Why the division operator give me different results in different screws?

Similar Questions

• Why the system operating to deny access to the file specified to run wipe Drive 5

  Why deny operating system access to the specified file for execution unit 5 Wipe to wipe my hard drive, I need permission.

  Hi JoyceScott,

  ·         What is the operating system installed on the computer?

  If you receive no error message indicating that access is denied, take the permissions on the drive and check if it helps.

  a. right click on the external hard drive, and then select Properties.

  b. click on the Security tab, select the user name and click on modify.

  c. now, click Add and type the user name that you want to grant permissions to sub enter the names of the objects to select, and then click on check names. Click OK.

  d. now, select the user name you typed in group or user names and check full control under the terms of the authorization for.

  e. click on apply and OK. Check whether the problem exists.

  For more information, visit: What are the permissions?

• Why the Windows operating system costs money. ?

  With less beer in my gut. Sorry for the hike.

  Because, who, in their mind starts to work for a mans advantage, not to mention millions for nothings. ?

  I hope you know that this or any operating system should not be free. Get my jest...?

  It's like waiting for Ford to provide the free gas.

  Why do not all work for free,

  An o.s. is supposed to be a charitable contribution to the kind of man?

  Contact Obama.

  Bill Gate is a liberal, but he's not crazy :)

• Why the 'AccountDetails' window give me only backward, finishing, cancel the options when you try to create a Firefox Sync account and does not allow me to set up complete?

  I'm trying to set up Firefox sync. I go to tools > configure sync.
  The box opens.
  I click on "create a new account. I have complete my account information. The only options I give at the bottom of the box are 'Back', 'End', 'Cancel '. There is no button "next". I click on "Finish" and the box disappears. "Even when I try to click on" Synchronization Options "nothing happens.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Why the FFT spectrum gives values of RMS?

  Dear Sir

  I want to get the value of crete to crete on FFT spectrum. But he gives values of RMS. Can you please guide me how can we peak to peak on the FFT spectrum. Attach the vi is for example.

  Kind regards

  Urfee

  Tronoh wrote:

  Dear Sir

  I want to get the value of crete to crete on FFT spectrum. But he gives values of RMS. Can you please guide me how can we peak to peak on the FFT spectrum. Attach the vi is for example.

  Kind regards

  Urfee

  What does it mean to get the value of Ridge Crest of a FFT spectrum?  [I understand getting the value of P - P of the signal ...].  Note that the parameters on the average you attached (which shows mean quadratic value, by the way) refers to the way in which the Spectra will be averagedand RMS is logical (logical) in many cases, but I'm at a loss to understand the average peak-to-peak here...

  BS

• Why the path of motion is different!

  Hi all

  I have a query that is running satisfactorily in TESTING, but takes a lot of time in the PROD.

  SELECT * FROM MTHLY_PROD_BASE WHERE START_DATE > to_date('1/1/2013','mm/dd/yyyy') start_date = AND < to_date (' 1/1/2014 ',' mm/dd/yyyy')

  MTHLY_PROD_BASE is a view that contains some tables and views that make the summons and the underlying data groupings.

  I have a plan to get for her TEST and PROD in jpg format, but I'm not able to reach here as the 'Insert Image' button is inactive for me. How can I reach them to explain my problem correctly?

  There was some memory added around a week to the DB server to improve the performance of another data base there, but since then the DB in which I ran the query is a bad performance.

  Data for the underlying tables referenced in the query, test is the same as in PROD, but the plans are different.

  I need to know what factors can lead the path for one request to change, so that I can investigate what else might have changed/East fell into the PROD?

  Thank you

  Hi all

  I found that the problem was due to the fact that main table is highly fragmented, which made the FULL table scan to take a lot of time and therefore probably caused the change in the path.

  The following query revealed fragmentation:

  Select a.owner,a.table_name,round(b.bytes/1024/1024) CURRENT_SIZE_IN_MB,.

  Round((a.Num_Rows*a.avg_row_len)/1024/1024) ACTUAL_SIZE_IN_MB,.

  Round(((b.bytes/1024/1024-((a.Num_Rows*a.avg_row_len)/1024/1024))/(b.bytes/1024/1024))*(100-a.PCT_FREE),2) FRAG_PERCENT b, dba_tables dba_segments

  where a.owner = b.owner and b.bytes/1024/1024>100 and b.segment_name = a.table_name

  I have rebuilt the table/index using "alter table move" and orders "alter index rebuild online" and things are good now.

  Thank you all for giving helpful suggestions and I'm sorry, I still do a follow-up with the guy who gave me plans to image format, he's too busy new do explain plans and provide me with text :))...

  Thank you very much.

• Why the my triggers timeline are different?

  
  I try to add an element to get timeline trigger. When I click on add a trigger, that's what I see and there is no option to add a to-do item - even if I do a search.

  

  In the tutorial, I'm following on Lynda.com and other documents I've seen searching the Web, it is what it is supposed to look like:

  

  I use Edge animate CC - selected do not know if I need to have something different to get the options indicated above or what. I tried to click on the different selections like video, audio, etc. and I'm not finding what I need.

  Any idea would be appreciated.

  Yes, the Panel shares was changed in the update of 2014 CC: the Actions update panel ' Team Blog animate Adobe edge .

  All actions in the previous Panel always work (some may have paid off), but there are not more excerpts of predefined for each button.  You can reference all those here however: API JavaScript Adobe Edge animate CC.

• Why the new update gives a file jquery - 2.0.3.min.js?

  So I've updated on adobe, and I got in trouble instead of improvements. Whenever I publish my file it give ads a jquery - 2.0.3.min.js which is so heavy that my file is now more than 60 KB.

  My record was 17 KB.

  How can I change the publication settings so that I don't have that 3 javascript files = edge.js, edgeActions.js and a edgePreload.js

  Who are the original javascript files. It is not yet publish a preloader.

  What can I do?

  You don't really use any jQuery script in your publication and it can be removed safely. You can go to the library, section scripts Panel and right-click on the line showing jQuery and choose Remove. I have attached a screenshot for your reference.

  DIA-

• Where is Photoshop CC and why the system I give CS6?

  When I joined the membership of CC (only app), and paid for it, I was offered an only - version and a version of Photoshop CS6 Externded edition. Where is the CC of Photoshop, I paid? If they are the same thing, why is not clear in the buying process? Why can't I just buy an upgrade to the current edition of Photoshop, pay my money and save all this endless, time-consuming mess? I want to just edit a photo. Not happy.

  OK, when I started the Application Manager again just on time, it updated itself for awhile and it now offers me Photoshop CC instead of CS6. Thanks for your help!

• Why the connector pane displays a different connector for lvclass?

  Picture is worth 2000 words...

  What is the special problem with the connectors on the left & right superiors?

  I have other lvclasses, but they do not have the points X shaped...

  

  Those who are marked as dynamic connections distribution (take a look on where you would be required). An entry from JJ means that it is a VI that is designed to be substituted dynamically at run time according to the type of class actually present on the wire.

• Why "the requested operation requires an elevation" error with compressed files?

  8.1 Pro x 64 win (installation clean dec 2014). After years of no problem with the zipped files, since February 3 I get a message titled "altitude" by trying to open the files zipped, be they open them in Windows Explorer or after you download and get the choice open with Internet Download Manager. Here is a screenshot with Windows Explorer: http://i57.tinypic.com/2624mmd.jpg.  OTOH, zipped files open them directly from another Manager files, XYplorer, and I can open them via my default zip file Extractor IZarc. Although I hand't nothing changed, I thought that authorization, as the source of the problem, but the three points in the user names or group for the folder and the files have all the permissions checked except for special permissions. Any idea of what this could be the cause?  Because I have not any change in config, I wonder if a Windows update might be behind it. It is a desktop PC of the single user with one account. Thank you

  Yes I think that should change as well.  You should be able to force it by double-clicking any ZIP file and choose "open with > set as default" and choose the favorite program of this dialog box (which I really hate because it disappears if you click outside, so it's basically dialog too bad if you want to go check something before making your choice).

• Why the debth bit of my different raw file image in my camera, Brigde and the opening in Photoshop?

  I have a full frame Nikon D700 12 megapixel camera that has a depth of 12 to 14 bits. I used to shoot images with the file format raw Nikon (NEF) with the parameter of color space to Adobe RGB (1998). When I select a picture to view the details of the metadata in Adobe Bridge, the number of bits is indicated as 16 and color as RGB. Open the image in Photoshop displays the detail long and narrow line down the near the bottom of the screen. It indicates that the color is 8 bits but still Adobe RGB (1998).

  Can someone explain please these fluctuations? It's always a NEF file, I want to talk to.

  Thank you.

  With Camera Raw open, you must set the color space and depth of Bit to open like in Photoshop. See image:

  

  Edit: In addition, a raw file contains raw data - no color profile embedded. At least is not all programs, with the exception of Nikon, will recognize.

  Benjamin

• Why the port is different with others in Nexus7710?

  Hi you see below. Why the port highlighted number is different with Eth4/23 when you use the command show interface brif? Thank you

  Eth4/22 - eth routed down administratively to auto (D)-
  Eth4/23 - eth routed down administratively to auto (D)-
  Eth4/24/1 - eth routed up to 10G (D) none-
  Eth4/24/2 - eth routed down administratively to auto (D)-
  3/24/Eth4 - eth routed down administratively to auto (D)-
  Eth4/24/4 - eth routed down administratively to auto (D)-
  Eth7/1 - eth routed down administratively to auto (D)-
  Eth7/2 - eth routed down administratively to auto (D)-

  They look like this:

  http://approvedoptics.com/Cisco-QSFP-4x10g-aoc10m/

• Why the menu link and hyperlink all go to the wrong page

  Have a site that has been active for a while and was fine when we downloaded and became operational.  Some time after, with subsequent updates to the site, one of the menu buttons goes to the wrong page, no matter what we do.  I tried "include the page without hyperlink" and then used the hyperlink tool to post a link to the page, same result.  Then I deleted the link hyper, tried "include the page without hyperlink" and inserted the link for the appropriate page hard. Same result.

  Also on an other pages, there is a hyperlink which is supposed to go to this page as we cannot return, and THIS hyperlink goes to the wrong page (the page we want to propose is equipment, and what he's constantly going to is the about page.

  I checked for additional boxes (which does not explain why the text on a completely different page link also goes to the wrong page, but check it anyway) and there is no additional text box or whatever it is.

  I think that this must be a glitch of Muse and do not really enjoy the idea of rebuilding the site.

  Please help us to understand what is happening. Site of phone works fine it's just the version of office that is glitching.

  Click here to view the site online.  No matter what page you are on, if you click on "Facilities", it takes you to "About Us" and if you go to the Contact page and click on the text "Amenities" link which will take you to the page about us.  He's allergic to the equipment page.  As I have said, when the site was first direct links menu everything has worked well.  Actively, we test each page.

  I hope someone can help.

  Hi David,

  Thanks for the reply e-mail after receiving our folder.

  We tried your suggestion (which I thought I had tried before, but didn't so I tried again) with the same result.  Still no way to access our facilities page.  Have you checked the preview site, or did you visit the site?  When see us it in the preview (in Muse) then the page is launched, and the menu is as it should be.  But it does not work after uploading on the real site.  Our site of phone works fine, however...

  We're going to look at the server and see if there's some sort of corruption which runs at this level and will post if we find anything.

  Thank you

  Michelle

  * Amended to add that we found a redirect that should not have been in the htaccess, deleted page it and now it works!  Thanks for the time and help Ankush!

  Michelle

• 10 mb on the guest operating system network connection

  I just installed ESXi 4.0 on a server that has 6 physical Gigabit NIC I only got one of them enabled for now. I created a new virtual machine with a clean install of Windows XP Pro and I was quite surprised to find that when finally completed XP installation, she did know that the speed of 10mbit NETWORK card. Although the physical NETWORK adapter on the server is a Gigabit NIC, its connected to a 10/100 switch and the lisghts on the connection stating that the ESXi NIC host operating at 100 Mbps. Is there a reason why the guest operating system should see a 10mbit connection?

  Concerning

  Eugene Gill

  I agree with the previous post, but it should also check your network connection on your host computer speed (host, configuration tab, click on networking) to see how fast has been negotiated.