Why the screensaver stop working after a few minutes and then go to the black screen permanently?
I use Vista Home Premium with Explorer 8. My screensaver always works for about 5 minutes and then stops and goes to a black screen. Still black screen and my screen saver active ever again until I have move my cursor to display the page I was on. The screen saver does not available parameters except to set the number of minutes, I want to start. I ran antivirus, anti-spyware-malware etc the gamet, but anything is wrong with the screen saver. I am blocked and never had this problem before. Anyone know what is happening, what is the cause and how to fix this?
If you changed your diet plan or changed some settings for your course, it can happen.
(1) go in the bottom right of your screen and click on the battery icon and click more power options (assuming that you have a laptop. If you don't go to the control panel (Classic view) and go into power options)
(2) on your package (indicated by a blue dot next to it), click on change plan settings and navigate screen however turn it off for a long time, you want it to be before he turns off the screen.
I do not recommend messing around with drivers, because when I did, it messed up my screen and ended up back where I was before she has nothing (sorry James). of couse I messed up a little and the only real problem was the catylist control center has disappeared, and when I tried to fix this, I came across problems (it looked like a safe mode without the mode without failure of words on the corners)
Tags: Windows
Similar Questions
-
The mouse stops working after a few minutes
Original title: my USB mouse ch
My mouse stops working after a few minutes. whenever I have uninstall and re - inserts into the usb port of the computer does not recognize it.what can I do?
Hi Ann Juel,
1. what happens when you connect the USB mouse to the computer? You get the error message?
2. What is the brand and model of the computer?
3. What is the brand and model of the mouse?
4. What is the operating system installed on the computer?
We will analyze and identify the cause of the problem.
Method 1:
You can connect the mouse to another computer and check. Also perform the methods provided.
Also, try a different USB port and check.
Method 2:
Follow the link below a convenience store opened.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 3:
Check whether all settings in the mouse properties are correct or try to change the mouse settings and if it works.
Change the settings of the mouse
http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settingsHope this information helps. Response with status so that we can help you.
-
Why Lightroom stop working after a few minutes of use?
After a few minutes if through my photos, it charges constantly and become all pixelated. Boxes initially get grayed out and becomes completely unusable. I leave force LR, but it will not reopen even. The LR app will jump just constantly going up and down on my dock when you try to open. I have to restart my computer everytime I want to use LR which lasts only a few minutes before failing. This started happening since I installed the El captain.
Hi Johanna,
Please follow the link below to manually disable the graphics processor.
Let us know if that helps.
Kind regards
~ Mohit
-
Arc keyboard stops working after a few minutes of inactivity
The arc keyboard stops working after about 10-30 min to be idle. I can unplug/plug usb receiver or take out / replace batteries and still doesn't work. I have to restart the computer to make it work again. Any ideas?
Thank you
Hello
Please update us with this information.
I suggest you to update your computer with the latest version of the Microsoft IntelliType Pro for your keyboard and check if that helps.
Keyboard Microsoft IntelliType Pro 8.2 for Windows - 32 bit software
http://www.Microsoft.com/en-US/Download/details.aspx?ID=26949
Keyboard Microsoft IntelliType Pro 8.2 for Windows - 64 bit software
http://www.Microsoft.com/en-US/Download/details.aspx?ID=26950
Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.
Thank you.
-
Satellite L350D works for a few minutes and then stop completely
Hi all!
I'm having a weird problem with my laptop Satellite L350D-216
I have used for a long time in a row and is starting to show some strange vertical lines on the screen and the kind of activity let go and then it went completely black
Since then if I disconnect and leave it for a few hours switches normally and work for 5/10 minutes and turns black again.
It happens after I worked on it for about 20 hours straight or Yes (can be linked)What I tried:
-Turn on with battery only
-Turn on only with the ca
-Remove all and to hold off key for 1 min and then try again the two aboveWhen it comes on everything seems to work 100% without problem but don't lasts no more than 10 minutes as I said
Any ideas?
Thanks in advanceI can't say for sure, but the problem may be material high temperature. Satellite L350D is not the latest model cell phone and if you use enough difficult I guess laptop is full of dust and cannot be properly cooled.
Maybe the laptop needs to be cleaned.
> When it lights up everything seems to be working 100% without problem, but does not last more than 10 minutes as I said
One more thing: do the quick test. Start your laptop and enter the BIOS settings. Leave it for a while and check if the same thing will happen again.Please post comments.
-
I can't understand how to activate a screen saver. I would like it to go to sleep after 20 minutes of not used.
Hello
To activate the screen saver, right click on the desktop and click personalize and then screen saver
Go to control panel-> hardware and sound-> power options
Then click on change when computer sleeps
We can see an option to put the computer to sleep, select 20 minutes (on battery and plugged in) and click on save changes
Good luck
-
Satellite L300D-135 - some keys stop working after a few minutes
Satellite L300D-135 (PSLC8E-02P013EN) portable model, boot cold keyboard is fine. As things warm up the keys R and there stop responding as do 7890 keys. May be heat related.
The keyboard has been replaced, old and new are doing the same thing, so it's more like a controller issue. Have flashed the latest BIOS as saw talk of the keyboard problems in one of the versions of the BIOS. The end user has been tolerated for a few months, but now, Dyslexic child needs to use the laptop and cannot deal with dead keys.
Any ideas? Laptop is 2 weeks out of warranty and user end just asked me to take a peek, problem has been around for the warranty period.
Phil
Hi Phil
Can you notice the question even if you connect an external keyboard or this only happens with an intern?
I can t imagine it has something to do with the heat, but if you want you can clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.
If this isn't the case, you must replace the entire keyboard. Normally it of not so expensive so Don t you worry not about it. You can also ask your ASP if they can repair as a gesture of goodwill.
-
Satellite L750 - internal speaker stopped working after a few minutes of use
Hello
Sorry, but I had to use pastebin because when I want to post, the site send me '403 response Code '...
This is my problem:
https://pastebin.com/aaLdCxju
Does anyone have an idea on how to fix this?Any help would be appreciated
Satellite L750 - 1 H 3
Have you tried to ask for help on the forums of Linux?
-
I have a Lenovo desktop and mice. I did not have this problem with other programs.
Something strange, that.
Please report your last post as solved while others will know.
-
Relatively new MacBook OSX El Cap 11.4
My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?
Please see recommended settings of WiFi routers and access Apple points.
Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.
Some third party routers have advanced that you may need to change the settings:
The encryption algorithm must be AES.
The group key interval must be 3200.
I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.
-
AERO Peek stopped working after a few adjustments with HP to get my Photosmart printer to work
I just upgraded a fairly new computer of mine from Vista to Windows 7 Professional. The upgarde went well however the AERO Peek stopped working after a few adjustments with HP to get my Photosmart printer to work. I tried to make the show thumbnails of running programs to display in the taskbar with no luck. Any suggestions?
Hi Lisa52465,
(Already responded to dadams26 in a separate thread and it fixed the problem beautifully).
Have you tried to run the Aero Troubleshooter? If this is not the case, try this:
1. open the control panel
2. go in the system and security category
3. go to the Center of the Action
4. click on the link to solve common computer problems
5. click on appearance and personalization
6. Select Aero
He must either correct the errors problem or the State to determine the cause.
If the Aero Troubleshooter is not the thing, maybe it's just that the Aero feature has been disabled by the update. Try this:
1. right click on the desktop
2 select Customize
3. Select an Aero theme
4 see if previews back
Just for the record, could you let us know if any of the suggested fixes works (and which). If you still have problems after trying the above, could you please come back with more details (if possible).
> This answer help? If so, would you please click the green button to Vote as helpful to help future visitors encounter the same problem.
All the best,
Sharon
Sharon Roffey
Queensland, Australia -
"First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.
I use a Lenovo T440p with Intel Core i5 @2 laptopp. 60 GHz, 8 GB of RAM. Windows 7 64-bit with Service Pack 1. Intel HD 4600 graphics card. All the drivers are up to date.
All other non - CC Adobe video editing programs work.
Help, please. Thank you.
Dennis,
Changing the video rendering engine should have solved the problem. Is it still pending?
Thank you
Regalo
-
Satellite P10 554 stops after a few minutes and I can not restart
Hello
I hope someone can help me with my satellite P10 554
When I start the laptop, everything is working fine a few minutes. the monitor turns black and the books suddenly stops. I can't restart, when I push the Start button, nothing happens.I have to wait about an hour and then I the starts again, but it works for a few minutes and stops again!
Help me please, cause I need my phone to work!
Hello
From your description, I think your device overheat and go down because he cannot be cooled properly. P 10 satellite is older and it's time to clean up. You can't imagine how much dust inside the unit you will find.
I put t know how are you familiar with this, but if you have no experience don t do it alone.
-
Hi my hp vista shortcuts stopped working after uninstaling google crome and google earth
Hi my hp vista shortcuts stopped working after uninstaling google crome and google earth then reinstald google earth without crome
Hi my hp vista shortcuts stopped working after uninstaling google crome and google earth then reinstald google earth without crome
Restore explorer.exe...
Right-click on an open space of the taskbar > Task Manager > Procesess tab, right-click on explorer.exe > click on end process > Applications tab > new task... > in the Open box, type explorer.exe > Ok
Is back to normal desktop icons/shortcuts?
-
I left by mistake a USB in the port when I restarted my computer (Windows 7).
Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.
If I press ESC during startup and access the start menu, something marked WED... is highlighted and I press on enter and it starts normally.
How can I get Windows 7 to do a normal boot without having to access the Boot Menu each time?
Thank you.
Tried that, but it did not work. Finally got and IT guy come and it took him 3 1/2 hours to repair.
Need a bootable floppy which has then repairs itself.
Lesson learned. Have an available for each computer startup disk.
Maybe you are looking for
-
I am actually having a problem with my microphone, reading distorts my voice with a kind of chipmunk... So I'm trying to update Windows, but it won't let me install Windows Live Update because: "You already have building different flavor of Windows L
-
Get 80070673 and 80070663 error codes
I have Windows Vista Home Premium and have tried to install Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86 and update for .NET Framework 3.5 Service Pack 1 for .NET Framework Assistant 1.0 x 86 (K
-
I have a security lock placed on a page that I need equifax security. It is encrypted. What should I do to remove the safety lock?
-
Hi all I had this problem with my X 61 lately. Full charge, unplug the adapter, after using about 70% of the battery meter, then all of a sudden the computer goes to sleep. When HP, it only shows 2% left. Battery is 14 months old, no chance I could g
-
Weird icon on my home screen blackBerry Smartphones... someone help!
Hello... I have the torch 9810 and I just got an icon appears at the top of the screen where the voicemail and other message notifications show. This icon, I've never seen before, and that is a black circle with a white arrow in it without a red ast