Why sometimes remains a subdirectory 'hiding' after the judgment?

Sometimes, after I stop a guestOS Ubuntu in a WinXP hostOS then it remains a subdirectory 'hiding' (and more things inside).

Why is it not deleted completely as usual?

I say VmWare WS 7.1 with an option to clean up really everything?

Matt

Hello.

Check out this discussion.

Good luck!

Tags: VMware

Similar Questions

  • Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?

    Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?

    Just what do slow down? Rotation beach balls?

    Run and view the results here so that we know more about your configuration.

    http://etrecheck.com/

    EtreCheck

    https://discussions.Apple.com/docs/doc-6172

  • Counter: Why is 'Task is' returns True after the time of the HIGH?

    Realized that my other thread has been put out on the rails by... myself.

    Started testing the "task performed is" function on a counterexample over;

    Why is it returns "True" after time and not up AND down?

    And more still-so, how can I get him back 'True' after the time of low AND high? How can I get it to tell me that it's "done" after 9.1seconds instead of the ~ 3 seconds like today. Is there a better setup that I can use? (the numbers are arbitrary)

    A couple of notes, assuming that we have to deal with default impulses that are active top with a low idle state.

    1. in general, a pulse is defined with a 'time in idle state', first followed by a time in the status of the pulse.  Therefore, by definition a pulse (and so also a task of pulse) is indeed at the end of its active state (high).

    2. HOWEVER, the impulse first in no pulse train DO NOT USE 'small time' entry to set his time in idle state before the pulse.  Instead, it uses the "Initial deadline" entry for the first pulse while 'Low Time' is used for all subsequent impulses.

    3. as a result, when you generate a single pulse, 'Low Time' is meaningless.  Only 'Initial period' is important.  Therefore fitting your low downtime desired within the' original' instead of ' Low Time.

    This type of agreement has always seemed awkward at best to me.  I think that aid should be a lot more important emphasis on the idea that 'Small time' gets ignored for pulse unique.  I mean, the info * is * there but it's pretty easy to miss before you know to look for.  In any case, hope this helps you in your application.

    (An alternative you might consider is to set the pulse with a high idle state.  Then you wire the "Initial delay" to set the first time high and your task would end after 'small time' you set.  Just be aware that when you work with reverse polarity pulses, you should check the output terminal to see what is true by default as well until you begin your task and after remove you it from the State.   A given Council could be biased with meter output in poor condition, so when your task wants to reverse the polarity you might see a rising edge, the task begins in its state of rest high and then a front coming down like the ends of the task and the jury returns to its weak State by default.)

    -Kevin P

  • Why attached used pps files opened after the latest Automatic update of the ie8?

    Attn: Microsoft Brainiacs; IT IS VERY ANNOYING!
    attached pps files won't open if clicked in outlook express/ie8 after automatic update more recent.
    When I try to open files pps attached, this is what I get.
    a box with a red x will appear and this is the message;
    "this file has no program associated with it for performing this action.
    Create an association in the FOLDER OPTIONS Control Panel."
     
    Before the automatic update, this function worked fine.
    Also, the association for pps files is still there in the Folder Options Control Panel.
    and more if I save the pps file attached somewhere / anywhere and then click on it, it opens fine.
    .. This failure to launch opening pps files attached, that happened after the latest Automatic update,
    .. just one more why people hate automatic updates or updates of any kind.
    like the previous functions of work suddenly and inexplicapbly no longer work after the update took place!
    So what's the cure for this annoying problem?
    E-mail address is removed from the privacy *.

    I have XP SP2 and PPS PPViewer 7 NOT VISTA
     
    That's what my watch key

    HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
     
    not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
     
    I also tried renaming it as shown below, and it will not let me NOW WHAT?
     
    where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
     
    Hi wwollmuth,

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files PPS (Microsoft PowerPoint slide show)

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    • After having changed from Show to Open, close the Registry Editor window.

    For. PPT (Microsoft PowerPoint Presentation) files

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files PPS (Microsoft PowerPoint slide show)

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    • After having changed from Show to Open, close the Registry Editor window.

    For. PPT (Microsoft PowerPoint Presentation) files

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    Hi wwollmuth,

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files PPS (Microsoft PowerPoint slide show)

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    • After having changed from Show to Open, close the Registry Editor window.

    For. PPT (Microsoft PowerPoint Presentation) files

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Why my adobe does not work after the switch to windows 7 Windows 10

    Why can't I get my adobe to work after the transition to Windows 7 from windows 10?

    Try to run the tool to clean up here - Download Adobe Reader and Acrobat tool - Adobe Labs

    After that, restart the computer.

    Here again, trying to install Acrobat reader X

    Let us know the results.

    Thank you!

  • Why attached used pps files opened after the latest Automatic update of the ie8? I have XP SP2 and 7 PPViewer

    I have XP SP2 and PPS PPViewer 7 NOT VISTA
     
    That's what my watch key

    HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
     
    not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
     
    also I tried to rename it as shown below, and it won't let me NOW WHAT?
     
    where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
     
    Hi wwollmuth,

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files (Microsoft's PowerPoint slideshow) PPS

    Click Start, type regedit.exe and press ENTER
    Navigate to the following branch:
    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    Click view, and then click Rename
    Type the Word Open before the Show is replaced by the command open
    If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    After the change of show to open, close the Registry Editor window.
    For. PPT (Microsoft PowerPoint's presentation) files

    Click Start, type regedit.exe and press ENTER
    Navigate to the following branch:
    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    Click view, and then click Rename
    Type the Word Open before the Show is replaced by the command open
    If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    After the change of show to open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

    Hi wwollmuth,

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files (Microsoft's PowerPoint slideshow) PPS

    Click Start, type regedit.exe and press ENTER
    Navigate to the following branch:
    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    Click view, and then click Rename
    Type the Word Open before the Show is replaced by the command open
    If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    After the change of show to open, close the Registry Editor window.
    For. PPT (Microsoft PowerPoint's presentation) files

    Click Start, type regedit.exe and press ENTER
    Navigate to the following branch:
    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    Click view, and then click Rename
    Type the Word Open before the Show is replaced by the command open
    If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    After the change of show to open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

    --------------------------------------------------------------------------------
    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    Hello

    This forum is for Windows Vista updated Threads. Please post here:

    http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.windowsupdate&lang=en&CR=us

    Thank you for your visit,

    Rick

  • How to start the database after the judgment

    Hello.
    I had a load havy operation, could not kill, so I run the judgment.
    now I can't open the database, which is massage I get:
    "ORA-16038: 3 log sequence # 52 can be archived.
    ORA-19809: limit exceeded for file recovery
    ORA-00312: threads of 3 1 online journal:
    ' / u01/app/oracle/oradata/ORCL/onlinelog/o1_mf_3_48fpv6q1_.log'
    ORA-00312: threads of 3 1 online journal:
    ' / u01/app/oracle/flash_recovery_area/ORCL/onlinelog/o1_mf_3_48fpv95v_.log'
    "
    What should do?

    You can see what follows, if this can help:

    http://arjudba.blogspot.com/2008/07/database-startup-fails-with-error-ORA.html

  • Why my wifi doesn't connect after the mode 'sleep'?

    When I close the lid on my laptop and open it again my wifi does not connect unless I reboot. I have recently installed windows 8 and that's when the problem ensued. My laptop is a hp envy 15-3247nr with all windows 8 drivers installed and updated including the BIOS. It's okay I'm trying, my wifi option remains grayed out even to disable airplane mode. The f12 key stays orange and does not come on until I restart my laptop in a couple times. Help, please.

    (all drivers are up-to-date and in working order and Yes, the power of the network adapter settings have been changed to not save energy)

    Yes, I tried the utility intel to uptate pilot and he was one of the network drivers and windows 8 but when I tried to install it, an error message would come to saying that I had so he couldn't install the supported operating system.

    And Yes, I went into the bios and set all my settings to the default values and after that point it began to work.

    what I specifically made back my driver of network to an earlier version, and then I went into my bios and changed my setting of network adapter the opposite of what they were (activated or deactivated the opposite), restarted my computer (does not solve my computer), so then I went back into the bios and reset all settings to the default values, and after this point is at the beginning of my wifi to connect without having to restart my computer and so far so good.

  • Why is taking hours to load after the last iTunes update?

    I have Windows 7. I don't know even how long it actually takes to potentially - more than 2-3 hours - open 6-7 hours. I woke up this morning and it was finally opened after I clicked on it last night. This is certainly new behavior with the last update. The document "about iTunes" is quite annoying, because in fact it does not specify which version is installed - this should be at the top of the document, I think. However when I run "Apple Software Update" it says "your software is up-to-date." It is not very useful as a music player more if it takes 3 to 7 hours to open - pretty amazing honestly. In addition, it does not show even any UI again. The Task Manager Windows says that iTunes.exe and iTunesHelper.exe are running and showing 0% CPU, so it doesn't seem to do much. That's happened? This is unacceptable.

    More information: it seems to be stuck in the Windows kernel somewhere as "taskkill /f /im itunes.exe" is not actually kill him - even though it claims too - she is still ongoing in the Task Manager and rekilling he said the same thing:

    Good C:\Users\David > taskkill /f /im itunes.exe

    Success: The process with PID 28976 "iTunes.exe" ended.

    Good C:\Users\David > taskkill /f /im itunes.exe

    Success: The process with PID 28976 "iTunes.exe" ended.

  • Why Logon script runs is not after the installation of service pack 3?

    I installed Service pack 3 on some remote computers connected to the domain.  With Service pack 2 login scripts will work fine, but after I installed service pack 3, that logon scripts do not run on slower links and links a little faster they work intermittently.

    Hello

    I suggest you to send your request in the TechNet forums since the system is in the environment field. Click on the link below.

    http://social.technet.Microsoft.com/forums/en-us/categories/

  • Why my sequence does not disappear after the export of the project?

    After a late night of editing, I made and exported the project (mp4). This morning the customer requested a change, but when I open the project, media source is here. There is no sequence, and I could not find the file. Suggestions?

    (First project in Premiere Pro after several years of use of Premiere Elements).

    the sequence should be there, but I have nothing.

    Well, the only two possibilities are that you just have not yet found, or someone really delete.

    If you remember the name of the sequence, you can search for it at the top of the project Panel.

  • Why did I lose my variables after the release of function? [CS6 - js]

    I try to read my file (if it exists) channel for obtaining the name of print style. I did it in function.

    var mSty = "; Insiders variable

    GIS of the var; var to exist-Yes/non-indicateur

    function findFile (GIS, mSty) {}

    fname = app.activeDocument.filePath + "/" + "prn_style.txt";

    If (!.) {Queue (fname). Exists)}

    GIS = false

    }

    on the other

    {

    GIS = true

    var f = File (fname); ////////////////////////

    f.Open ("r");

    {while(!f.EOF)}

    mSty = f.readln ();

    }

    f.Close ();

    } / / end if exists

    return of GIS;

    MSty return; Here 'mSty' stil exists...

    }

    and here 'mSty' is not already at the exit. Why?

    If (mSty == null) alert ('no file') else alert (mSty);

    So I can't get a file string, cause the variable disappears.

    In short: I need to get two variables of a function.

    Hello

    you do not call the function (at least in the example), means return ;-),...

    Try

    var test = someFunction();

    function someFunction() {}

    var01 = 'odd ';

    var02 = true

    return [var01, var02];

    }

    alert (test [0] + "|")   "+ test [1]);"

  • Why my JPG so loses quality after the export of the PS?

    I use PS3. For some reason a JPEG that is exported from my PS was of very poor quality. See below:

    Here's what the image looks like PS, notice how the color dynamics is

    http://i970.Photobucket.com/albums/ae186/Planet_Invader/random/picture1.PNG

    Here is the JPG image after export, the satuation fell of so much!

    http://i970.Photobucket.com/albums/ae186/Planet_Invader/random/picture1.jpg

    Here's my setting for export

    http://i970.Photobucket.com/albums/ae186/Planet_Invader/random/Picture2.PNG

    The strange thing is, when it is phothographs, it doesn't have this problem.

    Also, can someone tell me what they would do to make the highest effect? I've pretty much has attracted some of these forms wavy and copied them and placed individually, which was very time consuming. If you have a better way please let me know! Thank you!

    Lack of understanding of color management?

    In Photoshop, Photoshop is using the document profile and compensation for your screen.

    Outside of Photoshop, it will depends on what application you use to display the image to know if it will fix your screen or not.

  • Why content remains as last seen by the user?

    I'm going to build a Web site and I SWFs and scroll lists in it. When you consider these and then go back to them, they're still how they viewed last them, for example the swf Gallery is not on the first picture, but on the user the last time. Scrolling data are even left with thumb to scroll down (or there where the user previously left) not to its original state.

    Is - this common with flash or just with flash catalyst?

    Hello Mary,.

    It is common to the kit Flex SDK, Flash Builder and Flash Catalyst. Pages and States remain in the same state that you left them.

    Flash Professional, I think it largely depends on how to create the swf and the list, even if I am less familiar with this product.

    For the SWF in the catalyst, you can use 'stop' or 'gotoAndPlay' return to zero.

    -Bear

  • Why Firefox is running very slowly after the last update (refresh doesn't, no problem using Google)?

    Type characters appears seconds later (for example to provide these details). Web sites load slowly.

    Start Firefox in Safe Mode {web link} by holding down the < shift >
    (Mac options)     key and then from Firefox. Is always the problem?

Maybe you are looking for