Why spam is collected in my outlook but not in thunderbird

Outlook displays email in the spam folder, but these e-mail appear not anywhere in thunderbird

POP email is simply a mechanism to download on the local computer of the Inbox.

IMAP is a synchronized email that synchronizes the mail on the server in the folder with a local client.

My guess is you have correctly identified the Thunderbird as a POP account, it was alll Hotmail provided in a year or two previously, so if you had set up the account for a few years then it will almost certainly POP.

You can configure the account once again as IMAP account in Thunderbird and get all your synchronized folders.

In the toolbar > hover your mouse over the entrance to the new Message, until another menu appears > existing e-mail account

Follow the prompts to assistants to add the account again. Post back before you delete your old account, because that can lead to loss of mail if not done correctly, depending on how it is implemented.

Tags: Thunderbird

Similar Questions

  • Why my website slider works in Chrome, but not in Internet Explorer

    Why my website slider works in Chrome, but not in Internet Explorer

    On this page it says IE version 10 uses "animation".

    & then if you look at the examples on this page it shows:

    div {}

    -webkit-animation: myfirst 5 s; / * Chrome, Safari, opera * /.

    Animation: myfirst 5 s;

    }

    So, you will need to do.

    Also, check the CSS3 menu on the left, there "transform 2D" then you should find how to join also CSS3 2D transforms

    I have never used myself these animation properties, but these pages will have the info you need.

  • Why an object displays in the preview, but not when published

    I added a text box with a hyperlink to another page and it shows fine in preview, but not when published - why?

    Thank you, David. I just went ahead and replaced the problem with a menu object. Problem solved.

  • Why did the counter works in MAX, but not of Labview?

    Please help, I've been away from Labview for more than 3 months and I'm pretty rusty...

    Last year, I configured successfully NI9401 to measure the period (in seconds) by counting the rising edges of my sensor signal.  Since then, I bought a new PC and loaded all my software inside, including the Labview VI that has worked successfully on the old computer.

    I can see the digital signal using MAX and test for the NI9401 Panel, then, I know that my son and my TTL signal is OK, but nothing except the below error when I try to run the attached VI, happens...  How can I say this VI to search for the signal on channel 14 and MOD3/CTR0?

    Thank you. I'm sure it's a small adjustment... it worked well a few months ago... do not know what the problem is now.

    Thank you

    Dave

    OK, now.  Solved the problem. The vi is fine, but some fragile son have been identified... worked in MAX but not in vi.  Now that the connections have been tightened, it works for both.  Sorry for the inconvenience.

    Dave

  • Why ask Windows xp password when sleep, but not at startup

    Windows xp 2002 teacher sometimes ask password, that is to say, when he's sleeping. but not at the start. I want to ask him all the time?

    Go to this article:

    "How to turn on automatic logon in Windows XP"
      <>http://support.Microsoft.com/kb/315231 >

    It tells you how to enable this feature.  To disable it, go to the section "Let me difficulty it Myself ' and follow method 2 except insert a check in the box"user must enter a username and password... ". "instead of delete.

    HTH,
    JW

  • the Windows media player 12: reason why the music projected into a playlist but not in the library are saved?

    I recently downloaded music and recorded in my category of music in Windows 7. Normally when I do that it records automatically on Windows Media Player 12. This time, it records to a playlist, but not at the library. I did not any changes to settings with Win Media Player 12. I searched online help regarding my question with no luck. Any information would be helpful. Thank you for your time

    If you already haven't, physically move your songs in the same folder, delete your old library and build a replacement.

    See you soon,.
    Jerry
  • I can connect my Android device on my Outlook account but not with Thunderbird. What do need me for Thunderbird to connect to an Outlook account?

    At the office, I have Microsoft Office Outlook 2007 is installed. My PC connects to an area of the company that runs on Microsoft Windows Server 2008. I use Thunderbird on my laptop to connect to my Outlook account. How can I do this?

    In view of the fact that they appear to be a Windows-using exclusively organization, it is most likely they use MS Exchange.

    Thunderbird uses Internet POP, IMAP and SMTP standards. MS Exchange can use these but the admin has failed them. It is possible that your e-mail client Android has the possibility of using a Microsoft proprietary protocols to work with Exchange.

    If standard protocols are not available, you can use the Davmail modules or Exquilla in Thunderbird so that it can appear to be an Exchange-compatible e-mail client. I use Davmail successfully on my place of work.

    Keep in mind that if they do not POP etc., it is unlikely that they will allow external connections to internal e-mail accounts. The usual ways to allow such connections are VPN or OWA.

  • Why my sound in messenger and Skype but not in media player work or my music?

    I had a recent hard disk crash and had to replace the hd. I used my restore disk and everything seemed to be fine and install without problem but when I try to use media player or my music I have no sound, but I get sound when I video interviews on windows live messenger and Skype.

    Can anyone please explain why and give me a solution that will resolve this situation.

    Hi peterja,

     
    We recommend to visit the following Web site, click on "Run now" and run the tool successfully: http://support.microsoft.com/gp/no_sound

    Once the tool is running, restart the computer and check if the problem persists.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.
  • BlackBerry Smartphones emails appearing in Outlook, but not on Blackberry

    I got a BB curve for about a year, and I have two e-mail accounts separated, put in place in this regard.  A week ago, I stopped getting emails on my BB in my main email account.  However, I always get emails on my BB in my secondary account.  My email always appear on my Outlook account.   I have not changed anything on my PC.  After trying different solutions, I did the following with no luck:

    * Make sure my account Outlook says to keep the emails on the server.

    * Taking the battery of my BB and put it in

    * Canceled the main e-mail account and set it back up.  Twice.

    * A tried to "reconcile" my emails

    Someone at - it any other ideas?   Help!  I miss and need my emails on my BB!

    I think I solved my problem.   After that BB exhausted all attempts to solve my problem, I thought about one thing.  When I was talking to them, the guy asked me how many mails in my Inbox.   I had a lot and he told me it would take 1000 and then after that, she would 'Butcher' upward.

    While I did that a lot in my Outlook Inbox, I had a number in my Deleted Mailbox, and many of them (probably more than 100 of them) were emails with photo attachments.   I ended up delete everything in my Inbox, my deleted box and my inbox sent.  Then for my BB, I took the battery, left on a ten seconds and put back.   Voila!   I'm back in business!  I don't know if the removal is what did the trick, but I just wanted to inform people to try if you are having this same problem.

  • Why my last episode shows an iPhone but not in a computer?

    I downloaded my last episode #4 on Soundcloud, last week. He immediately appeared in my iPhone Podcaster. But when I checked in my computer a few days later he was still not show here. See my photos below. What can happen and how can I solve this problem?

    Post the URL of your iTunes Store page.

  • Why Playstation 3 detect my multimedia server but not to show one of my music files in folders?

    The PS3 automatically detected my Dell, but it seems that when I open my Windows Media Player, there seems to be a folder under "Other libraries" which I can't add or modify files.  This looks like where points the PS3.  It has the same name as my Dell computer, it seems that it connects to my computer.  I can't add files to the library or even open it.

    BASICS:
    1. ensure that my firewall is configured correctly.
    2. make sure that my PS3 and computer are in the same IP range and subnet masks, so they can communicate with each other.  In other words my computer and the PS3, allowing to obtain its information from my DHCP (Firewall, router).
    3. make sure all firewall software, has the necessary changes to allow Windows Media Player to communicate on a UuNP.  If you are using Windows Firewall and enable sharing for WMP, WMP will make the necessary changes to the Windows Firewall.  If you use a different 3rd party firewall, as I do, McAfee, you will probably need to go this software and add the stuff of heroes, such as programs that can communicate on the network, or confidence of intellectual property, etc..
     
    On my PS3:
    1 turn off the connection to the media server on the PS3.
     
    On your PC, Windows Media Player:
    Make sure you HAVE ALL THE NECESSARY PLUGINS AND CODECS FOR WMP TO DISPLAY ALL TYPES OF MEDIA, such as AVI, QUICKTIME, ETC..
    1. install Windows Media Player (except if it is already installed).
    2. in services.msc or "Computer management", change the account that uses Windows Media Player Network Sharing Service.  Changed to "Local System account", but "allow service to interact with desktop" UNCHECKED.  Restart this service.  It was necessary to be able to add folders from my FAT32 external Western Digital HDD.
    3. click on Options
    4. click on library
    5. click on configure sharing, then the checkbox "share my media to:
    6. click on settings
    7. put in something you want to by the media as and leave the default settings.
    8. DO NOT CLICK on the "allow new devices and computers automatically.  Verification marking THIS wil allow to plug everything you know and approve.
    9. click OK to return to the main properties screen.
    10. click the button of "records of the screen.
    11. once it is up, depending on how you have set up the computer, and how many user profiles you have to choose your options.
    12. for me, being all my assets in different places other than my profile in "Documents and Settings", I did an add and ADDED folders I wanted to add to the library.
    13 let WMP build the library and let him finish completely.
    14. click OK on everything, so that you get back to WMP.
    15. check your library.
     
    On your PS3:
    1. activate the connection to the media server on the PS3.
     
    On your PC:
    1. Once you sit down, you have a pop up, if you let WMP running, to allow unknown peripheral access.  You can check your PS3 by verifying the MAC address.  WMP doesn't support the PS3 yet, so it will be considered as an unknown device.
    If it isn't...
    1. click on Options
    2. click on library
    3. click on configure sharing and if things worked properly, you should see an icon "unknown device".
    4. turn highlight the icon and 'allow' and do whatever you feel necessary, such that customize or right click the icon for additional properties.
     
    On your PS3:
    2. go to each choice of media in the XMB (photos, music, video), and under each doing a "search for a media server".
    3. once he found a media server for each choice, you should then be able to see your PC appears with the funky 'ICON of Windows' and the name of the WMP share, that you have created.
     
    Should be able to go from there.

    Visit this link:
    http://boardsus.PlayStation.com/PlayStation/board/message?message.UID=29329912

  • Why a connector would proceed with Eclipse, but not in the export as a jar?

    When I start my connector in Eclipse, I can start it up without incident and Adobe Drive shows that it among my recent connections. I then packed the same project as a jar according to the instructions provided in the developer notes and when I try to start it, first of all, I have to explicitly say "Add Drive" (i.e., he does not remember the credentials of y) and especially when I try to connect I get an error:

    Root folder missing mountpoint (5001 |) Path: null | User: lhurd | Active principles: false)

    Thoughts on what I should do differently?  This puts me in an awkward situation, as I reported on progress and now can't dpeloy my changes!

    Thank you

    Lyman

    Figured it out.  I had added to the GetAssetsHandler code that did not work, but when I tried to connect by starting the program in Eclipse he gave me the possibility to restore a "recent" link that I used.  When I started the connection from scratch even under Eclipse I had the same rmessage erro (and corrected).

    See you soon,.

    Lyman

  • Why flash keep crashing on my laptop but not on my pc?

    Firefox opens and everything works until I have load any fb games or videos, flash crashes.flash is good on my desktop pc. my laptop is brand-new, firefox and flash are up-to-date, I am sure that flash is on. I don't know what to do. frustrated!

    You can check the problems caused by the recent updates of Flash and try these:

    • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
    • disable the safe_mode in Flash 11.3 and later versions
    • turn off hardware acceleration in the Flash plugin
  • Why my incompatible air policies on IPhone but not on laptop and desktop computers and iPads.

    Hello. I hope someone can help me. I'm a newbie to html, so I use Dreamweaver as a Publisher. I was responsible for developing an e-mail merge for a customer. Everything was going well until I noticed inconsistencies on my iPhone and Android phone device. Here is the link. APTAC WEEKLY NEWSLETTER

    If you look at it on an iPhone the fonts of the upper floor are smaller than the stories below him. I would like to make it all appear the same size. I've played around with the HTML without result. Can someone take a look and let me know if they see an obvious correction to this problem?

    If you have the answer, please be very basic to explain what should be the corrected code and where it must go as HTML again I feel a bit confused when I work in it.

    Thanks in advance for any help you can provide. Have a nice day/evening.

    IOS devices tend to zoom text to what they see as a more readable size.

    You can stop it by adding this to your css...

    {body

    -webkit-text-size-adjust: 100%;
    }

  • Why I can't connect to sqlplus but not EM express or SQL Developer with sys account?

    Hello

    I am running in a strange situation. Any help is appreciated!

    I have an Oracle 12 c database shared running on my local computer. I can connect on it through sqlplus very well. Sys and system work. However, I could not connect on EM express or SQL Developer such as sys, only the system account has worked. I get the following errors when you sign on EM and SQL Developer as sys. I checked that the sys password is correct.

    em_express.PNGsqldev.PNG

    > Express EM or SQL Developer

    both use SQL * Net (ONLY) to connect to the database.

    There is a security risk to allow "sys as sysdba" to log on to the network and should be avoided.

    logging as long as SYS via the network using external password file; probably, that does not exist or contains the wrong password

Maybe you are looking for