Why the photos are added to the library when they shouldn't
My main photo is a folder that is accessible by Lightroom. Photos taken by my iPhone are added to my library iCloud. Every few weeks, I have export, re-import with Lightroom and then delete Photos. After deciding what to keep, etc., I import them to the pictures, but as referenced images. I noticed some strange events that some of these re-imported referenced photos are added to Photos instead of staying as referenced photos library. Today, I exported all my pictures from December to my iMac desktop computer. I imported to Lightroom by moving them to a specific folder on my HARD drive iMac. Then, I went on my page web iCloud, selected all except 12 photos and deleted. I checked the pictures, and indeed the pictures were gone. I checked my iPhone the went and then my iPad. Everything except a few stray photos disappeared from this device (do not understand my a few that had been removed from iCloud were still on iPad) I deleted these stray photos if all THE Photos on my iMac and devices showed the same thing, only 12 photos. Here are my Photos of preference settings:
My devices have these settings (iPhone has also upload photos of burst selected):
Once all this has been checked and rechecked, I imported my photos of December in Photos like referenced pictures, yet more than half of the referenced images was imported as pictures added to the photo library. I have a smart album that photos of IDs added to the library instead of referenced photos. Even some were copies of original 12 I had saved for my library of Photos at the beginning of this experience together. These photos that have been added to the photo library are now also on my devices as well as when I check my web page to iCloud. How can I keep peaks which should be referenced photos to be added if they are uploaded? Some of the "uploaded photos" are in a shared file. If this affects what happens?
Once all this has been checked and rechecked, I imported my photos of December in Photos like referenced pictures, yet more than half of the referenced images was imported as pictures added to the photo library.
Photos won't matter pictures, as if the same photo has already been imported as successful. It will use the original master file run instead, which is already in the photo library, even if the original file must be in the recently deleted album.
Make sure that you have no original managed in your library, before you try to import as a reference. The original of your managed can be created by importing through my photo stream, for example.
Tags: Mac OS & System Software
Similar Questions
-
I recently had to rebuild the computer and reinstalled the photos. I have photos imported into Lightroom, but the parameters associated with the photos, that is to say. When they were developed, are not there. How to import these?
Default LR stores all changes in the catalog file, not in the pictures. So if you have a backup of your original catalog you will need to copy on the newly rebuilt system and open it in LR. You will then need to recreate a link to the images in the catalog depending on where are your images and where the original LR catalogue think they are.
-
Why my photos are not being updated on all my devices which or login to iCloud?
Why my photos are not being updated on my iPad if all my devices are signed in iCloud?
On your iPad, tap settings > iCloud. Make sure the Photo is on.
Additionally, make sure that your iPad uses the same account as your other devices iCloud to synchronize data.
-
Windows 7 Windows Media Player 12 does not update the library when I add an item to the library, also, when I delete a file from the folder that contains the media player does not remove it from the library. Can you help me please?
Hello
For the question, you can also view the following link for more information:
You cannot view, add, or delete items in the library of Windows Media Player 11
The steps are also applicable for Windows Media Player 12.
Thank you
Mary
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I lost some of the folders in the library. They exist in the Explorer solutions, but somehow got removed from the library. I can bring them back in but I'm afraid it will happen again in LR. Please help me understand what happened and how can I prevent the recurrence. I use Win7.
A few possibilities:
1 > you click with the right button on the files and chose to remove them from Lightroom.
2 > you have created a new catalog, and records that are not part of another catalog.
Each of these scenarios seem like they could be a possibility?
-
5.7 LR "Adobe Photoshop Lightroom 64-bit has stopped working" in the library when I type "import...". »
I have 31K photos in a catalog. It's the only catalogue that I use. Recently, today I imported 84 photos on the same folder I try now to import 200 +. Adobe Epic Fail!
Delete the folder "Lightroom 5 catalog Previews.lrdata" and the folder "5 Lightroom Catalog Previews.lrdata Smart" and disconnected from my USB hub, but not my two external hard drives USB.
I import now.
Thank you Adobe for the best photographic catalogue in the world system!
-Love
Steve
http://stephenjungphotography.SmugMug.com
Live from the "capital of the world Live music."
-
This is a double post of a following:
-
You want to use applications on a computer in the library when I travel out of town. Is this possible without download on computer?
It is unlikely. You will need to download and install applications on the machine, and it is doubtful that you might infer from this ability.
-
What settings can I change my captivate program so that when a user does the program into an LMS they are marked as being completed when they hit a specific slide (not a number of slides) or the percentage of slides
I have duplicate slides that the user can jump. When they do the program is marked as progress when really, they have seen everything but technically not each slide.
I wish that the LMS to makr as complete when they consult the last slide so that they are marked as being completed independently to know if they jumped the previous slides.
Thank you. In fact, I managed to find a solution that does not require the user to press the button! You can add an action to a slide itself using Javascript execution on success. In the Script window, you add that scorm_setcompleted() and that tell of the SGA to mark the complete project on enter on this slide. So that's what to do if someone reads this
-
Where is the filter of the CC 2014 OIL paint? Why the hell would they remove?
Where is the filter of the CC 2014 OIL paint? Why the hell would they remove?
If I remember correctly, he uses the PixelBender technology and which has been abandoned.
-
Can't access my live photos of tiles at the start, even if it worked until a few weeks ago. whenever I'm on the floor, he says: "unable to find all the photos in your library. They are available in desktop under my images, but several attempts of resolution of the problem were not successful and I am very frustrated with this!
I realized how difficult Windows 8 would be to navigate, I would have changed my Apple!Pictures were also a real pain with Windows Vista like so many different programmes of production/organization etc.Any solutions would be welcome!CCFrom the desk of
Press the Windows key + R
Type WSReset.exe and press OKhttp://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
Method 3:
You can try to run Apps TroubleshooterDownload and run the troubleshooter modern UI App and check.
http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
Please use the following links as reference:
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
-
Unit testing: why white spaces are added to the PL/SQL lines on each edition?
Dear team of SQL Developer,
Are you aware of this very annoying problem of the unit test is running: a space is added to each line of PL/SQL code with each unit test that is run?
The length of each line of code continues to grow with each race...
I wonder why is it and you have an existing reference to bug for this... Please let me know...
Thank you
Val
Thank you, Gary!
The bug was just connected:
BUG 20061594 - UNIT TESTS: the UNWANTED SPACE CHARACTERS ADDED to THE SQL CODE
I've updated the SR that white spaces are added after each change, and that it can be easily mistaken for each run (we open the editor for see/check, or simply to do an update before a new race), but the bug has already been created with a description of the problem of evil:
"...
Description of the problem
===================
Spaces are added after each line of SQL in the Unit Test after each race. »
Sorry about that... I hope that the bug will be updated with correct description before you guys accept it as a bug:
"...
Description of the problem
===================
Spaces are added after each line of SQL in the Unit Test after each change. »
Thanks again,
Val
-
I am developing photos in lightroom. My photos are below the screen but the screen is lit in blue. I double click on an image to display and nothing happens. I can look in library mode, but not in the mode to develop. Can someone help me?
Hi pennym,
Please follow the steps below.
Open Lightroom
Go to Lightroom preferences in the Edit menu
Click the performance tab
Deselect the graphics processor
Restart Lightroom and try to use it
Let us know if that helps.
Kind regards
~ Mohit
-
Why my photos are taken with the iPad Pro only 72 dpi?
So I publish my own books in which I print A3 color photos... I want to use some of the pictures I took with my iPad 9.7 Pro. For all that it is supposed to be a good camera I do not see why my photos show that only 72 dpi...? I need at least 300 dpi at print, could get away with 250 + and climb later in Photoshop, but 72 is horrible. What can I do?
View the dimensions in pixels of your image, not the CIO.
DPI is just a mathematical way to express the resolution. When you say "I need 300 dpi" is only half of the formula.
300 dpi at what number of inches?
An image that is 3000 pixels on the long side (wide) could be expressed as being...
10 "wide @300 dpi (= 3000 pixels)
5 "wide @ 600 dpi (= 3000 pixels)
41.67 "wide @72 dpi. (= 3000 pixels)
Actual size of the image remain the same. By default, Photoshop to express everything at 72 dpi.
-
my photos are all on the side, they were not always this way, I have changed a setting in some way, but don't know how or what - thank you - at the same time, the records now have a blue box with a white arrow - what have I done to cause this?
Hi brt3456,
The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.
http://www.windowslivehelp.com/product.aspx?ProductID=20
For reference:
Maybe you are looking for
-
I had to reset my PC & re - install FF without first using a manual backup of bookmarks. The reset process apparently retains all data files, but does not keep Apps. I hope I can do my new Firefox to the old bookmarks file and... Hey presto... I retr
-
iMovie does not play clips from photos?
I have a movie made using iMovie 9.0.9 running El Capitan on a mini of 2014 (same problem on my Powerbook). He plays clips from photos. I can see the clips shown, but the title plays on them with a black background. If I try to open my library to see
-
HP DV2000 BASE SYSTEM DEVICE DRIVER
Install a new full OS, in Device manager, I have three yellow question mark points with the following information on the pilots. Do I need from the please and thank you InAdvance PCI VEN_1180 & DEV_0592 & SUBSYS_30B5103C & REV_OA\4 & 3A3249AB & O & B
-
I did a movie with pictures on Movie Maker and played very well. Now, it's just to show Xs red in the photos of some, but not all. What I am doing wrong?
-
My question is, have we not a software that can collect all our songs in our pc presenttt... .and play them