Why the highlighting of text in a PDF document does not work after you save the file

Why the highlighting of text in a PDF document does not work after you save the file

What application you use to highlight?

Tags: Mac OS & System Software

Similar Questions

  • print DigitalPersona finger scanning does not work after you install the recommended updates

    My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista


    1. do you have an error message?
    2. are you referring to the print scan hardware or software scan print that was supplied with the device?

    Method 1:
    I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

  • Laptop does not work after you remove the virus win32/winfixer

    Original title: win32/winfixer

    I had cleaned up my n cell phone it's a bad virus win32/winfixer and now my laptop does not work because I deleted it and also my big computer will not work right there problem downloading it says it needs to microsoft.net1.1sp1 ep, but it does not load become crazy pls help me...


    1. what exactly happens when you start on the desktop?

    2. you get any error message?

    3. is your laptop work fine in safe mode?

    4. What are you trying to download?

    5. How are you trying to download?

    6. What is the full error message do you get?

    7. don't you make changes to the computer until the problem occurred?

    I suggest you to see link below and check if it helps.

    Method 1: How to fix a computer that does not start.


    More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

    Hope this information is useful.

  • HDMI port does not work after you refresh the computer.

    Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.

    Are you sure that the additional monitor is turned on.  Try holding down the and then press P until it is selected to extend the screens.

    If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.

  • Re: Portege R500: controller button does not work after you install the update

    After you have installed the latest version of Toshiba Value added Package, the two buttons (toshiba assist, and backlight power) do not work properly: they open instead a window of Firefox.

    I guess there is something to configure in the section "Optimizing" Toshiba Assist.
    When I open the program "Toshiba buttons functions" (sorry for the puny, Spanish translation, it is called: "functions of Toshiba botones") all entries are empty and I have to enter the Url of the program supposed to turn off the backlight of the screen of my LCD...
    I have no idea where to find this executable.

    Can someone help me?

    Why you n t use the OS restore option?
    The operating system supports the option of system restore and this helps to put the system in the previous point.

    Check, maybe it helps to get the old version of the Toshiba Package Value added.

  • PDF Maker does not work after loading Office 10

    I've read other messages of the forum on this issue and none of the solutions worked.

    Office 10 doesn't have a normal.dot file to rename or delete.

    I applied the patches to register unsuccessfully

    I uninstalled Acrobat 8 and installed Acrobat 9.

    I checked the updates of Acrobat 9and loaded those as well.

    The Acrobat tab appears in the office applications, but nothing happens when I select Create a PDF file or one of the other selections except preferences in Acrobat.

    When I select Preferences it blocks of Word.  Word then restarts itself and said that there is a serious problem with Acrobat AddIn, I need to check updates and I would turn off.  The same goes for Excel as well.

    I tried to place C:\Program Files\Adobe\Acrobat 9.0\PDFMaker\Common\ as a reliable source, but my security settings did not allow.

    The add-in is in the Active AddIn section and does not appear in the disabled AddIn section.

    I really like this feature.  A resolution would be greatly appreciated.

    With OFFICE 2010 and AA8 AA9, you can print to the printer Adobe PDF and nothing more. For compatibility with OFFICE 2010 to PDF Maker, you must use X AA. In addition, if you are on a 64-bit computer, you may need to use the 32-bit version of OFFICE. I don't know if the last X AA is still compatible with the 64-bit version.

  • Windows Update does not work after you reinstall Windows XP SP3, get error: "the site has encountered a problem and cannot display the page you are trying to view.

    Original title: cannot run Windows Update

    I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    For self-help options:

    To support options:

    Can someone help me please?  Thank you.

    I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    For self-help options:

    To support options:

    Can someone help me please?  Thank you.

    [1] select start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

    To disable the horse notification that appears in the status bar on automatic updates is turned off.

    Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates

    [2] manually download the full install for IE8 exe and install IE8 and refuses to download updates at the time of the installation of IE8


    [3] manually download and install the latest cumulative security for IE8 update and restart the computer before

    visit windows update via the shortened link in your Start menu.

    When you have Win XP SP3 and IE8, it will be the necessary file recommend you download and save the file in the folder, and then double-click on and run the executable file from there.


    Restart after installing IE8 cumulative security update.  It should restart when installation is complete.

    [4] now to connect to windows update manually through your browser using the shortcut in the start menu link.  Ignore the warnings, recommendations to turn on automatic updates.

    Report back please on the status and please report problems with error codes. Thank you.

    Recommend you not install MSE but rather install a free antivirus like Avast or AVG.

    Recommend also you do not install Windows Search 4.0 these programs not to live pleasantly on most XP machines and cause CPU excessive loading unpredictable and inconveniently sometimes interfering with the usual ability to XP if not to multitask without problems.  Also recommend you only install Firefox is a browser much better than IE8 that will not work even at many Web sites.

  • Internet Explorer does not work after you install the kb2761451 update

    Original title: I downloaded the update and now Internet security security update kb2761451 explore does not open.  So I deleted it and Explorer opens.  This update is listed as important.  What should I do?

    The Explorer is 9.


    Thanks for posting the question in the Microsoft Community!

    Internet Explorer stops working after the update kb2761451 is installed.

    The problem may occur if the updated components are corrupted.

    I suggest you follow the steps mentioned below:

    Method 1: Of reset Windows Update components


    See the site:

    How to reset the Windows Update components?


    Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:


    Method 2: run the Update of the system analysis tool

    See the site:

    System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008


    I hope this helps. If the problem persists, let know us and we would be happy to help you.

  • Camera does not work after you reduce the screen brightness


    I have an application that uses the camera in QML. It works fine, but if the screen fades while my application is open the camera no longer until I restart the application.

    Here is the page of qml any camera:

    import bb.cascades 1.0
    import bb.cascades.multimedia 1.0
     * Most of this code was copied from:
     * https://developer.blackberry.com/cascades/documentation/design/camera/taking_a_photo_with_the_front_...
    Page {
        property string pictureLocation: ""
        function closeCamera() {
            pictureLocation = "";
            saveID.enabled = false;
        titleBar: TitleBar {
            acceptAction: ActionItem {
                title: qsTr("Save")
                id: saveID
                enabled: false
                //title: "Save"
                onTriggered: {
            // The 'Cancel' action
            dismissAction: ActionItem {
                title: "Cancel"
                onTriggered: {
                    pictureLocation = "";
        onCreationCompleted: {
            // Check to see if any cameras are currently accessible.
            if (camera.allCamerasAccessible) {
                // Open the rear camera.
                camera.isOpen = true
        Container {
            layout: DockLayout {
            // The Camera object.
            Camera {
                id: camera
                preferredWidth: 768
                preferredHeight: 1280
                objectName: "camera"
                property bool photoBeingTaken
                property bool isOpen: false
                onTouch: {
                    if (event.isDown()) {
                        if (photoBeingTaken == false) {
                            // Take a photo, and automatically
                            // save it to the file system.
                // The following are examples of slots that can
                // be used with the Camera object to handle
                // the various signals that are emitted.
                onCameraOpened: {
                    // Once the camera is open, start the viewfinder.
                onCameraOpenFailed: {
                    console.debug("Camera cannot open");
                onViewfinderStarted: {
                    console.debug("Viewfinder has been started");
                    photoBeingTaken = false;
                onViewfinderStartFailed: {
                    console.debug("Viewfinder could not be started");
                onPhotoCaptureFailed: {
                    console.debug("Photo could not be taken");
                    photoBeingTaken = false;
                onPhotoSaveFailed: {
                    console.debug("Photo could not be saved");
                    photoBeingTaken = false;
                onPhotoSaved: {
                    saveID.enabled = true;
                    photoBeingTaken = true;
                    console.debug("Photo has been successfully saved");
                    photoBeingTaken = false;
                    pictureLocation = fileName;
                    var imageName = pictureLocation.substring(pictureLocation.lastIndexOf("/") + 1);
                    var imagePath = "/accounts/1000/shared/camera/" + imageName;
                    cameraPreview.imageSource = app.getCameraPreview(imageName, imagePath);
            Container {
                layout: StackLayout {
                leftPadding: 10.0
                topPadding: 10.0
                Container {
                    preferredHeight: 200
                    preferredWidth: 200
                    horizontalAlignment: HorizontalAlignment.Left
                    Container {
                        verticalAlignment: VerticalAlignment.Center
                        ImageView {
                            id: cameraPreview
                            verticalAlignment: VerticalAlignment.Fill
                            horizontalAlignment: HorizontalAlignment.Fill
                            scalingMethod: ScalingMethod.Fill

    Thank you


    so, there is a signal of cameraResourceReleased which you can listen to that will tell you that the camera has been arrested.

    After that, you can restart the viewfinder after your application is in the foreground.

    We have a corner case that we are still working on what centers around the case when the screen starts to close (causing the camera to stop), but the user he wakes up before the browser tells your application in the background.  In this case, you may not receive a leading event.  You can probably work around this case by launching a timer and check, after a second or two, if the application has been deleted original or not... If it is still in the foreground, then you could try restart the viewfinder

    See you soon,.


  • Office Jet 7612: Scan of the computer does not work after you win 10 improvement

    One of my clients has an officejet 7612 and has improved to win 10 to win 8 and lost the "Scan to PC" features themselves the printer he used for years to create his PDF files.

    Print and scan drivers seem to work to scan and print from the computer to the printer, but the printer software that was authorized to create PDF and JPEG of the scanner and send them to the computer doesn't seem to work.

    Is there any solution for this?

    Y at - it another way easy to make PDF files or is this feature lost with the upgrade?

    Shane Valcich


    Thank you for using the HP forum.

    You can download and install the software COMPLETE features of HP printing for your operating system:


    Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

    How to scan to computer

    To scan from printer to computer, you need to install the printing software full of features first.
    Once you have installed the software,

    1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
    2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
    3. make sure that 'enable' the Scan of the computer. Also check the tab "Automatically start Scan of the computer when I connect Windows" is to check if you want to have this feature permanently. (an example is shown below)

    Hope that helps.

  • Windows Media Player 12 does not work after you choose the initial settings

    I tried to use windows media player 12 on my computer laptop windows 7 and it won't work. It worked the first time and I chose my settings, but it would not open the player itself. I tried to do it on the guest account, but it's the same thing. Does anyone know how to fix this? -Chris

    My post was actually in response to JRTLOVER:

    Why we cannot uninstall and reinstall from the CD just Media Player... or is there a way to fix this?

    I have seen that it was already proposed earlier in this topic, my apologies.

    Regarding your problem, have you tried to launch directly executable WMP? To do this, click Start, type wmplayer.exe in the search box and press ENTER.

    You should also check if WMP is already running: start the task (Ctrl + Alt + Delete) Manager, look for one or more elements called wmplayer.exe on the process tab, select each item and then click end process , then try to start WMP again.

    Tim Baets

  • USB does not work after you install the utility on Satellite A200 Intel chipsets

    I installed Win XP Pro SP2 on my Satellite A200-1SM and everything was ok until I installed Intel Chipset Software Installation Utility version (recent ones on the site of download of Toshiba; before this step all USB dev. worked properly), after all my USB devices wouldn't work. I had my windows up-to-date with updates from Microsoft, but that has not changed a thing.

    I use Vista once again, but still want to work one day at the XP operating system.

    Please help me if you can.

    Like the previous user said, the chipset must be installed as first pilot
    In addition, it seems that this laptop supports the Intel® GM965 + ICH8M Intel chip.
    It would be advisable to check the version of the Intel page directly

    Hey Buddy

  • Outlook 2003 does not work after you install the update Outlook 2007 (KB2412171) _

    I run Windows 7 and Outlook 2003 but the update automatic KB2412171 causes Outlook to crash into the opening with the message "Microsoft Outlook has stopped working" and the program must close so I'm not able to use Outlook at all.

    Please can someone help me with this.

    In these forums, you will find some support for Outlook (2003): http://social.answers.microsoft.com/Forums/en-US/category/officeoutlook ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • run as administrator does not work after you use netplwiz to change the name of the account

    Hi all

    I used netplwiz configure Auto loging in one of the accounts. While I was doing this, I changed the name of the account.
    This action was simple and easily accessible.
    However, after record change and restarting the PC, I can't use the RUN AS ADMINISTRATOR option more.
    This means that I can't install or update any program now. I also can't run netplwiz or any other installation program more so I'm not able to reverse the name change.
    The result is always the same and I can not yet take a screenshot so I took a picture: http://postimg.org/image/71lzyigwr/
    Another problem - I have only a wireless keyboard so I can't use safe mode.
    Is it possible to fix this?

    Here you:

    1. keep tapping F8 during the first phase of startup.
    2. select Repair from the menu.
    3. Select an administrator account, and then enter its password.
    4. When you are prompted, select System Restore.
    5. set Windows to a point before you changed things.
    6. Once completed, plan in advance and create, test and document a spare, even admin account that you have a spare House key. Running Windows with a single administrator account takes a lot of unnecessary risks.
  • Sound does not work after you install the update of the IDT High Definition CODEC on DV6 series laptop driver

    Hi, I have edition entertainment laptop HP Pavilion dv6 Windows 7 64 bit OS. I'm used to unsuccessfully drivers every month and everything is fine, but 3 days ago I downloaded the new IDT High Definition Audio CODEC drivers. After installing his system stops working. I tried several times to back the drivers and install them again, but in both his case has not appeared. What should I do?


    Uninstall the driver, and then install the codec Microsoft UAA before reinstalling the previous audio driver.

    Please post your results here in your thread.

    Best regards


Maybe you are looking for