Why the HDR toning work with some pictures, but not for others?  I have CS6.

Similar Questions

• Why the Smart Guides work on some objects, but not others?

  Hello world. I try to use benchmarks commented to help me align a small arc in a corner, so I can merge into a larger shape. Well, I got my bow on one of the anchor points and I drag the path to full fitness, but no hanging, no label 'path' or 'intersection' appears. I have all the options for Smart Guides is checked and I've got Snap to Point activated but still no luck. It's a precise alignment, a guessing game. Any idea? -Mike

  

  Hold down the Cmd key while dragging.

• Free disc of Premiere Elements with the new camera. Installed on the pc and have shortcuts for items and items first. The serial No. work with Premiere Elements, but not Photoshop Elements. Why is this?

  Hi, I'm new to this bear so please with me. I have a free disc of Premiere Elements with a new canon camera and install it on my pc windows 8.1. After installation I have a shortcut for first elements and a shortcut for the elements, I guess that first for the video and photo elements. The drive came with a serial No. who worked with first, but when I opened elements, he asked for a serial No. but when I tried the same series only.  It says this serial No. is not valid for Adobe photoshop elements. I'm something wrong, I am missing a serial number, do I have to pay to use the side elements (photo editor), and if so I don't understand why he loaded the two programs on a disk I thought it was a big split in video and photo program.

  Help, please.

  Photoshop elements and first elements are two different programs (as you know).  they have different serial numbers used to activate them.

  If you were supposed to get both with your camera, you should have two serial numbers: quickly find your serial number

  However, is it possible that you had only to get a serial number of elements first and photoshop elements was provided as a trial (to see if you want to buy a serial number)?

• My filter (for ads) works for some shippers, but not for others

  I have several filters. One is "Advertising" for ads I want to read later, but need not be cluttering up my Inbox. It seems to work for a couple of the entries but ignores the rest. I checked the spelling, and they all seem to be correct. My settings are:
  Apply filter by operating manually,
  Apply the filter when getting new messages, filter before spam classification,
  correspondence to one of the following values
  Contains (followed by the name of the seller, such as honda, staples, cvs).
  Move messages and ads

  This is a support forum for Firefox. You will need to contact your
  e-mail assistance provider.

  The filters have all send your 'junk e-mail' folder, but the implementation
  a list of 'safe' for those that you want.

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Adobe Shockwave for Director Netscape plug-in, version 12.1.2.152
  Adobe Shockwave for Director Netscape plug-in, version 12.0.3.133
  
  Having multiple versions of a program can cause problems.
  You must remove older programs. Then download the current full installer.

  Shockwave Director:
  Shockwave Standalone install / Uninstaller {web link}
  Shockwave Director Version 12.2.1.171 http://get.adobe.com/shockwave/

• Newbie? Why did the CSS stylesheet work in some browser & amp; not in others?

  I'm new to DW - always used GoLive - make the transition.
  
  I created styles in an internal style sheet and them moves on an external style sheet. The page works fine on my computer with the external style sheet in every browser I check it in but... When I download the page with the external stylesheet to the server-it only works in Safari, Opera, Windows IE-6. It does work in FireFox 2 and Netscape 9. It is as if there is no stylesheet attached to the document. Can someone explain what is happening? I tried everything but can not understand. Don't know enough to ask the right questions in google.
  
  http://www.summitcom.NET/PII/index5.html
  
  Any help really appreciated.
  
  Thank you
  
  Jim
  
  
  
  

  Osgood,

  Thanks for the suggestion. You were quite correct. I have contacted my server company, sent the URL you provided to them so the owner could see what the problem was and would be able to fix it. They didn't believe me at first.

  They just called and said that they fixed. It now works correctly.

  Thanks for the help.

  Jim

• Why it give me the option of storage/memory login information/passwords for some sites, but not for others?

  Windows XP with Firefox 5.0 beta 1

  Some sites such as PayPal and bank sites use autocomplete = "off" to prevent Firefox to save and fill in the name and the password.

  If a site uses autocomplete = "off" then look at this article for a bookmarklet to remove the attribute autocomplete and Firefox will provide store name and password.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)
  • http://KB.mozillazine.org/Password_Manager
  • http://en.Wikipedia.org/wiki/Bookmarklet

• vCenter 5.5 sso works with web client but not for vsphere client

  Hello

  Just upgraded my vcenter from 5.0 to 5.5. In 5.0, I could connect to the vSphere client, using my creds of windows session, but now I can't and have to use the local account that is a member of the Administrators group local machine or [email protected]. However, it works very well with the web client.

  The Source of the identity seems to be correctly set. Have searched for a solution for four days. I'm at my wits end... :-(

  You may need to assign permission to your vCenter, refer to step #6: Back To Basics: vCenter post-configuration 5.5 installation (Web Client). VMware SMB - VMware Articles blog

• I changed my apple ID password. I restarted my computer and my iphone. My new password works with my laptop, but not my iphone.

  I changed my apple ID password. I restarted my laptop and my iphone. My new password works on my laptop but not on my iphone, I can't update my applications.

  iowaoma wrote:

  I changed my apple ID password. I restarted my laptop and my iphone. My new password works on my laptop but not on my iphone, I can't update my applications.

  Apps are tied to apple id and password that was used to download/purchase it.

  Try your old password and see if you can update or not.

• Ideas for why HttpConnection works with some clients and not others

  Hi, I have an application that downloads and analyzes an xml file. This works perfectly for some users and does not at all for others. They can even access the XML on the web, but it won't work with my application. Some said they used a bold font, other OS 4.5. Here is an excerpt from my source:

  HttpConnection conn = (HttpConnection) Connector.open(url);conn.setRequestMethod(HttpConnection.GET);String _node, _element;DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();docBuilder.isValidating();Document doc = docBuilder.parse(conn.openInputStream());doc.getDocumentElement().normalize();NodeList list = doc.getElementsByTagName("*");// .. parse data
  

  Edit: formatting is all messed up

  Not necessarily. You * can * make your app to use BIS-B if you are a partner of the Alliance and I recommend this, but this is not necessary.

  Your customers can also connect using WAP 1.1, WAP2 or direct TCP. I would recommend that you try WAP2 first, this requires no info gateway APN or WAP. You can get the WAP2 info directly from the maintenance book.

  Try the code in the example (in the white paper that I attached earlier).

  Your best bet is to develop some hueristics of network connection using the CoverageInfo class (see the documentation of the API).

  We are doing something like this, at the bottom of the list:

  BES

  BIS-B

  WiFi

  WAP2

  WAP1.1

  Direct

  I think that in the USA, CA, UK and Western Union, BES and BIS - B cover approximately 90% of users. Once you walk out of those areas, it starts to be more exciting.

• T500 GMA DVI Boot - Advanced Mini Dock: works with a monitor, but not another

  Hello

  I have a type of T500 2242 with GMA X4500MHD graphics in Advanced Mini Dock. BIOS 1.20, startup display set to the DVI connector. Cable DVI - D single-link of the dock-> DVI - D input on external TFT monitor. I get different results according to the attached monitor:

  (1) PX191 19 "1280 x 1024 native plane: splash screen appears on the external monitor.

  (2) "Topaz" Soyo DYLM24D6 24 "native 1920 x 1200 S: external monitor stays off, the splash screen appears on the screen of T500.

  I also have a T42 with Mini DVI - D Dock, -- this one shows the start screen on the 24 "monitor without problem, using the same cable dvi - d single-link I tried with the T500.

  In the case that this can help, EDID info here is for the 24 "monitor, of log file xorg running Linux on the T42:

  (II) RADEON (0): EDID data from the display connector: DVI - D -.
  (II) RADEON (0): manufacturer: XXX model: 76th serial No.: 16843009
  (II) RADEON (0): year: 2007 week: 30
  (II) RADEON (0): EDID Version: 1.3
  (II) RADEON (0): Display Digital Input
  (II) RADEON (0): Max H-Image size [cm]: horiz. : 52 green. : 33
  (II) RADEON (0): Gamma: 2.20
  (II) RADEON (0): doctors of Podiatric Medicine capabilities: standby Suspend Off; Display/color RGB
  (II) RADEON (0): first timer detailed is the preferred mode
  (II) RADEON (0): redX: 0.640 redY: 0.340 greenX: 0,295 greenY: 0.610
  (II) RADEON (0): blueX: 0,145 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
  (II) RADEON (0): VESA graphics Modes supported:
  (II) RADEON (0): 640x480@60Hz
  (II) RADEON (0): 800x600@60Hz
  (II) RADEON (0): 1024x768@60Hz
  (II) RADEON (0): mask of the manufacturer: 0
  (II) RADEON (0): future video Modes supported:
  (II) RADEON (0): #0: hsize: 1280 1024 refreshment vsize: 60 vid: 32897
  (II) RADEON (0): #1: hsize: 1920 vsize 1200 refresh: 60 vid: 209
  (II) RADEON (0): #2: hsize: 1152 vsize 864 refresh: 60 vid: 16497
  (II) RADEON (0): #3: hsize: 1280 720 refreshment vsize: 60 vid: 49281
  (II) RADEON (0): #4: hsize: 1680 1050 refreshment vsize: 60 vid: 179
  (II) RADEON (0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291
  (II) RADEON (0): #6: hsize: 1440 vsize 900 refresh: 60 vid: 149
  (II) RADEON (0): #7: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
  (II) RADEON (0): Mode supported additional video:
  (II) RADEON (0): clock: 154.0 MHz Image size: 519 x 324 mm
  (II) RADEON (0): h_active: h_sync 1920: 1968 2000 2080 h_border h_blank_end h_sync_end: 0
  (II) RADEON (0): v_active: 1200 v_sync: 1203 1209 v_blanking v_sync_end: 1235 v_border: 0
  (II) RADEON (0): serial number: U7301D2180063
  (II) RADEON (0): ranges: V min: 56 V max: 61 Hz, H min: max 30 H: 83 kHz, PixClock 154 MHz max
  (II) RADEON (0): name of the monitor: M24EI5
  (II) RADEON (0): EDID (in hexadecimal):
  (II) RADEON (0): 00ffffffffffff0063186e0701010101
  (II) RADEON (0): 1e11010380342178eac905a3574b9c25
  (II) RADEON (0): 1250542108008180d100714081c0b300
  (II) RADEON (0): 8bc09500a940283c80a070b023403020
  (II) RADEON (0): 360007442100001e000000ff00553733
  (II) RADEON (0): 30314432313830303633000000fd0038
  (II) RADEON (0): 3d1e530e000a202020202020000000fc
  (II) RADEON (0): 004d32344549350a20202020202000e0
  (II) RADEON (0): DVI-0 output activated by the configuration file
  in RADEONProbeOutputModes
  (II) RADEON (0): I2C device "DVI_DDC:ddc2" recorded at address 0xA0.
  (WW) EDID favorite synchronization clock 154.00 MHz exceeds claimed max 140 MHz, setting

  Maybe there is something wrong with the Soyo is EDID? Or a bad interaction with the T500 BIOS?

  I would be grateful for clues on how to get the start screen to display on the monitor 24 ".

  Thank you

  Frank

  Good news! I sent my T500 in-service, and Lenovo replaced the motherboard. Now, the startup screen is correctly displayed via the dock to my monitor's DVI port external 24 ". After what Linux / X sees the external monitor and it puts in place and it displays correctly. So: problem solved! Thanks, Lenovo

  Before the swap of the Board of Directors system, I was able to use a cable DVI DisplayPort / talk to the 24 "monitor. This requires an extra cable to plug/unplug, so it's nice to finally have the DVI dock work.

  It seems that this problem only arises with some ThinkPad + external monitor combinations. My original system card worked fine with a 19 "monitor. And another Member pointed out that a single version of a 19 "works fine with its T500 Belinea monitor, even if a previous version does not. (See this thread for more details.)

• Why my AS3 code working in 1 project, but not in another?

  I had a small project by working with simple buttons that worked very well. I had to restore my project and now it does not work. Ive cut all new code that I added and it did not work. I made a completely new project and copied the layers I'm testing and just the code that had the first working draft and it did not work either. any suggestions on why this might happen?

  This can be a bit of a twist when it comes to understand because this is what I consider an anomaly of the Flash.  If you have different instances of the same object in the adjacent images, then the object the latter will inherit properties of the thing seized.  Sometimes it works to your advantage and sometimes it will leave scratching you your head trying to solve a problem.

  You have shown just in case, you have an object in the frame of 30 and I guess it is the same object that is in frame 1.  Based on what I just explained as an anomaly, even if you were to remove the name of the instance of the object in the frame of 30, or call it something else, it will persist with the name of the instance assigned to it in box 1.  Try it and see - it should always work.

  However, if you interrupt (that ness adjacent) regarding placing a keyframe empty between frame 1 and 30, you will find that the button no longer works in the frame of 30.  He is most associated with the earlier proceedings.  To get back to work, you reassign Auditors properties.

• FX: Model works with mx datagrid but not spark?

  Using the example of Lynda,... MX DataGrid works but the spark does not work?

  Model is new to Flex 4, shouldn't it work with the spark?

  < fx:Declarations >
  < fx: Model id source="data/products.xml"/ 'productModel' = >
  < / fx:Declarations >

  < mx:DataGrid dataProvider = "{productModel.product}" / >
  < s:DataGrid dataProvider = "{productModel.product}" / >

  Model is not new.  Spark DataGrid requires a mx.collections.IList.  A model

  is does not implement that.

• JQuery working on some pages, but not all

  Hello

  I added a bit of javascript, JQuery scripts to my site.  My main site has a sticky menu script and a script of back button up.  Everything works fine on www.performanceaire.com.

  I recently added a new section of the site that looks like a separate site. All the files are on the same hosting account.  I added the same sticky script menu and return to the top button and none of them work on my new pages.  I created these files in dreamweaver and for my new article, I created a new site in dreamweaver, even if I'm downloading everything on the same hosting account.

  I mention this because it seems weird that none of my scripts work on the "new site" (section).  I keep thinking that it does not find the file JQuery javascript file. But all files residing together so I'm stumped.

  For reference, the page I added the scripts for is www.performanceaire.com/BypassDamper.html.   The script is called <! - sticky menu - > and <!--back to top button - >.

  The www.performanceaire.com/index.html page is an example of the same scripts work.

  Any thoughts would be greatly appreciated... I'm on a date limit and need this problem!

  Shannon

  You need not display the browser console and correct your mistakes in javascript:

  stickUp.min.js:1 Eception TypeError: $(...). is not an (anonymous) function stickUp.min.js:1 b .fn .b .ready @ jquery.min.js:26(anonymous_function) @ stickUp.min.js:1 b .extend .ready @ jquery.min.js:28 @ t @ jquery.min.js:36

  main.js:6 Eception TypeError: $(...). flexslider is not a function (anonymous) @ main.js:6 m. Callbacks.j @ jquery.min.js:2 m. Callbacks.k.fireWith @ jquery.min.js:2 @ jquery.min.js:2J @ jquery.min.js:2 .ready .extend m

  stickUp.min.js:1 Eception TypeError: $(...). is not a function

• ToolTip works with MS IE but not in Firefox

  Hello
  
  I have Image buttons that bear a label. Running the application in MS IE, the tool tip appers in a few seconds when I stop with the mouse on the e button. But not in Firefox. I couldn't find the Firefox settings that would allow a ToolTip. Did all an enconter this 'feature '? I have Firefox 3.6
  
  Tamás

  Tamas,
  check if the label property is used is ALT or TITLE, I believe IE also shows ALT as a ToolTip (if the TITLE is missing), while Firefox is not. Firefox only displays the TITLE as ToolTip, I'm sure he doesn't know ALT because that which is intended for the display of the text where the images are missing.

  Flavio

  ----
  http://oraclequirks.blogspot.com

• JavaScript works on one site, but not any other

  I have a javascript script to the copyright of my sites with the current year.

  It works very well on these:

  http://www.bringwowiehome.com/

  http://www.homephysiciancare.com/index.html

  http://www.whitakercdlsafety.com/

  but not on these:

  http://www.garegion2ems.org/

  http://www.amerimedems.com/

  http://www.amerimedmedical.NET/

  And for the life of me, I can't understand why

  Help, please?

  Where it doesn't work, change-

  Karen Moody ... © all rights reserved

  on this subject.

  Karen Moody ... © all rights reserved

  See if that helps.