Why the Dreamweaver files locked and cannot be changed?

Similar Questions

• while sleeping, the computer is locked and cannot be opened by the administrator

  Help. I have an old computer second, forwarded by a friend that I have more contact with. This computer is used daily by another friend who doesn't have a computer.

  every night the computer go to sleep and the next day when he woke up that my bud Gets a message that it is locked and only the admin can open it.

  I changed it to the administrator, but when the screen opens and he tries to enter the password, the screen seems FROZEN and don't let him enter his password.

  . the only way to work around this problem seems to be to restart. as the machine is old, reboot may take 10 minutes or more. What can be done to avoid this mess?

  Oddly it only happened in the last 2 weeks... for almost a year that wasn't a problem...

  concise simple tips are appreciated.

  Steve

  Hello

  See if that helps you.

  The second part is on XP and standby / sleep of password.

  http://www.mydigitallife.info/disable-Windows-XP-and-Vista-from-asking-for-password-to-unlock-on-wake-up-resume-from-sleepstandby/

  And there is an option of password screensaver in XP, too;

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_assign_screensaver_password.mspx?mfr=true

  Doing this is reverse:

  http://www.computerhope.com/issues/ch000790.htm

  See you soon.

• Why the driver file cannot be "x 86"?

  There is a strange problem for a driver: the driver file cannot be "x 86" under windows XP.

  I have a driver, the driver started the "i386" folder files and I can install the driver successfully.
  can I change the name of folder name to "i386" to "x 86". When I try to install the drver, a message box pop up to tell me "xxxx necessary file", installation failure
  and I can confirm also that any driver so its files to 'x 86' folder, it will be impossible to install. If I changed his name to another name of folder except "x 86", the driver will be installed successfully.
  Why? The folder name is "x 86" is a reserved name for the driver under windows xp? any document referred to this problem?

  Hello chyao,.

  Thank you for visiting the Microsoft answers community.

  If I understand what you're asking, you try to rename the folder i386 for x 86?

  i386 is a folder used by windows (one copy installation files) and cannot be changed to raise the questions you had. The file has not to be present for Windows runs correctly, but before maintenance and repair, it is used. In your case Windows was looking for a driver in the i386 folder.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The referenced account is currently locked and cannot be saved in

  Hello

  About three days ago, I am entered the wrong password into my computer and received the error message, "the referenced account is currently locked and cannot be saved to." I let the computer turned on for a long time see if this resets eventually, but I get the same error message. There are no other accounts on the computer and I do not currently have a password reset disk or the Windows 7 installation CD. I tried to access the system settings to turn off the need for a password to log on to the computer and change the date and time system, so the time lock should be reset, but it did not work.
  Any help would be appreciated, especially since if I had reset and reinstall, I would lose a lot of files and programs that I have purchased, which would be expensive to replace. Another friend of mine had a similar situation, but the blocking period was 30 minutes, so I'm not sure what the problem is here.
  Thanks for your help!

  Your running your PC mode at high risk:

  -No disc reset
  -Only one single admin account
  -No backup file
  -No installation media for your applications (and maybe no list of product keys)
  -No CD repair
  Each of these steps takes only a little effort to implement. Without all in place, you are likely to get hurt someday. You can probably fix your current problem as follows:
  -Ask a friend to burn a CD to repair for you.
  -Start the computer with this CD.
  -Use a system restore to set Windows in a week.
  -Revise the list above.

• "delete file" message box, font size too small and cannot be changed in ALL the usual ways

  message box "confirm deleting the file" (one you get when you try to delete, no matter what, the thr office), are too small and cannot be changed in ALL the usual ways

  I have tried all the usual ways, IE display properties, appearance menu advanced.

  It must be in a place of system resources, I can not find.

  any suggestions?

  message box "confirm deleting the file" (one you get when you try to delete, no matter what, the thr office), are too small and cannot be changed in ALL the usual ways

  I have tried all the usual ways, IE display properties, appearance menu advanced.

  It must be in a place of system resources, I can not find.

  any suggestions?

  have you seen these

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/small-window-pop-up/1d1ae5b6-fb1f-4135-a75c-d1b01f1b046d

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/when-i-play-games-on-Facebook-or-Pogo-the-pop-up/447d6349-3345-4102-9cd8-025485d9f992

• The referenced account is currently locked and cannot be logged on to. How to unlock it?

  This is the error I get when I enter the correct password also. I have Windows VISTA and I have a set a local policy for the account lockout threshold. My friend wanted to break my password without knowing it. It is not a domain account. Mine is an independent home PC. There is a single account that is my account. I tried in safe mode (even with the command line too), but even then I get the login screen & tell me to enter the password. If I enter the password, it says "the referenced account is currently locked and cannot be saved in. There is no fingerprint reader in mine either. So how I now access my account & see my Office I couldn't since 4 days now! Suggestions, please WELCOME!

  Next time consider that to have a friend who does not really know what there mess in this connection with your computer isn't a good thing. Nor is defining an account lockout policy without knowing what you do or creating an additional administrative account so hot either.

  The faster and easier to solve this problem is to enable (disabled by default) built-in Administrator account and set a null (blank) password. Allowing this account will put an icon for it on the logon screen so that you can then you connect, make an emergency administrator account (call it something like 'CompAdmin' or 'Tech' or other), change the passwords of other accounts, etc.. When you are finished, log on the built-in Administrator and in the "CompAdmin" account and disable the administrator built-in again if you want this additional security (recommended). Leave the account "CompAdmin" rise and future emergency situations given that the account for your daily work must be a Standard account. See the end of this post for general information on configuring user accounts in Vista.

  http://home.eunet.no/~pnordahl/ntpasswd/

  Download CD (.iso) image and burn as an image, not as data. You will need a third party burning software. Then boot with the CD that you created and follow the directions.

  Once all of your changes, on the account of CompAdmin disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  General information of user accounts *.

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  ***

  Doing this requires a certain level of computer skills. You know better and if taking the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best course of action.
  MS - MVP - Elephant Boy computers - don't panic!

• The computer says to run chkdsk b/c the program files are corrupted. When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk. When I reboot, the chkdsk never runs.

  Original title: Program Files gone?

  Recently, I started my computer and noticed that a bunch of files are corrupt, and left most of my shortcuts.  I went into Program Files and discovered the entire file completely empty.  The computer says to run chkdsk b/c the program files are corrupted.  When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk.  When I reboot, the chkdsk never runs.

  My wife has all of its graduates work on the computer, I backed up since then, but I try to avoid doing a restore of the entire system.  Can you help me?

  I am running Microsoft XP.

  Sorry to hear that you are having problems with your XP system.  For XP support please visit the link below
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.General

  Also, try to start the computer in Mode safe.
  When the computer is switched on 1, start pressing F8 until you get a menu of Windows startup, choose Safe Mode.

  Sounds like something important happened (corruption).  If you have important data there (for example, your wives, diploma work), I would strongly suggest taking the computer to a qualified technician so that they can recover data out of there before the drive goes down or the o/s is too damaged.

  Good luck

• Win7 log in problems: "the referenced account is currently locked and cannot be saved in.

  I've seen a few posts related to this error, but nothing of quite like what I feel... My service company COMPUTER is perplexed and they have tried a bunch of stuff at the end server without result, so want to recreate the image on my computer, I don't want to just cause it's a pain.

  I have 2 computers in my workplace. A desktop and a laptop both running Win7 that connect on the server in domain of companies. I use the same username and password for both, of course.
  The problem is with the laptop. Occasionally when I try to log in, I get a notification "the referenced account is currently locked and cannot be saved in" and I can not connect. However, if I unplug the network cable and try it, it works. If I plug the power cable back in and lock the computer, restart the whatever, I can connect properly. However, after a few hours or days, it does the same thing.
  So I'm not completely locked out of the system. It's really annoying to have to disconnect the network like that.
  It has not always done this... It allows to work very well, but it seems to have just started for no apparent reason. The main difference between laptops and desktop, is that the laptop has Symantec PGP Whole Disk Encryption, while the office is not.
  Any thoughts on what may happen and what can I do about it?

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Please do not hesitate to contact us if you have other questions related to Windows.

• Moved the folder "Pictures" of Mac and catalog image files shows no images. Cannot navigate to the appropriate folder in 'Files' Panel and cannot rename the folder "Images". How can I reconnect catalog image files?

  Moved the folder "Pictures" of Mac and catalog image files shows no images. Cannot navigate to the appropriate folder in 'Files' Panel and cannot rename the folder "Images". How can I reconnect catalog image files?

  You opened an empty catalog.

  You can try the following two steps to open the appropriate catalog file.

  1. Use the file-> open recent, open the list of all catalogs
  2. If this does not work, you will need to find the appropriate help for your operating system catalog file and double-click it to open it.

• I copied the 2 files to a DVD movie and he changed the .m2ts file format and it is not supported by Windows Media Player. How to convert files in a file type supported?

  Original title: M2TS

  I copied the 2 files to a DVD movie and he changed the .m2ts file format and it is not supported by Windows Media Player.  How to convert files in a file type supported?

  Hello

  The files have already been burned on a DVD and therefore cannot be converted. However, you can download and install third-party codecs to play .m2ts files.

  Codecs: Frequently asked questions

  WARNING OF THIRD PARTY
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Why the temporary files are created?

  Original title: temporary files

  Hi, I searched the Web for a long time to know "why the temporary files are created?"
  what I understand so far is there are temporary files created by MS WINDOWS, and others created by other applications like MS OFFICE APPS? RIGHT?

  - and understand that they are created for purposes of backup in the case of MS OFFICE applications,- and I do not know how? they are created when the App crash or every few minutes or what?

  - and I do not understand why "windows Temp files are created?"

  Show me examples please.

  Thank you

  Hello

  There are many reasons why temporary files may need to be created.

  Windows temporary files
  https://support.Microsoft.com/en-us/KB/92635/

  Wiki - temporary file
  http://en.Wikipedia.org/wiki/Temporary_file

  Wiki - temporary Internet files
  http://en.Wikipedia.org/wiki/Temporary_Internet_Files

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why all my files disconnect and re connect is no longer?

  Why all my files disconnect and re connect is no longer?

  @

  Hi Meg, thanks for your response. The files were imported from an SD card reader and I worked with them for weeks.

  As of this writing Adobe has reconnected the files automatically, YES! I think what happened was that I unplugged a disc, which was totally unrelated with

  in the project, but it was not properly disconnected. So I guess that Mac did not like this gesture...

• Why the Illustrator line segment tool cannot do a.5 pt?

  Why the Illustrator line segment tool cannot do a.5 pt? When I create a line at 90 ° or 180 ° I can't do the thinner than PT race. 1, even if I create the line first and then try to change his race. When I create a line at any other angle I can make the thickness of line I want to by changing the line weight. What I want is to make the line segments which sont.25 ou.5 pts, but least Illustrator will do is pt 1 even if I select the line or rectangle and try to change a.5 ou.25 pt. This same problem exists with the rectangle tool when I create a rectangle oriented at 90 ° or 180 °, but if I rotate the same rectangle what whatsoever other than 90 ° or 180 ° I have then the possibility to change the thickness less than 1 pt. Any ideas what's happening?

  Select all the objects and in the Panel processing uncheck snap to grid of pixels. Also if you want, uncheck this option for new objects in the transformation Panel menu.

• Why the swf file have a few lines on this subject?

  I did a software simulation and published it as the swf file. And I don't know why there are a few lines on the screen when I play it in IE? Just like some lines in the fax, we ussually see. I have no problem playing captivate. What's not? And how can I change it? Thank you.

  Hello

  Make sure Advanced project Compression is not checked, preferences in

  Here is the screenshot

  

• After FlashPlayer 11.04, a site with videos, like YOUTUBE opens a separate process and videos appear in the upper left corner and cannot be moved.

  After update to a version after FlashPlayer 11.02 when you open a window with flash videos on, next to the Firefox process in the taskbar appears a new process with the Flash Player icon and the video window is placed in the upper left corner and cannot be moved. If there is more a video on this page when you click on that Flash Player icon, you can see a list of all the videos.

  Using Flash Player 11.02 this problem does not occur and I used this solution for quite awhile, but now, if I use this version, I get a black window with an error message on security reasons, but if I click on it it plays without any problems. Although in a few Web sites that require Flash, he says he needs at least version 10, but I 11.02 but does not recognize it and ask to be upgraded.

  It's very weird because that doesn't happen in my laptop, I have a desktop computer with the exact same windows and version Firefx and this happens. I already tried uninstalling Firefox completely and even remove all plugins and extensions, and the problem persists.

  Uninstall Flash player also solves this, but then I wonder to upgrade the Flash player. This problem occurs in Chrome or IExplorer 10:

  http://Tinypic.com/view.php?pic=15pn2ab & s = 4

  http://Tinypic.com/view.php?pic=24v2u4l & s = 4

  Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox are most likely caused by a recent update of Flash 11.3 and/or Real Player browser plugin to malfunction.

  To resolve this problem, follow the steps in these articles in the Knowledge Base:

  Flash Plugin - maintain and troubleshoot

  Adobe Flash plugin has crashed - avoid that it happen

  11.3 Flash does not load video in Firefox

  We'll find other information on more technical issues under these links:

  http://forums.Adobe.com/thread/1018071?TSTART=0

  http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

  Please tell us if it helped!