Why the customer does not receive the 1 d array sent by the server via a TCP connection?

Similar Questions

• Why my iMac does not recognize my scanner 1600 epson perfection since the upgrade to ElCapitan 10.11.4?

  Why my iMac does not recognize my scanner Epson Perfection 1600 since the upgrade to ElCapitan 10.11.4?

  First try this: reset the printing on your Mac - Apple Support System

  If this fails, you can try this driver: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14577 & infoType = Down load

  

• Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value.

  Prob Winmail.

  Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.

  Using a digital signature?  Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.

  Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.

  Steve

• OME does not receive details of the inventory and the State for some devices

  OME does not receive the details of the inventory and the State for some servers.

  For example when looking at one of our PowerEdge R620s is all that presents itself:

  

  iDRAC firmware and LCC is updated (version 2.21.21.21 is installed.)

  I reset the iDRAC, and that did not help.  I have no problem with most of the other R620s in the same range of discovery.

  I deleted the object to OME and re-discovered twice over the past week it but did not help.

  Things seem ok when I use the troubleshooting tool:

  

  Anyone has any info on what may be going on here or how to fix this?

  Thank you

  Hello

  Thanks for the details in the post.

  Wanted to check what version of OME use you - OME 2.1?

  If so, this behavior with ws - man discovery could potentially due to expiry of certificate on this device. You can launch the iDRAC user interface and confirm the certificate information.

  2.1 the OME, the WS - Man communication component is updated. The most recent component does not communicate with the device if that device has been exceeded in the certificate.

  Sslresetcfg running via racadm will reset the certificate. For details and solution, see same threadhttp://en.community.dell.com/techcenter/systems-management/f/4494/t/19653767 .

  Let us know if that helps.

  Thank you
  Vijay

• EX 60 does not receive the CUCM phonebook directory

  Cisco EX60 is registered on the CUCM, but it does not receive the phone book. IP phones receive the directory.

  Cisco Services for user data is active and running.

  CUCM system version: 9.1.1.20000 - 5

  EX60 software version: TC6.3.1.f768649

  You must mention the URL of the directory on your EX60 in order to extract the CUCM directory.

  EX60 login go to Configuration > server directory > URL and mention of the URL in this format:

  https://: 8443/cucm-uds/users

  First, you can test by opening this URL in a browser to verify if it is correct.

• Can we use Office default memory offline if the customer does not have enough free memory?

  Can we use Office default memory offline if the customer does not have enough free memory?

  Yes. We can use the parameter offlineDesktopDefaultMemoryScaleupValue jointly with the offlineDesktopReportedHostMemoryValue parameter in the registry.

  For example, if your client system has 2 GB of memory and the desktop view is configured to require 2 GB of memory, you won't be able to check the desktop view because low memory is also necessary for visualization of hosted customer.

  Use the parameter DesktopReportedHostMemoryValue = 2048 registry offline, so that you can go to the desktop and use the registry parameter offlineDesktopDefaultMemoryScaleupValue = 1024.

  so that the desktop view uses only 1 GB of memory when run locally.

  Reg patch: HKCU\Software\VMware, Inc. \VMware VDM\Client\disableOfflineDesktopMemoryScaleup

  Note: If it's a small environment you can do manual. Or we can simplify this activity by creating a group policy.

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• Why channel Volume does not appear in the Panel of the applied effects (first 12 elements trial version)?

  Hi people

  doew anyone know why Channel Volume does not appear in the Panel of the applied effects (first 12 elements trial version)?

  Thank you very much in advance

  Adam

  adamPREMIERE

  I have the book, but this screenshot has been extremely help.

  The answer is...

  Like I said, the default Panel in the range of effects of applied effects/Applied / Motion and opacity.

  Once you apply fx effects Audio/Effects/Channel Volume effect to your audio clip, you will see the channel Volume Panel in the Palette of effects applied and the movement and opacity.

  I'll give you screenshots if necessary.

  Please try to prove guilt.

  Thank you.

  RTA

• Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.

  Original title: updates

  Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.  Although I tried to reset nothing help.

  Have also tried to download Windows 10 but computer spends all day looking for updates, but nothing happens.

  As its been almost a year that it is updated, you may be better off to backup your data and backup of your entire system, so you can get back to this point at least if something goes wrong. Then:

  Update your anti-virus software and run a full scan. Then download, install, update and run a full scan with Malwarebytesfree. Keep it free, no need to start a trial etc. Malware can be a cause of failure of the updates, the scan won't take long to run and should report something nasty, if its there.

  Then you can try the following:

  1 convenience store update Windows - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter

  2 system update readiness tool - http://windows.microsoft.com/en-us/windows7/what-is-the-system-update-readiness-tool

  3 components of reset update - https://support.microsoft.com/en-us/kb/971058

  4. check that "Windows update service" and "Background Intelligent Transfer Service" are listed and running according to the details in this article - https://support.microsoft.com/en-us/kb/2730071 "

  If the above does not help, consider trying a 'repair installation system' - http://www.sevenforums.com/tutorials/3413-repair-install.html if you have windows installation discs, or a 'factory reset' (updated) If your PC came with no windows disk and was preinstalled. NOTE - in case backup your data and your system first in the form of data may be lost if something goes wrong, and data will be lost in the case of a factory reset.

  If you do not want to reinstall again, post back with more details, that is at least what is the error code when the updates fail? (find an update failed in "view history update", right click and click details.) Check a bit to see if the same error code. ). Then someone else can we hope to help more.

• Why pes 2012 does not work with me and my video card is 1699 MB Intel HD Graphics(core i3)?

  Why pes 2012 does not work with me and my video card is 1699 MB Intel HD Graphics(core i3)?

  Hello

  You receive an error message?
  
  Method 1:
  You can update the drivers of graphics cards and check.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  Method 2:
  You can also perform a clean boot and check if it works:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article

  You can also check out the link:
  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems
  Diagnose problems running DirectX
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

• Ensuring that my dealer does not receive a ton of bounceback notifications

  The last email Eloqua I sent my seller has said that received hundreds of escalation notifications by e-mail. I'm 99% sure that this has happened, because I put the display address ('From') be his email address. Normally, we put the display address ('From') to be our generic Inbox that verifies the customer service.

  I want to just make sure my dealer does not receive hundreds of notifications bounceback on my next emails. I'm sure as long as I do not have his email the display address ('From') on the ground, on the right?

  If you are in E9 as indicated by the category selected for your post? If so, you must go details by e-mail and specify an e-mail address to respond to custom. There is a section called 'Headers of email sur-reponse' and this is where you can check a box to customize the address and make the change. See attached screenshot.

  If you are on the E10, you open the settings box in the menu of the machine and this is where you change e-mail rΘpondre α in E10.

  

• Why this scriipt does not work with Firefox? < embed src = "News2008Fall.pdf" width = '615' height = '3200' > < / embed > "

  Please tell me why this script does not work with Firefox. It works with Safari. Here is the page that includes the script: www.lionsgatehoa.org/newslettertest.html. Thank you. Tom Engleman

  Here's the script in my html document:

  < embed src = "News2008Fall.pdf" width = '615' height = '3200' > < / embed > "

  Edit: removed # phone

  Works for me on Linux.
  
  Your system details list does not display the Adobe Reader plugin, so you'll have to (re) install this program.

  See:

  • https://support.Mozilla.org/KB/using+the+Adobe+Reader+plugin+with+Firefox
  • http://KB.mozillazine.org/Adobe_Reader
  • http://get.Adobe.com/reader/otherversions/

• Why my Skype does not work? "KERNEL32.dll".

  [The update by the moderator topic title should be more descriptive. Original section title was: "why my Skype does not work:------?']"

  It's saying "Fatal error failed to get proc for GetLogicalProcessorInfromation (KERNEL32.dll) address; __ ; someone help me?

  You must update your installation of Windows XP to the latest Service Pack 3 (SP3).

  https://support.Skype.com/en/FAQ/FA12388/why-am-i-getting-a-fatal-error-KERNEL32-dll-when-i-try-to-l...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

• Why my printer does not print with Windows 8?

  Why my printer does not print with Windows 8?

  Did you just upgraded or purchased a new computer with Windows 8, and now you can't get your printer to work?  If so, this can help you.  Many people have questions about the installation of their printer on a new OS.  This will help you answer these questions and make sure you get everything installed.

  Before you start

  Before you try to install the printer on a Windows 8, you should check to make sure that the printer is compatible with the new OS.  The link below will give you a list of printers that will work in Windows 8.

  http://support.HP.com/us-en/document/c03168175

  If you have upgraded your computer to Windows 8 formed another version of Windows, make sure all software uninstall complete of your printer.  It should still print, but to use all the features, you will need to reinstall the software, if available.

  Another thing to consider is how you want to connect the printer to the computer.

  1. USB.  You must ensure that you have a USB cable which does not exceed 6 feet (about 2 m).  Be sure to connect the printer directly to the computer.  Do not use a USB hub.
  
  
  2. Ethernet cable.  Make sure you have the network configuration, you have a free cable port on the router, and you have an available Ethernet cable.
  
  
  3. Wireless.  You must ensure that you have the configuration of the wireless network, and you have the password of the wireless network.

  1. installation Via USB

  Installation via USB in Windows 8 became much simpler for users of HP printer.  In other versions of the Windows operating system, you need to launch the installation and wait that it asks for the USB connection.  If you do not, you will need to uninstall the printer from the devices and printers folder and then launch the installation.  In Windows 8, which won't be a problem.  If you plug the USB cable from the printer and then install the printer software, work remains.  Now for in depth instructions on installing the printer via the USB port click on the link below.

  http://support.HP.com/us-en/document/c03521864

  2 installation Via an Ethernet network connection

  For an Ethernet connected printer, the installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It's really as simple as that.

  http://WWW8.HP.com/us/en/support-drivers.html

  3 installation Via a wireless network connection.

  For a wireless printer, network installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It is roughly the same as just Wireless Ethernet installation.

  http://WWW8.HP.com/us/en/support-drivers.html

  Alternative installation methods

  With Windows 8, the drivers of many printers are installed with the operating system.  These are called pilots InOS, since they come built-in to the operating system.  If you have one of these printers, you should have to do simply connect it to the computer via USB, or connect to the network via Ethernet or wireless.  Once you have that makes Windows will take care of the rest.  There are other methods of installation of your printer if normal methods don't work for some reason any.  You can install the printer is using the printer, or through Windows Updates Setup Wizard.

  Set printer wizard:

  http://support.HP.com/us-en/document/c02681060

  Windows Update:

  http://support.HP.com/us-en/document/c03460648

  Note: The drivers of Laserjet for the Asia-Pacific and the Japan will come only at a later date.  See below the link support site for the availability of the driver.  I will update this post once they become available.

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope that answers some questions.

• Why Apple cards does not work in Saudi Arabia?

  Why Apple cards does not work in Saudi Arabia?

  Hi msmadi,

  I understand you are trying to use cards for Apple in Saudi Arabia, but faced problems. I don't know what questions you are running, but if you want to use a specific feature, it may not be available here. Take a look at the link below to review what features are available with an iOS device using iOS 9.

  iOS 9 feature availability
  http://www.Apple.com/iOS/feature-availability/

  Nice day