Why the firefox rendering engine go berzerk and display garbage?

Similar Questions

• Why the firefox profile is messed up and does not restore the tabs when you replace the Windows shell with something like bbLean

  I use Windows 8.1 x 64 but I can replace the Explorer bblean shell and when I do that firefox has issues with the profile such that cancel last closed tab or not to restore the tabs at startup.
  I was able to use the replacement of shell of bblean for years in previous versions of Windows, but he always had a weird behavior with firefox. Of course, I am currently in contact with bbLean developers working on the problem, but I would also like to hear what may be the cause of this.
  Thank you in advance.

  @guigs2
  Thanks for responding but I solved it somehow.
  'Replace the shell' means that I have deliberately change value in HKCU NT\CurrentVersion\Winlogon\Shell so it does not point explorer.exe but blackbox.exe.
  After the reset of my installation of windows and get rid of all programs, including firefox now I use firefox portable (not installation of vanilla from the original site) and found, I have no problem with profiles so far.

• I'm trying to get a playback loop by using the multimedia rendering engine

  As part of the MP3 standard, there is a gap of millisecond 20 at the beginning of each file.

  so when I have an MP3 in a loop there is a sudden gap when the queue restarts.

  So my question is... Is there a way to tell the media rendering engine a loop between two points in time.

  This way I can order the system to loop from 20 ms at the end.

  Interesting on iOS, it ignores that initials 20 incomplete milliseconds and work very well.

  (I chose to use an mp3 file as it is 4 times smaller than a wav file and is currently at 1 MB)

  I could probably use an OGG format, but I have not seen all documentation saying that this is actually supported.

  I found this link

  http://www.GameDev.NET/page/resources/_/technical/game-programming/introduction-to-Ogg-Vorbis-r2031

  explains how to load with OpenAL ogg files

  I have openAl race (wish I found this link earlier)

  Thanks for everybodies help

• ? "Your site has migrated to the new rendering engine.?

  When I went to my dashboard it says "your site has been transferred to the new rendering engine. Please read the Site Transition FAQ (partners only). »

  What does that mean? Am I supposed to do something?

  
  

  This is one of my 5 free sites I get with creative cloud and I hope that doesn't change. Thanks Wendy

  Hello

  No, you don't have to do anything, it is a notification to inform you that your site has been moved to a new rendering engine. Please refer to this FAQ about the transition, that should answer all your questions.

  Website Transition FAQ

  Let me know if you have any question.

• Why the Firefox on Android is so great? It uses 20-60 MB and fills the volume? (App: 24MB.) Data: 30 MB +)

  Summary:

  Firefox using too much space on my Android phone, and this causes problems on my phone for example errors "Low on space". Android applications are unable to obtain updates to security due to the use of the high area of Firefox, which is a security problem.

  Why Firefox uses as much space and how to prevent or solve this problem?

  Details:

  I am running Firefox on Android 2.3.4 18.0. I then Firefox my 8 GB SD card. This problem also occurs well in Firefox 19 & 20 of Firefox.

  Firefox uses a huge amount of space. This is the largest app on my phone by a long shot. It seems that Firefox will grow without limits, until what it triggers a "low on space" warning on the Android device. When this "low on space" warning is reached, Firefox becomes unstable and I'm unable to install other Android applications. Often applications cannot be updated due to high usage space of Firefox and cannot receive updates of security which is a security problem.

  Please see the following screenshot that shows that Firefox uses about 30 MB worth of space and is approximately two times larger than the next largest app, Google Maps.

  https://www.dropbox.com/sh/7di3oh1p98bh68v/AoxNuqMKd4/2013.01.20-16.17.40.JPEG

  If I go into ' settings: Applications: storage use: Firefox ", Android tells me that Firefox uses the following amount of space:

     Storage:
     Total: 29.60Mb
     Application: 1.85MB
     Data: 27.76MB
  

     Cache: 0.00B
  

  When Firefox is freshly installed, the "Total:" use is closer to 3MB. But in the coming days, this number increases to 30 MB.

  Why Firefox uses as much space and how to prevent or solve this problem?

  Thanks for pointing the "browser.cache.disk.parent_directory" option I understand the implications of privacy to store the cache outside the profile directory, but I don't have much choice. Firefox as an App has increased slightly with the latest version (8 MB to a value of policies) and my phone was so full that the system was not the application updates to security for other applications. I have that is need to get this resolved the problems of disk space or I will stop using Firefox.

  I did it for free space:

  1. Create a new folder on my SD card ("/ mnt/sdcard/something /")
  2. Under ' subject: config' set browser.cache.disk.parent_directory to match the new directory created previously.
  3. Restart Firefox (I had to kill the Firefox application)
  4. Went to a few sites such as Facebook and Pinterest cache-heavy
  5. Checked the cache didn't work under ' subject: cache'
  6. Remove old files from the cache in my foo.profile/Cache Directory
  7. Went to "subject: config' and came back some of my manual settings that it took months to save disk space."

  Now Firefox uses 10 MB less space on the memory of my system, then he has done it before. I can also make the larger cache (much larger) which will speed up the display of Web pages.

  I couldn't create a symbolic link from my old Cache Directory to the new directory of Cache.

  More info about "browser.cache.disk.parent_directory" can be found at http://kb.mozillazine.org/Browser.cache.disk.parent_directory

• Why the Firefox Support Home Page open automatically as my second tab, to the right of the home page, when I launch Firefox, and how can I stop this?

  I recently installed Firefox 4 on my computer under re - install my OS. Firefox opens now with 2 tabs: my host specified, and to the right tab, a tab of the Firefox Support Home Page. I guess I did something to cause it, but how can I cancel it?

  Reset your home page and make sure that only one tab is open when you set your homepage.

  http://support.Mozilla.com/en-us/KB/how+to+set+the+home+page

• Why all of a sudden I get an error message saying that the Task Scheduler engine stopped working and was closed? How can I fix the problem?

  I don't know what has been done to cause the TASK SCHEDULER ENGINE TO STOP WORKING. What should I do to correct this?

  Hello

  Apologize for the delay in response. I suggest that you mention 'Sidi Y' suggestions in the following link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/getting-error-on-startup-Task-Scheduler-engine-has/883004c6-C06D-E011-8dfc-68b599b31bf5

  Hope this information helps. Back to us for assistance.

• Why the Firefox address bar usually take me on the site?

  Why the habit of the URL in Firefox address bar take than me to the requested site?

  Hello, what happens instead? You can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• problems with the firefox search engine

  When using my hotmail email today when I I closed it got stuck with the msn home page, I have managed to recover the firefox home page, but the search is made by BING, I don't want that I want as before google. It seems if be produced since firefox 18 was delivered

  Can any body help to get this back as before

  Try to reset default preferences with the SearchReset extension:

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  You can check the pref browser.search.defaultenginename (s) on the topic: config page to see if it has the value of Google by default.

  If there is a problem with the search through the default value: home page and then try to reset the search engine used on the subject: homepage.

  Reset the pref browser.startup.homepage_override.mstone through the context menu by default on the topic: config page and close and restart Firefox to restore the on: default home page.

  • http://KB.mozillazine.org/about:config
  1. Open the topic: config page through the address bar
  2. Type in the filter bar: mstone
  3. Right-click on the browser.startup.homepage_override.mstone line, and then select: Reset
  4. Close and restart Firefox

  If this did not help, then remove the button Delete the chromeappsstore.sqlite file in the Firefox profile folder and repeat the foregoing.

• The Mercury Playback Engine GPU acceleration and activate mercury pass question

  So, I'm working on Windows 7 Professional 64 bit SP1 (my father built my desktop and here all the info I get off Speccy on its parts)

  -CPU: AMD Phenom II X 4 965

  Deneb 45nm technology

  -RAM: 8.00 twin DDR3 @ 669 MHz

  -Motherboard: ASUSTeK Computer Inc. CG1330 (AM3)

  -Graphics: VX2770 series j (1920x1080@60Hz)

  ATI Radeon HD 5700 Series (ASUSTeK Computer Inc.)

  -Hard drives: 932GB Seagate ST31000528AS peripheral ATA (SATA)

  -Optical discs: BD - RE of HL - DT - ST WH14Ns40

  
  

  Now, recently I'm subscribed to Adobe first CC 2015 and I open a project file that was originally a Mac computer (the disc has been formatted to be read by the PC and I got this done before so thing Mac PC should not be a problem)

  The first message, I thought "this project has been modified used with playback engine Mercury GPU acceleration (OPEN CL), which is not available or not certified on this system. Only Mercury playback engine software is used.

  I didn't know what to do with that I just said ok, just the project upward and running and everything is fine except the audio continues by cutting. He will play for about a minute on it before the audio starts to cut.

  I played a bit with my preferences and settings and preferences in reading, there is a setting that says "Enable mercury transmit." Thereby the option checked I get the audio cutting out (there are a few options with the audio device being Adobe DV or Adobe Desktop Audio sub and an option for the video device said Adobe DV and I can check or leave it disabled but results remain substantially the same.) Now I have it on Adobe audio, DV with Adobe DV checked and it goes a little long before audio cutting comes in)

  Now, if I uncheck Mercury Select pass he plays wise audio fine but after about a minute, playback stops. Literally paused, it is it's not freezing acts as I pressed pause when I touch my mouse or keyboard.

  I tried to do a new project and import all of the images in it to see if it would help, but the problem persists. My pictures comes from multiple sources, including a Sony DSLR and Iphones.

  Please tell me this is a fixable bug and Adobe CC is not incompatible with the office somehow.

  CineForm is a codec made specifically to be a "Digital Intermediate" or post-processing format. The company that created it was bought by the people of the GoPro and is used in some of their cameras. It is designed for the achievement of quality thanks to a multi-generation processing pipeline post, without loss of quality when a step is rendered on export to another station in the process.

  There were two objectives: one, it kept ALL quality through export operations repeated at a high-end professional examination and two that it was like 'light' on the processor of a computer while encoding off to play as possible. So it is not nearly as packed as many other codecs (like most H.264 & tel) and puts MUCH less strain on the CPU. It's usually large files, well that say not nearly as big as as DPX frames-based form. Does a little more direct work on the disc reading process to have been a bit bigger... but... This is a place you should have excess capacity in your system. We rarely have spare CPU capacity.

  To get it, you go to the website of the GoPro and download their free GoPro Studio, I think it is called and install. Who installs Cineform on your computer, and then you can transcode via the endoder that comes with PrPro, Adobe Media Encoder, which allows batch and same file transcoding and control things like a time for a process. Or you can do it via using Adobe prelude to ingest, rename and say: place the renamed files 'original' in a single folder permanent conservation while making another series of the same name but transcoded to X codec and laid in this case here to work with.

  Of course, you can use the (Mac) ProRes and DNxHD/R (PC) to work with, and in their larger versions, less compressed, they work just as well.

  All three codecs can be used for import in each program level pro, I know. PC cannot export ProRes that Apple will not allow the codec out of 'their' sandbox sand and DNxHD/R has been designed to work in Windows (although as ProRes, can be read / most of the Mac edition). CineForm works anyway.

  And as always in the work of pro, we deliver an export of output in that to the customer at the end of the job. If the original codec of the camera and the codec to work when editing... does not matter. Other than to be a step in the process.

  Neil

• Why the back my mail list, text and phone iphone 6 freeze after upgrade ios10

  Why my list of e-mail, text and phone iphone 6 freezes after upgrade ios10?  Have you tried to turn it back on.  Becomes a real pain in the uknowwhat.

  I had the same problem at first but I was testing the first version of ios 10.  but the reason may be due to the low storage? If your storage space is ok please go to settings then general try to look for the software update again just to make sure that you use the latest version of ios usually there a few times an update immediately. If none of these solve the problem, try now button the power button and the home button at the same time (the screen of your iphone turns off a few seconds) touches both simultaneously when you see the apple logo on your screen if all else fails you can try connecting your device to itunes on a pc and run a quick diagnostic test? you go to itunes on a pc if you have already installed on your pc, laptop etc... Look at the upper left side... Click the help... Go to the bottom of the list to "Start the diagnosis" (make sure that all the test boxes have a tick and click ok to run the test) PLEASE NOTE your iphone you will need to be connected to the computer before hand... hope this will help you know if there is a problem, but when I came across this problem with my camera it was because my storage was almost full on my device and in icloud if This is the case then you need to maybe buy more storage or delete applications or games, you do not use this should help solve the problem of storage (if your device is low on storage)? hope this helps somehow.

  Nice day.

• Why the firefox search bar does not work?

  If I type a website or search for words in the Firefox search bar and hit 'return' nothing happens. If it's a site I went to before, if fills but when I hit 'back' nothing happens.

  I use Firefox on a Macbook OS X Yosemite 10.10.2 36.0.1

  Pkrys said

  If I type a website or search for words in the Firefox search bar and hit 'return' nothing happens. If it's a site I went to before, if fills but when I hit 'back' nothing happens.

  I use Firefox on a Macbook OS X Yosemite 10.10.2 36.0.1

  I actually ended up doing an update of Firefox. My problem is solved. Thank you.

• My search for the addr.bar engine is google and in the search bar - wiki en. But now, the search bar engine overrides the addr.bar one. I want to change this

  About: config keyword.url is set to http://www.google.ru/search?hl=ru & q =
  In the my search engine search bar is en wiki.
  At the moment the engine chosen in the search bar, substitute one chosen for the address bar. But I would like to use both.
  I guess this problem may be caused by the new update, but maybe something can be done about it?

  Hello, Yes, consolidating the search options in the search bar, address bar and the default homepage was a change deliberated by the developers. You can use the keyword search by mike kaply extension work around this if...

• After update will not completely re-checkin for update and then reloading the firefox update page. (all deleted and the problem persists).

  Firefox updated as I wanted. Now, each I reopen the application is going through the screen of loading/updating before the opening of Firefox. When she opens the Firefox update page loads. I emptied everything (cache, connections, history, etc.). It will not stop. I hesitated uninstalling and reinstalling because it isn't always re - import settings, bookmarks, etc.. Love this browser and all software you provide.

  Hello Paul,

  You should look at this article on this specific issue and Preferences not savedarticle. It could be a problem of pref.js. It should give you all the information you need!

  If this does not work:

  1. Enter about: config in the address bar
  2. Click I'll be careful, I promise you if prompted
  3. In the filter field, type Startup
  4. Double click on startup.homepage_override_url
  5. Delete the text string, and then click OK
  6. Close Firefox and reopen the window to check that it worked.

  Hope this helps!

• Why the Firefox address line reacts to the entry?

  When I type a website URL in the Firefox addressline and
  Click on the arrow, nothing happens... ever!

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.