Why the driver update fails with the error code 800705 b 4 when I try to install the latest video driver for my Dell vostro Intel computer laptop?

Windows Update tries to update the Intel driver newly released my laptop Dell Vostro 3750.
I get error code 800705 b 4 every time.
Any ideas as to the cause?
I get system freezes lately and want to make sure I have the latest drivers for all my hardware before contacting Dell technical support.

Thank you.



Also, check your windows update settings and provide recommended updates is not selected for the automatic update, but only the important updates.

Aside from not not using drivers available under recommended updates, for all other first check the details as to whether its relevant for your specific use.

Tags: Windows

Similar Questions

  • Error code 646 is displayed when I try to install the following updates

    I have a problem installing the following 4 major updates, whenever I tried they do not give an error code 646
    Update of security for Microsoft Office Excel 2007 (KB973593)
    ImportantUpdate for Microsoft Office Word 2007 (KB974561)
    Update of security for Microsoft Office 2007 System (KB973704)
    Update for the junk e-mail in Outlook 2007 (KB975960) filter

    Hello Sue A31.

    Thank you for using the Microsoft answers Forums.


    Solution for error 646:

    Disable all Firewalls and try to install the updates and the stand-alone installation (download manually).

    Reset the Windows Update components


    Restart the computer after the update is installed.

    Also check with



    That should solve the problem.

    Thank you.

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C



    Update for Microsoft Office Word 2007 (KB974561)
    Update of security for Microsoft Office 2007 System (KB973704)
    Update of security for Microsoft Office Excel 2007 (KB973593)
    Update for the junk e-mail in Outlook 2007 (KB975960) filter


    Try this 1st to see if it helps, and it should:

    Description of the Patch registration cleanup tool


    If necessary :

    Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
    or the update itself - double click a view more information (or click top then discovers on the right)

    Those who will take you to a page where you can download the update.

    Or go here and the KBxxxxxx number to download it.

    Download Center - mount the KBxxxxxx.

    Microsoft Download Center

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Then you can right click on the update in the updates Windows and HIDE.

    If you get an error Installer install this version:

    Windows install 4.5 Redistributable


    Then run this:

    How to reset the Windows Update components? -a Mr Fixit

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7

    Because these are all Office updates you might get more information if necessary in the Agency of those groups that
    may have experienced the same problem.

    Office newsgroups

    Microsoft.public.office.misc discussions


    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates

    The security updates, you can get free support Incident report

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Get the error code 0 x 80070643 when you try to install the Office 2003 security updates

    I tried to install updates for Office 2003 security for several weeks now. Updates are downloaded but continue to fail with the error code 0 x 80070643. Can someone help, please?


    Were there any changes made to the computer before the show?

    Please follow the steps in the link.

    You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services


  • Using XP SP3 - updates failed with no error code

    No indication of failure lie in the history of the update and the only reason given is that 'something' on my computer prevents installation

    MS security Essentails updates so accessible via the Essentials program.

    I try did ' t the last suggestions in your answer as to the similar steps had been informed by e-mail MS second, Support.A support indicated an error code in the update log (800704dd) code of a missing or corrupted registry key = HKEY_LOCAL_MACHINE\SOFTWARE\Microspft\Windows NT\CurrentVersion\Winlogon\Notifv.  Then followed a whole list of registry keys to paste in a "fixit" file and I am now able to install updates and dose it doesn't seem to be a security problem.

    Thanks a lot for your advice and tips

  • I get the error code 0 x 80240036 when you try to install the updates.

    I just be reformatted my old pc. Dell Dimension 5000, 9 years. Windows XP. I try to use the windows updates, but he repeats to me "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem"and I get error code 0 x 80240036.

    I installed internet, itunes etc so I know that the computer is updated for other programs.

    I reformated this computer once or twice during his lifetime but did not encounter this problem before.

    Any advice would be great.

    Thank you

    Original title: Windows update problems on pc of the year 9 after reformat

    Hello Crom

    My first advice is to slowly get out of Windows XP... It's time to upgrade, but that's my opinion.
    This problem is very common and can be easily solved by:
    1. Download the latest Windows Update Agent
    2. Then click on your keyboard click the Windows + R at the same time
    3. Type CMD and press enter
    4. Now, enter the command

      net stop bits

    5. Run the Windows Update Agent
    6. Enter the following command at the command prompt (step 2):

      net start wuauserv

    7. Now, enter the command

      Net start bits

    Let me know if it solves your problem.
  • I want to remove updates failed with an error code 00000646

    00000646 error code

    On the contrary, have you tried to solve the problem of error 646 using this automated Fixit:

    http://support.microsoft.com/kb/2258121 ?

    All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

  • Windows updates fail with no error code

    I reinstalled Windows as suggested, and it seems that updates are now mode as it should. I wish you to know how the virus was picked up. All my computers have the latest updates of security products.

    Thank you for your help in this matter.

    I wish you to know how the virus was picked up...

    By your computer previous on the same wire, most likely because you do not have to completely remove the preinstalled Norton free version of evaluation BEFORE you upgrade Windows XP to Vista AND you installed McAfee Antivirus Plus AND BEFORE that you have installed the Vista updates everything (including the Service Packs & IE upgrades).

    Chances are that the McAfee application ever installed or worked properly.

  • I get the error code 0 x 80246002 when you try to install Windows XP Service Pack 2 on my machine.

    I recently did a complete reformat of the hard drive due to other errors.  I also have errors like the file is corrupted after trying to install other files of other non-microsoft Web sites.  Any ideas?

    Vista SP2 is available through Windows Update?

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Any of these applications running in the background when you attmpeted to install SP2?

    A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version that came preinstalled when you buy it and that would have been reinstalled, but invalid, when you reinstalled Windows)?

    The foregoing despite...

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Error code 646 is displayed when I try to install & reinstall KB2680317. It will not install

    I tried typing in the KB2680317 and tried a manual install and again, it won't install the update but comes up with the error code 646 and 1 update failed. What can I do else? Thank you!


    These can help you:

    Method 1: Run the Microsoft fixit

    Review the information in the site mentioned below


  • error code 0 x 641 when you try to install KB2686828, KB2656370

    For at least a month, I get a message that the updates are available when I stopped. But they always fail to install, even when I try to do it manually with the firewall off. All Solutions?


    Have you made changes on the computer before this problem?
    Method 1:
    I suggest you try the steps from the following link:
    How to resolve problems connecting to Windows Update or Microsoft Update
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756) how to back up and restore the registry in Windows.
    Method 2:
    I would say you can do clean boot and install updates:
    How to configure Windows XP to start in a "clean boot" State
    Note: reset the computer in normal mode once the diagnosis is complete.
    Method 3:
    I would say that you can download and install the updates from the Download Center.
    Security Update for Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP
    Security Update for Microsoft .NET Framework 1.1 Service Pack 1 on Windows XP, Windows Server 2003 (64-bit), Windows Vista and Windows Server 2008
  • Error code 0 x 80070017 when you try to install Windows 7. Going back to Windows 8.

    Original title: error code: 0 x 80070017 while activation of windows 7

    I'm trying to change my OS from windows 8 for windows 7 Professional, but I am its telling me file error: 0 x 80070017 missing, please, how can I solve this problem?


    Error code 0 x 80070017 means bad media. Files that are copied to the drive it are not on the hard drive with the same structure, which means that the 'original' files on the drive are modified/changed/corrupted while being copied to the location of the 'destination' on your hard drive during installation. You can create a USB key by following the steps in the article.

    Installing Win7 using a USB


    You can go through the discussion on the following thread for more on the subject.


    Let us know if you have other questions related to the issue.

  • Error code 646 is displayed when I try to install & reinstall KB2680317. It will not install and my pc (Windows Vista 64-bit) keeps crashing.

    My pc has attempted to install Windows Update (see above) without success. Tried the Microsoft Fix It without success. Computer continues to crash with attempts.



    Were there any changes (hardware or software) to the computer before the show?
    Method 1: try the manual steps from the link below and see if the problem is resolved.
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
    For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    Method 2: perform the steps from the link below and see if it helps.

     Method 3: download and install the update manually and see if it helps.
    Hope this information helps.
  • Windows Update KB979482 always fails with 8007065E error code

    KB979482 fails with 8007065E error code. All other updates are successful.

    Running Windows Vista Edition Home Premium SP2.

    Here are a few excerpts from C:\windows\windowsupdate.log:

    ... ~ snip ~

    DnldMgr * updates to download = 1
    Agent * title = update security for Windows Vista for x 64-based systems (KB979482)
    Agent * UpdateId = {8D253BCE-EB56-47C2-AA58-E5D3F7173CC9}.103
    Agent * bundles 1 updates:
    Agent * {BD1DEFF4-A43A-455A-8174-6050A6010AE4}.103
    ... ~ snip ~

    Automatic update fails...

    ... ~ snip ~

    Manager of FATAL: UH: 0x8007065e: CreatePackage failed in CCbs::CreatePackage
    Manager of FATAL: UH: 0x8007065e: StartStagePackage failed in CUHCbsHandler::StageCbsPackage
    Generation of FATAL Manager: request for CBS full update with hr = 0x8007065e and pfResetSandbox = 0
    Manager of FATAL: Source of error is 106.
    FATAL DnldMgr: DM:CAgentDownloadManager:GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x8007065e.
    DnldMgr error 0x8007065e occurred when downloading update; notification of dependent calls.
    ... ~ snip ~

    So I tried to download KB979482 here:

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=9622 and run it standalone.

    However, when I try this, Windows Update Standalone install displays the message"this update does apply to your system."

    I can live with that (if the message is actually true). But if if this patch does not apply to my system, then why Windows Update keep trying to install it as an update 'important '? How can I get off the list so that the Windows Update log is not cluttered with all of the failed attempts?   Finally, I ran Windows Update Fixit tool available.  He fixed a couple of things (default location, another minor config) but not this problem.

    P.S. running BitDefender 2012 if it matters...

    To answer my own question, you can reset the status of the following method KB2509997 8 download and rename the folder C:\Windows\SoftwareDistribution. It would be nice if there was a less force brute to do this, because she loses all your update story and settings, but at least it works.

  • Receive the error code: 0 x 0070017 when I try to save it on a Vista 32 bit.

    Original title: I get the error code 0 x 0070017 when I try to save it on a Vista 32 bit. I tried disk repair & restoration. does not work. any help appreciated, Doug

    Recently, I have code failure error 0 x 0070017 when I save.   Using the error checking & repair disk hard does not help, nor restores at the earliest.  I tried the restore dates & get restore disk failed. All the disks are clean virus according to Norton 360.   This computer running Vista 32 bit.

    Any help is appreciated... Doug

    Hi Doug,.

    1. What is the full error message that you receive?

    2. are you trying to backup to an external drive?

    3. you have any third-party backup program installed on the system?

    4. have you made a recent software or hardware changes to the system?

    I'm sorry to know that you are always faced with the question after performing a restore of system and control of disk. However, you can try the following steps and check if it helps:

    Method 1:

    You can try to change the backup location and see if it helps.

    For more information, see the article:

    Change when you save your files

    Method 2:

    You can temporarily disable antivirus software and firewall on the computer as a test and check if it makes a difference.

    If disabling the antivirus/firewall resolves the issue, you may need to configure the settings of the antivirus/firewall accordingly. Please contact the software vendor for assistance in this regard.

    Note: Make sure that you enable the antivirus software and firewall after the test.

    Please post back and let us know if the steps helps to solve the problem.

Maybe you are looking for

  • use several fixes for live

    Hello; Sorry if this is a stupid question, but we'll have our first live concert in 2 weeks and I need some information. an instrumental songs is running in the background (desktop dj) and we want to add some live and vocal instruments using the main

  • How to use the scanner as a scroll

    Hello I have lenovo e40-70, how to use the scanner as a scroll wheel?

  • VI crashes has been closed

    I built a VI using LabVIEW version 8.5 call API of TestStand version 4.0. An hour ago, I've migrated to 8.6 LabVIEW and TestStand 4.1 simultaneously. When I close the VI, debugger window just-in-time visual studio appears just above the LabVIEW debug

  • HP Pavilion G6 1356-el; CPU and card mother temperatures

    Hi, I am a happy owner of this laptop great, but I have a question: when I play videogames temperature is about 70, even 80 °, talk about the (2450 m i5) CPU and motherboard. What is normal and safe, your should I need to worry and buy a basement of

  • Adobe 3.0 broken on 75 + computers in any field at the same time.

    Thus, we encountered a problem where Audition 3.0 has just stopped working on multiple computers through our domain from Windows XP to Windows 7.When you try to launch the program, we receive the following error message:An error has been detected wit