Why the Wired Optical mouse does not turn on my computer?

Similar Questions

• Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Hi Mary,

  Did you install all the necessary drivers, firmware and/or software Intellisoft of the mouse and then restart?

  You have good batteries in the mouse?

  Verify that the mouse is compatible with working computer and your operating system?

  Have you checked the mouse icon in the control panel (after all of the above) to a setting to activate?

  Contact the vendor of your computer and see if you need to update something else.  When I installed my wireless mouse, it wouldn't work until I updated the touchpad, the firmware drivers and.

  Good luck!

  Kosh

• Arc touch mouse does not turn off

  Hello

  I bought the Microsoft Arc touch mouse and used it for the past 6 months and recently I started having problems. What is flip the mouse when not in use, it is not turned off and consume the battery. Please help solve the problem or let me know what I should do

  Hi Viard,

  Thanks for posting your query in the Microsoft Community Forums!

  From the description of the problem, it seems that the Arc touch mouse is not turning off when it is not in use.

  I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

  -Don't you make changes on the computer before this problem?

  Try these methods and check:

  Method 1
  You can try the steps from the following link and check if it works:
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

  Method 2:
  You can try the steps from the following link and check if it works:
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  Also check out the following link:
  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Why the Polish support page does not work?

  Why the Polish support page does not work?

  http://PL.consumer.Toshiba.EU/PL/support/home/support_home?

  I think the error message is pretty clear:

  + Service temporarily unavailable +.
  + The server is temporarily unable to process your request due to downtime or maintenance capacity problems. Please try again later. +

• Why the button "Save as" does not work in new Acrobat Reader? Very annoying...

  Why the button "Save as" does not work in new Acrobat Reader? Very annoying...

  I have already updated to the last DC v15.009.20077...

  So I found a way, if I do it just right, it works (with the file, click the "tiny" file and then save as. I made the mistake of first pressing the home much more first. Really not intuitive or easy to use even if... Looks like you have replaced the button "save under" with the "save in the cloud." We use mettle at work, and the cloud of Adobe is irrelevant for me...

• Why the "vertical-align" argument does not work?

  Very often, I try to use the "vertical-align" argument to control the CSS formatting, but so far he has never worked, so I had to resolve the situation by specifying values for margin...

  Why the "vertical-align" argument does not work in CSS?

  Alternatives?

  For your reading pleasure.

  http://phrogz.NET/CSS/vertical-align/index.html

  Gary

• New mini optical mouse does not work

  Hi all:

  I used a mini mouse optical for a few years now without a single problem. I just plugged into the USB port, and that's all. Yesterday it died on me, so I bought a new.

  The mouse does not work and the cursor stays frozen at least that I move it using the touchpad on the laptop.

  OS is Vista
  Satellite P100 series

  More information:

  -the little wheel on the mouse will allow me to scroll the page to the bottom, but it's just what works
  -the drivers are all up to date
  -restore the computer to an earlier date
  -run a full virus/malware scan, nothing came
  -USB are good; I tried all ports, including the ports where something else that works has been connected
  -After I restore and connect my mouse in I saw the computer install the latest drivers

  The only thing I can think is that the new mouse is defective but I doubt that. However, it is possible I suppose.

  Can anyone else think of any other possible explanation and how I can solve this problem. Could something changed in the BIOS? Is there a setting that has changed I have to look?

  Thanks for sharing this with us!

• Why the Satellite L650-116 does not appear on the list of products?

  Why my notebook l650-116 does not appear on the list of products?
  It does not appear even with the auto detects the program located on the site.

  Hello

  I put t know what you mean?
  SATELLITE L650-116 is a European model for Toshiba laptop. But this L650-116 has been published for example in Cyprus.
  You can find the details on the Toshiba Cyprus page
  http://Toshiba.com.cy/pages/en/toshiba_products/laptops/satellite.php?prod=197&cat=2

  In addition the L650-116 belongs to the PSK1JE series if you need drivers, you must choose L650 PSK1JE

  Welcome them

• the Lenovo g500 mouse does not work after the upgrade to windows 8.1

  I recently upgraded my g500 windows 8 for winows to 8.1. But ever since then, my mouse does not work and the keyboard works only after standby. I tried to restore the default settings, but that didn't help. What can I do to fix this?

  Hello

  If the system is still under warranty,

  I suggest that to call a repairman,

  If this isn't the case, you can try to check the keyboard and the Touchpad connection.

  You can consult this service manual

  http://download.Lenovo.com/consumer/mobiles_pub/lenovo_g400g500g405g505g410g510_hmm.PDF

  Hope this helps

  See you soon!

• My arc touch mouse does not turn off

  Hi I bought my touch mouse arc less than a year ago.  Things worked well, until today, when my mouse will not turn when I flatten it.  No other problems with it.  Is it a hardware problem or software? The unit was not fallen or exposed to difficult conditions.  I bought the camera from amazon.com in the United States during my visit last year, but I live in the Philippines.  Is the unit under warranty here in our country? Or do I have to go to the United States for repair or replacement if/when necessary? Thank you!

  Hello

  I suggest you to contact center of material for a better support.

  MATERIAL

  http://www.Microsoft.com/hardware/en-in/p/arc-touch-mouse#support

  Contact us

  http://www.Microsoft.com/hardware/en-in/support/contact-us

• Why the length of film does not change when I remove Vista Movie Maker clips?

  You have not answered my other question.  I get an error "does not fit" when you publish a movie on dvd. I deleted half the clips in the storyboard and length does not change. I always get the error "will not fit". After I saved the project. It seems that it becomes the length of the imported clips not what is in the table of Storyboard. The length of the table of Storyboard is only 01:30, but the length in the window shows 02:42 that is causing the error. It seems to me that it should use the length of the table of Storyboard because it's what makes the final video on dvd.

  Yes... adding or removing items from the timeline should change the duration of the project.
  The files in your component collections have no effect on the duration of the project.

  I suggested that you publish in the movie .wmv format to see if the version with clips
  removed would still last for 02:42.

  As I have said from the beginning... creating several small projects may be your solution.

  I'm sorry that my suggestions seem redundant to you. Perhaps you could find assistance elsewhare.
  There is a forum dedicated to Movie Maker on the following link:

  Windows Movie Maker Forums
  http://www.windowsmoviemakers.NET/forums/

• The Aero Peek feature does not work on my computer that I've recently upgraded to the version of Win 7 Home Premium 32 bit.

  After you have installed Windows 7 Home premium, I noticed that the aero peek feature does not systematically after a fresh reboot upward. Sometimes when I turn on my computer the aero peek feature turns on immediately and works well. On other occasions when I turn it on it just does not come to the top. I had the box customize and found the checked enable aero peek. Still aero peek doesn't work. So to summarize if aero peek turns on it works fine. However, it does not illuminate whenever I boot my machine eventhough that the box is checked. Please notify.

  Try this: launch REGEDIT, navigate to HKEY_CURRENT_USER and make sure that EnableAeroPeek is set to 1, rather than 0.
  It can help.

• My Microsoft Wireless Optical Mouse does not communicate with the Transceiver.

  After the return from a road trip, I plugged my Miccrosoft wireless optical mouse and keyboard. At first, communicate with my Toshiba Satellite laptop, but the keyboard now works. The mouse works sporadically if I push the reset button on the Transceiver and he travels the three lights. When I check the State of the mouse, it shows good batteries (I replaced the still) and the right signal. The computer apparently see the mouse, but somehow the orders do not get through the ARVA. Any ideas?

  Hi Peter,.

  What is the model number of the Microsoft Wireless Optical mouse?

  I suggest you try to connect the transceiver to another port. Then check the behavior of the device. By trying the receiver on a different port, you can eliminate all the problems affecting the port itself.

  You can access the links below and follow the steps described in section troubleshooting problem mouse Microsoft Wireless on your computer and check to see if it helps you solve the problem.

  http://support.Microsoft.com/kb/838398

  http://support.Microsoft.com/kb/321122/en-us

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why the new cRIO-9076 does not support the scanning engine?

  I spec'd a new chassis cRIO-9076 spiffy but learned that, despite its impressive capabilities, it does not support the analytical engine.

  I'm curious as to why this is.  I hope that this is not an indication of support OR away from the scan engine and perhaps NSV technology as well.

  OK, uninstalled and reinstalled OR RIO 4.0 and now all is well, guess it was just one of those inexplicable installation problems.

• Why the Age of Mythology does not work on Windows 7?

  I just installed Age of Mythology on Windows 7 RC, when I start the game it says: the application could not start correctly (0xc0000005).
  I tried to run with compatibility for Windows xp sp1 & sp2 and Windows Vista sp1 & 2, but it still does not, beside that works great on windows xp.
  I looked in google for a solution, but all I found is that everyone says he's working on Windows 7.
  So, I need your help please.
  Thank you

  Hello Adams-PC,

  Please use the Forums for Microsoft Windows.

  I show the requirments system for this game are as below.  I suggest to go to the link below and selecting contact us to check if this game is compatible with Windows 7.  I have also included a link below for support with Windows 7, which is where I would suggest to go for the management of this problem.  Thank you!

  The system configuration required

  Microsoft® Windows® 98/Me/XP/2000 PC with 450 MHz equivalent or higher processor 128 MB of system RAM 1.5 GB of available disk space 32 x speed or more fast CD-ROM drive Required 16 MB video card Sound card, speakers or headphones required for audio Microsoft mouse or compatible pointing device 56.6 kbps or better modem to play online http://support.Microsoft.com/?PR=GMS

  Forum Windows 7:
  http://social.technet.microsoft.com/Forums/en/category/w7itpro, windowsvistaitpro, windowsxpitpro / Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.