Why this screen always here in my code?

protected Boolean touchEvent (TouchEvent message) {}

if (message.getEvent () is TouchEvent.UNCLICK) {
invokeLater (new Runnable() {}
public void run() {}
final int listField.getSelectedIndex () = selectedIndex;
if (selectedIndex == 0) {
pushModalScreen (new NameInputScreen());

updateDisplay();

}

//+****************************************************************************

Look here please... Why is the NameInputScreen still visible here?

//

//******************************************************************************

try {

Thread.Sleep (5000);

} catch (InterruptedException e) {}

Generative TODO catch block

e.printStackTrace ();

}

/**

new admission ( )

(ListField.get) (AufnahmeSettings)

listField,

selectedIndex));

**/

}

});

return true;
} else {}
return Super.touchEvent (message);

}

}

Stept through it in the debugger and decided to accept this isn't style CLDC. Capitulated.

Tags: BlackBerry Developers

Similar Questions

  • Can someone explain why this code is not overwrite another file on the sd card?

    I use a table of bitmap with a few different images. According to a trigger, I want to change the wallpaper of the home screen blackberry in the image of my choice. I can do that for 1 single image, it is not updated while it should be. Here is my code, help! :

    * Note [D.kF] is an array of Bitmap

    * D.bgNumber evolves according to the program (that is to say, it takes a different image)

    Card graphics graphics = Graphics.create (D.kF [D.bgNumber]);

    Encoder JPEGEncodedImage = JPEGEncodedImage.encode(D.kF[D.bgNumber],100);
    try {}
    ExtendedFileConnection fconn = (ExtendedFileConnection) connector
    .the ("file:///store/home/user/pictures/image.jpg",
    Connector.READ_WRITE);
    fconn.enableDRMForwardLock ();
    {if(!fconn.) Exists())}
    fconn. Create();
    }
    OutputStream os = fconn.openOutputStream ();
    OS. Write (Encoder.GetData ());
    OS. Close();
    fconn. Close();
    } catch (Exception e) {}
    System.out.println ("output file error:" + e.getMessage ());
    }

    HomeScreen.setBackgroundImage("file:///store/home/user/pictures/image.jpg");

    Sorry, I borrowed this code for my own purposes, so I'm quite foggy as to its functions. I have just made a run through in the Simulator and noticed that the image has been "locked" in the actual file. He says DRM Forward Lock. Now I read a little about it and I thought it was a necessary element of this encoding.

    In any case, I reduced on the line of lock forward and his now appear correctly as the home screen. So I guess its resolved, but, you, what is the purpose of the lock?

  • Help, please! Why this code work in 6i form and does not work in forms 11g

    I tried to fix this thing for weeks and for some reason that I can't understand how to operate.

    Here are the error codes I get:

    FRM-41219: can not find the report: invalid ID (this pop on the screen I then click on the ok button the next show at the bottom of the screen)

    FRM-40738: Argument 1 of builtin RUN_REPORT_OBJECT cannot be null

    Basically, this code is supposed to call a report that puts another screen pop up and display the report.

    Here is the code behind the button on the form "File Print".

    :OVERALL. THE_NUMBER: =: REQUEST_SEQUENCE;

    IF : REQUEST_AMOUNT<100000 THEN : TEXT_ITEM83: =: request_amount;

    ELSIF : REQUEST_AMOUNT> THEN 1000000 : TEXT_ITEM83: =1;   / * I think the ELSIF should be replaced with ELSE IF don't know * /.

    END IF;

    : TEXT_ITEM74: =:GLOBAL. THE_NUMBER;

    THE_REP;

    Here is the code that is behind the box of quere.

    Start

    : global .qry_rep_val: =: quy_rep;

    : display_item78: =: global .qry_rep_val;

    If: global .qry_rep_val = '3' then null;

    elsif: global .qry_rep_val = 1 then

    run_vba_rep1;

    elsif: global .qry_rep_val = 2 then

    run_report_for_last_query;

    elsif: global.qry_rep_val = 4 then / * Yes, there is an extra space between the two, the 'val' and '='. Should I delete TI * /.

    Call the form ('/ export/home/oracle/Middleware/Oracle_FRHome1/forms/vba_tda_qry ', HIDE, NO_REPLACE, QUERY_ONLY);

    end if;

    : qry_rep: = 3;

    end;

    I guess that the problem is in the run_report_for_last_query procedure. There will be something like run_report_object. Could you post this code?

  • I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

    I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

    Hi Kerrkid90,

    Welcome to the Microsoft Answers Community Forum site!

    To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game

    2. run the setup.exe file

    3. right-click on it and run as administrator.

    If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:

    http://support.Microsoft.com/kb/290301

    In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:

    http://forums.aeriagames.com/?f=6

    I hope this helps!

    Thank you best regards &,.

    Calogero - Microsoft technical support.
    Visit our Microsoft answers feedback Forum
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  • Windows Live account Security Code this 1 here is the code you requested: 2560007, second 6292048

    IM receiving this message twice

    Windows Live account Security Code this 1 here is the code you requested: 2560007, second 6292048

    Hello

    The question you have posted is better suited in the Windows Live community forums. Please visit the link below for any further assistance.

    http://windowslivehelp.com/

  • Black screen - try to activate the controller PCI of communication Simple: the drivers for this device are not installed. (Code 28)

    Original title: Safe Mode

    Can run my computer only in Safe Mode, whenever I try to boot into normal mode I get a screen with lines on the subject. Cannot download even the peak "white screen" now.

    Any help will be greatly appreciated. Thank you.

    New: I get his message when trying to activate the controller PCI of communication Simple:

    "Windows has enabled this device, however, this device still does not work correctly."

    Then:

    The drivers for this device are not installed. (Code 28)

    To reinstall the drivers for this device, click on reinstall.

    Then:

    "Windows cannot find the driver for your device".

    Get you the drivers accessing a site Web on your computer or the manufacturer of the graphics card > Search a drivers and download article > search your computer or your graphics card model number > your operating system > drivers for it: either video / graphic / Chipset (according to the label)

    See you soon.

  • Mode Code of Dreamweaver is very difficult to read, as it has degraded. It was easy to read. Clues as to why this has past and how to fix it? Thank you very much!

    Mode Code of Dreamweaver is very difficult to read, as it has degraded. It was easy to read. Clues as to why this has past and how to fix it? Thank you very much!

    Did you receive a Windows security update recently?

    See this thread:

    Pixelated text

    The last Windows Update published February 11 has caused my Courier New fonts to corrupt.

    Nancy O.

  • Why this code give me duplicate data

    HII, all the
    Why this code give me duplicate data
    SELECT (G.NAME_1 ||' '||G.NAME_2||' '||G.NAME_3||' '||G.NAME_4) AS NAME,
                  R.RES_NUM
    FROM    GUST G , RESERVATION R,ROOM_DETAILS S,ROOMS RR
    WHERE   G.RES_NUM = R.RES_NUM
    AND     R.RES_NUM = S.RES_NUM
    AND     RR.OCCUPIED = 'Y'
    RES_NUM
    --------
    1282
    1282
    1282
    1282
    1280
    1280
    1280
    1280
    1281
    1281
    1281
    1281
    1310
    1310
    1310
    1310
    
    16 rows selected

    Try this:

    SELECT DISTINCT (G.NAME_1 ||' '||G.NAME_2||' '||G.NAME_3||' '||G.NAME_4) AS NAME,
                  R.RES_NUM
    FROM    GUST G , RESERVATION R,ROOM_DETAILS S,ROOMS RR
    WHERE   G.RES_NUM = R.RES_NUM
    AND       R.RES_NUM = S.RES_NUM
    AND       RR.OCCUPIED = 'Y'
    
  • Why must I always be the msg "firefox prevented this page automatically reload ' still showing on my home page.

    Firefox will not automatically update my home page, this msg always appears at the top of the window.

    This msg appears every time I open Firefox.

    Thank you very much. It started just happening once I had installed Windows 7 and I found this extremely annoying as I was clicking the button authorize every time.

  • A30 - why my laptop always automatically stop?

    I don't know why my laptop always automatically closed especially when I'm on the internet or using other software. If I'm just using the laptop to watch DVDs or a Word, everything is ok.

    Boring!

    My laptop is Satellite A30

    Who can give me some advice about this, thank you!

    Hello

    you have a footstool of antivirus software to check if it's a virus?

    You see a blue front screen of the laptop closed?
    When it stops, it's closed windows and close without problem or is it simple to?

    When your laptop is used, it is on a surfboard ridig or do you use it on a couch or bed?

    Tok Bye

  • Blank screen, no beeps or error codes.

    HI I have a HP 2000 nopebook PC and its gives me a black screen no beeps or error codes. I can hear the sounds of start-up and see the screen illuminates upward and then darkens. When I plug in an external moniter happens.  I tested the memory, the inverter, I tried to drain the battery and even tried to update the graphics card and still nothing.

    Help, please!

    Yes! You are right. The laptop did work normal without any problems, but your laptop screen has gone bad and needs a replacement. HP will provide a screen for your laptop of replacement if warranty is active, you can check your warranty here to check the status

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

    I HAV these two errors in my drivers and windows cannot update, can any body healp me?

    Hello

    What devices are - if you can not tell what is the name, then you can specify the category of
    Device Manager - or both?

    --------------------------------------------------------------------------------------------------------------------

    This device is not present, is not working properly or is not all its drivers installed. (Code 24)

    The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

    Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

    On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
    ---------------------------------------------------------------------------------------------------------------------
    The drivers for this device are not installed. (Code 28)

    To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

    ==================================================================

    Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

    References to Vista also apply to Windows 7.

    If they show upward then try to manually install the drivers.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
    to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Why this specific buffer Allocation?

    Win Vista, LabVIEW 8.6.1, PXI 8196, LV RT 8.6.1

    I have a problem with a PXI program used to control a motor/dynamometer by PID loops on a cycle prescribed thresholds (objectives specific speed/torque to meet).

    The normal use of the processor (as the output of the PXI monitor shows) is normally 2%.  My loop is 100,000 Hz, and I have been diligent in spreading the bypass, so it runs very efficiently.

    A 'normal' test was for 20 minutes, so we have never noticed a problem.  However, my client has recently published a test of 8 hours, and he noticed that the CPU would creep upward and upward during the test, to where it was 75% after 8 hours.

    I ran my own test of 2 hours and observed the same thing - the CPU usage crept up to 20%.

    In the hunt for things, I noticed it is correlated with the size of an array of values of the PXI controller: larger than array, the CPU usage more.  During the test, the set values are located above the host right in front of the time, so the table grows slowly as the test goes along.

    When the test is finished, the table does not, and nor does the CPU usage.  I can go right through to start a new test and the CPU usage drops when I send an order to clear the table.  Therefore, I am sure that the size of the array is the problem.

    A two hour test contains 120 x 60 x 10 = 72000 set points (the host set points are 10 Hz, 100 Hz setpoints are interpolated from the controller) to 24 bytes, which is 1.728 MB.  NOT a RAM huge hit (available from 2 gigabytes).

    I couldn't imagine why the existence of this large table would be time-consuming CPU, but the evidence is with myself: the bigger picture, the most used CPU.

    In the search for an answer, I started the buffer ALLOCATIONS view and found a place where LV makes a COPY of this buffer, and I don't understand why.

    But that would explain things: copy a table from 1.7 MByte to 100 Hz will certainly put a load on the processor.

    So here's the code: in the TRANSIENT state table is used to select and interpolate the next set.

    When the test is finished, we go to the State of SLOWDOWN, if the table is not yet used:

    After that, we are in idle state, where even once, the big Board is not used.

    Then, before I have to change the architecture of things to eliminate former set points (I have many problems with accounting), can someone explain WHY the buffer allocation shown is happening?

    Note that I show the case of '0', the other is 'default' which manages other 9 out of 10 cases.  But there is there again, a buffer allocation when the table is not yet connected to the inside.

    More importantly, avoid this allowance?

    It's hard to say without poking at him but I saw the similar models result in a copy of the additional buffer.

    (1) (less likely) the wire branch off to feed the size of the table is confusing LV and he thinks he needs another copy. I saw this in all LV 7.1 and can not ask with LV 8.6.1.

    (2) the sub - VI "to choose and interpolate the next set" has NO control on the connector of the icon on the "root" of the diagram and or data are not connected through. To understand what I'm upgrading to please see the "clear as mud" thread , where it was called Grg McKaskle out of retirement to explain how it can work Subvi in the buffer of the appellant (that's really what you want in the code you showed us).

    Reader Digest Version:

    When LV 'sees' data be passed to and from a Subvi and there is no operation that will change the content of the data, the data will be passed by reference so sub - VI will do its job in the buffer of appellants.

    This image of code shows the difference.

    Ben

    PS "Buffer Allocation" in the hand catches my attention.

  • HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

    HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

    Hello

    Please do not type in capital letters because it's difficult to read and considered to be shouting.

    ---------------------------------------------------------------------------------------------------

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    The system has RAID? If so, it's also very suspicious.

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E which is also 0x1000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
    interpret, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
    the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
    has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
    Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable
    or remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
    Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
    in Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the boot of the computer service
    by using the Recovery Console, and then by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You should also
    Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or
    Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
    BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
    space, reduce the number of files on the disk drive hard target. Find and delete any temporary
    the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
    contain fragments of file saved to disk scans. You can also use another hard drive with more drive
    free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

    ----------------------------------------------------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Why any screen recorder does not work on my computer? __

    Why any screen recorder does not work on my computer?

    Hi I formatted my computer and downloaded all the conditions for this, I downloaded hypercam and installed, I tried to open it in the tool bar and the start menu, it still does not work.
    I downloaded another program for recording of the screen, it also did not work, I tried 3 programs, they all did not work
    by the way my computer: windows vista service pack 2 and the screen recorders have worked before I formatted my laptop
    I need a solution pleaseeeeee

    I got this error in the three programs

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: ScreenVCR.exe
    Application version: 1.5.34.0
    Application timestamp: 2a425e19
    Fault Module name: StackHash_b4c3
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception code: c0000096
    Exception offset: 02e42a3b
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional information 1: b4c3
    More information 2: d2a8bebd21e0e9bfa99e084d53ece2b6
    3 more information: 74a 3
    Additional information 4: 0480b6e0a2e7a1df44ee618ae8d0084f

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Please give me a solution... :(

    my laptop computers Info

    Windows is Windows Vista Home Premium
    Intel (r) core (TM) 2 Duo CPU 26500 2.10 GHz
    3.00 GB RAM
    Mobile Intel (r) 4 Series Express Chipset Family

    =============================================
    Just a thought... maybe your video driver or DirectX needs and update?

    Have you tried the following applications:

    (1) Windows Media Encoder 9 Series
    http://www.free-codecs.com/download/Windows_Media_Encoder_9_Series.htm

    Direct Download Link:
    http://www.free-codecs.com/download_soft.php?d=571&s=327

    First steps with screenshot
    Using Windows Media Encoder
    http://www.Microsoft.com/windows/windowsmedia/HOWTO/articles/ScreenCap.aspx

    (2) Microsoft Expression Encoder 4
    http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=75402be0-C603-4998-A79C-becdd197aa79

    Expression Encoder training videos
    http://expression.Microsoft.com/en-us/cc197144.aspx

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

Maybe you are looking for

  • Photos on icloud - suppression device (s)

    Sorry if this message shows a lack of knowledge iCloud, but here goes! I "think" downloaded the photos on my iPad and iPod in the iCloud. Now I anticipate to take lots of photos on a next trip so if I delete photos from my devices to free up more sto

  • audio

    had this laptop for over 2/3 years.  Was working perfectly until the middle of last year.  Can play movies, but no sound, can't play music.  I have the regular sounds that come with the PC, but nothing else.  Help.

  • HP Envy 13-d001no: upgrade SSD on a new HP Envy 13 m2

    Hello! I just got my HP Envy 13-d001no. As I expected I really enjoy them until now, but I am interested the upgrade to a faster SSD with more storage on this subject. I'm looking at two different drives, namely the Samsung 850 EVO m2 and the Samsung

  • Cannot get Satellite A300 works well

    Hi all, I've had many, many problems with my computer brothers laptop for a while now. It is a Satellite A300 (PSAGCA-06P01Q), and initially the laptop worked quite well. However, he started a lot of freezing. Whenever we wanted to install a program,

  • fault bucket 0X9F_3_POWER_DOWN_IMAGE_RTKVHDA.sys, type 0

    Looking to help out the bucket of anomaly listed above.