facebook.com/help/?page=220217228006012

  For problems with hotmail, you can post your question to:

  http://answers.Microsoft.com/en-us/windowslive

• BC Slow and Timed Out time Admin & website

  Is anyone else know extremely slow and/or meeting expired sessions while admin and on their website?

  In my view, it has been resolved an issued login has expired, but I always attack who suffer and CYBER MONDAY of every day!

  Ideas,

  Thank you - Anne

  Nope seems all good now. Thank you very much!

  Anne Gerber

  [email protected]

  210-382-9051.

• Our computer is running slow and sounds like it runs all the time, then gives error reading disk

  Our computer is running slowly.  Looks like it is running all the time.  It will turn off by itself and I say disc read error.  You need to restart all the time.  A lot of the time, he does not let us start windows.

  Original title: slow slow slow

  Robert,

  Try to run the "chkdsk" how to perform disk error checking in windows 7 http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors

  UTC/GMT is 02:19 on Saturday, November 10, 2012

• Adobe first Pro CC 2015 Audio and video out-of-sync after the upgrade of the 2014 cc

  Hello everyone

  Once the upgrade to first Pro CC 2015 I get all of my video projects that are locked with a yellow box (Adobe Player) that says "Audio and video out-of-sync clock to xx:xx:xx.xxx ', and all my footage has the same problem

  No reason? HE WORKED IN CC 2014 PEARLS!

  any help is very appreciated.

  OK, since I'm short on time and my boss's eye laser pierces my skull, I had to ROLL BACK TO CC 2014.2 G * T!

  Fortunately, there is a way MORE HERE: how access, restore or update any Version of Adobe CC apps | ProDesignTools

  don't forget to install the updates after: all updates of Adobe CC 2014: Direct Download links for Windows | ProDesignTools

  Lesson of the day: If you have a big project on creation, and you are tempted to update CC 2015 for THE MOTHER OF GOD NOT WHERE, AND GET THAT HAND OF THE MOUSE NOW! It will mess up your project and throw the errors that you never had in CC 2014.2

  Good luck!

• Why songs aren't grayed out after payment of the subscription?

  last week, I was able to perfectly good music all songs were available, now today after membership renewal, a lot of songs I had played only yesterday are now grayed out, and all I get is a message of THIS SONG is CAN NOT BE PLAYED. What is going on?

  Probably a temporary problem with Apple's music servers. You can try the force the application to quit music on your iPhone (double clicking the HOME button and sliding upward on music app), then by restarting it and see if that clears up the issue.

  Are you sure that the members (I assume you're talking about the free trial to a paid subscription) crossed and that it is enabled?

• How to hide welcome to and disconnection for only the specified pages link

  Hello

  I have a few pages in my application like forget password page, in which I won't show the disconnection on upper link and welcome message. For the rest of the other pages its ok. If I change the body of model to do then all pages the user welcome disappears, where I need to hide it for a specific page only.

  Please give an idea.

  Thank you

  Chandra Bhanu

  Access shared models/components.

  Find the page template you are using and click on copy.

  Go to the copy and search & USER. and #NAVIGATION_BAR # and delete.

  Go to each page that don't no need of user and navigation and assign the new model.

  This will get rid of the user details and the navigation bar.

  Gus

• Y at - it a keyboard shortcut for play the clips selected in the timeline panel?

  I split an audio clip in several short sections on its trajectory in the timeline panel. I can choose one of these clips divided by clicking on it, but is it then a shortcut to read only the part of the script corresponding to the selection?

  I know there are shortcuts to 'play out' and 'play' the cursor, but it would be great to be able to "play selection" as you can in audio DAWs.

  Thanks for any help.

  One way:

  Select the item, type ' / ' to mark the clip in and out, then Option + K to play outside.

  MtD

• Do not put files to the exact size

  Hello

  I created Illustrator files to the exact size of InDesign pages I want to place on, so they're just right of pop. But they don't come out the same size. I do the command d for the place and then dragging the cursor with SHIFT pressed from the top left of the page to the bottom right of the page, but it never comes out not evenly.

  No idea what is happening?

  Thank you!

  It is the movement which makes the incorrect size.

  Move your cursor to the upper left corner of the InDesign file, and then click. The file will be placed at 100%.