Why the thre 2 network connections

Similar Questions

• Why the control panel network connections window does not show my active network connections.

  There is nothing visible in the network connections window. I still have full internet access.

  Hi GarryKerluke,

  1. Did you the latest changes on the computer?
  2. What is the type of internet connection you use?
  3. You have security software installed on the computer?
  4. When was the last time it was working fine?

  See the Microsoft article below and check if it helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• Get rid of the current wireless network connection so that I can set up a new connection using the same IP address.

  Here's my problem: I got a new computer and a wireless network connection has been set up and I could get on the internet. My daughter then wanted to try her new computer and somehow his computer is defined as the network and I can no longer connect to the internet via my computer.

  The second part of my problem is that when I try to configure my computer, I get the message that I need to go to the Micro knowledge base and article 871122.
  I did it.  By following the instructions for Windows configure my wireless, I get as far as the stage of network connections - go to change the settings for this network connection.  It is said that I had to go to the wireless network tab.  There is no tab wireless network I can say to use Windows to configure my network connections...

  I know it is long, but can someone help.  I use Windows XP Prof 2002 with service pack 3 version. Thank you adpotate

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• How can I remove the Administrative Tools, network connections, printers & Fax and scanners and cameras my desktop icons?

  Recently, I installed a trial version of Tune Up Utilities 2009. During one of the scans/tune-ups, he gave me the option to display the Administrative Tools, network connections, printers & Fax and Scanners & cameras icons on my desktop. I checked ok, however, now, I think it's too crowded in my office and you want to remove them... right on the desktop, not everywhere else they are located. I tried everything I know to remove them without success. Anyone knows where is the menu option to display on the desktop so I can uncheck or choose Delete? I don't want to have to change all the .ini files or .bat to because I'm afraid I don't do it correctly and create other problems.

  Hello tellis1230

  I don't know what you have tried, but have a look here

  Right-click Desktop-desktop/properties/Office/Customization

  Uncheck what you don't want

  .

• I can't get the wireless connection appears on the list__ of 'network connections '.

  Only, I had to reformat my Latitude D31 and don't know how to do the wireless network connection appears on the list of network connections.  The without line is turned on and the router works.

  On a relative (sort of) topic, before reformat, I got a blue screen that says since more memory was used that was installed, there was no memory for something else.  The computer is running (I reinstalled Windows XP, but in Setup the message still arrives.  Is this normal?

  Hello

  Old laptops use to come with very little memory.  Since then, software exceed the amount of memory installed

  Check the amount of memory you have and see if you can upgrade.

  You can find and expanded manual on Dell' support for the laptop.

  Regarding the wireless.

  It is possible that the wireless card is not operational and need to reinstall drivers.

  Maybe this can help.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  -Jack MVP-networking. EZLAN.NET

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Windows 7 - why the priority of network adapter is ignored when you are connected to the area on a lower priority NIC?

  I have two network cards installed on my laptop.  I wanted to test and see how Windows 7 Ultimate managed the priority of the network adapters so I connected to a small Internet (NIC B) router, and the other on my domain (NIC A).
  First of all, it was a pain to find network adapter priority.  After some research and fun Google I found this.  Unfortunately, the search bar has not helped.
  Control Panel-> network and Internet-> view network status and tasks-> to modify the adapter-> Hold down 'alt' to bring up the menu "File"-> select 'Advanced'-> select 'Advanced settings' in the menu drop-down-> adjust your priorities of the adapter in the 'Advanced settings' window, under the tab "maps and links.

  With "B NIC", defined as the highest priority, I tried to browse the internet.  It was impossible to travel.  Then I disabled 'NIC A' (the NIC domain) and I can browse the internet.  Windows XP he handled this much better.

  Select 'NIC A', and then check 'NIC B' is the highest priority.  Then try tracert on www.google.com.  It refreshes my domain as the first hop router.  It seems to be completely ignoring 'NIC B', unless I have disable 'NIC A' completely.

  In case someone of another Vienna here, looking for the answer to this, as I did, I thought that putting the real solution to this question.  Many web pages say to change the priority of going on network connections and change the order there to what you like.  You don't have to bother with this setting.

  It does not work. He has apparently no effect on the use of connections.

  What Windows actually uses is the metric value for network connections.  The lowest metric value is tried first.  In my case, I have a connection broadband shabby home, but I can attach wireless on my phone for occasional good bandwidth.  So, I want to always use the connected wireless and ignore the wired connection, but still the chance to printers and other things on my network cable at the same time.  I want to keep both on and not to disable the wired when I use my phone.

  To resolve this problem for real, go to and right click your Wi-wired adapters and one at a time to change the properties.  Select IPv4, click and then .  For each of them, disable the "Automatic metric" checkbox and set the metric value manually.  I put the wireless cable and 1-2, which gave me the behavior I wanted.

  The Automatic metric is defined by Windows based on the speed of connection and a wired connection is generally faster than a wireless one.

• Windows Vista continues to try to connect to the VirtualProfile in network connections.

  I was helping my brother set up its new Netgear Wireless USB adapter in Windows Vista and kept running into the same problem.  Once the adapter has been installed, Vista would continue to try to connect to a VirtualProfile under network connections which would interfere with the connection of the profile.  I had my brother take the VirtualProfile and then it connected correctly.  However, after each reboot, the connection of VirtualProfile appears every time and we need to start over the process.  A way to remove this VirtualProfile permanently and why what is happening?  Thanks for any input.

  original title: Wireless Virtual Network profile

  Hello Flash4,

  Thank you for choosing Microsoft answers forum for Windows Vista.

  I suggest you go to your network card making and download / install the latest drivers.

  Also I suggest that you check your system for corrupted files. You use the tool (SFC.exe) System File Checker to check and repair corrupt system files. To do this, follow these steps:

  1. open an elevated command prompt.

  2. to do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
   
  3. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Hope this information is useful.

  Thank you.

• Change the amount of vCPU in vCD deletes the virtual machine network connection in vCenter

  
  It is a problem of crazy that we discovered, and I wanted to know if anyone had seen him.

  First of all, we miss the following software versions:

  vCD: 5.1.1.867405

  vCenter: 5.0.0 Build 913577

  ESXi: 5.0.0 build 1024429

  If you go to vCloud Director and change the material properties of an existing virtual machine (Powered off) any change in the amount of vCPU (to something new), inside of vCenter status of the network will change to the port group Standard (inactive) none.

  
  Even if, before making the change, the virtual machine is connected to a distributed port group, and works well.

  We now display an SR to VMware, but sometimes it is worth running this by the community to see if other people have already seen or indeed want to test on their deployment.

  
  Thanks in advance

  We have solved the problem now.

  The reason why that we faced this problem is because we used the wrong order in the API.

  You must ensure that you use the undeploy command when you work with the vCD API otherwise you end up with a disconnected network card.

• Helps the open WIFI network connection

  Hello

  I have a new dash of Sony that I connect to my wifi to work. The network itself is open, however once your device is connected to WIFI, once you open a browser window on your computer/Tablet/phone is where it asks you your work credentials (name of user/pass). Once you submit you can go anywhere. I've seen this at other places with band wifi open, but you must accept the terms and conditions of the first time you open a browser window. Does anyone know how after you connect to the wifi network I would be able to enter my credentials on the dashboard? Since it is not exactly a web browser I know.

  Thank you!

  Hello

  Credentials of the user to connect to the Wi - Fi network can be entered into the dash unit.

• Error when opening file reader pen "the driver or network connection that the shortcut 'Target.lnk' refers to is unavailable. Make sure the disk is properly inserted or the network is available, and then try again. »

  Original title: during opening of pen drive file to msg "the drive or network that all connection 'refers to mpr shortcut' folders.lnk all in unavailable.make that the disk is properly inserted or the network is available and then try again."

  OS:-xp sp2

  pen drive :-transcend

  earlier, my USB had worms, bt Finally I took it off my ESET internet security (fully updated).

  BT still records are transformed into shortcut of 1 kb. and makes me worried coz I m nt able to open these files... Please help me out of this problem... I need my data, its urgent.help me as soon as possible to change these documents in their original format.

  my folders have files .doc, some do' report.unfortunately not have a backup of these files.

  target location: Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN

  In the location target properties are even 4 all records

  Clinical target:-H:\Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN\73mrVQz9rDByh9hfKJ9v0lt5z3m0s5hP0l.exe real sheet.xls

  What exactly is...

  I ve deleted the worms... checked by ESET, CLAMWIN PORTABLE, lapi ny window 7 WINDOW DEFENDER friend.

  ESET that worms have been Win32/AutoRun.VB.UG.Worm.

  now, I ve you gave details d, should know the problem I ve.i believe.help me

  Thank you for your time, but I did nt get the solution everywhere so formatted, it

• the REACTIVATION of network connection

  Once agine Microsoft did something so simple, so difficult.

  While in safe mode if the network connection has been disabled by the user is possible (in any case) to re - enable this? If you try this find yull its almost impossible to get back online. If someone knows how this could you please post and let me know.

  Thank you

  IV finally restarted my connection. Seems that Vista network Shell was the answer here. Using commands through 'Run' with netsh.exe did the trick.

  Thank you guys for the answers here. Now everythings normal.

• The laptop has network connection limited (DNS may be unavailable)

  There is a server on my intranet, which has a total of five users. The server is played wireless through the gateway. The bridge also has two printers and a router plugged into it. The router is necessary because there are not enough ports on the bridge for all necessary cable connections. A fiver users is plugged into the router so that it both (either the server and a user) have a wired connection (this is necessary because of special circumstances). One of wireless users was able to connect after configuration of the router. The user encounter this problem is a laptop running Windows 7 x 64. See the Wi - Fi network as limited. Diagnosis is by saying that the DNS can be unavailable. How can I solve this problem without potentially interfering with the connectivity of the other user?

  P.S. I didn't want to find a similar question to this one buried in the forums somewhere.

  To solve the problem, I have disabled the DHCP disabled the DNS server, and then set the address IP of the router should match that of the entry door. Once the computer restarts, all network related issues have been resolved.

• I accidentally deleted the setting wireless network connection icon, please help the change adapter

  I have Toshiba satellite A 505 S6989

  I accidentally deleted "Wireless Network Connection" icon of "changing the adapter setting" (network & sharing Center) while she was to allow...

  I have driver installed several times but he forces back...
  Also checked... but under the network adapter, Device Manager is showing only realtek ethernet... no wifi

  Please tell us how to get back this icon so that I can connect via wifi...

  Please answer as soon as possible
  concerning
  Afonso

  I solved the problem a few days before, sorry for the late response...

  WiFi card was detached from this place (it was a hardware issue)

  I opened my laptop and re placed this wifi card.

  now it works fine

  Thank you