Why treat "timestenrepd" on the Dungeon of database ensures consumes 600% CPU?

Similar Questions

• Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  Setup of Windows 8 consumer priview

  Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

  If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

  (1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
  To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
  http://www.partition-tool.com/personal.htm
   
   
  (2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
  Download Windows 8 consumer Preview ISO:
  http://Windows.Microsoft.com/en-us/Windows-8/ISO
  After you download the ISO file - use the Windows USB/DVD Download tool to install media:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
   
   
  (3) installation on a separate partition for dual boot:
  1 make a DVD or USB installation drive - to see the two options above.
  2. start from the DVD or USB install drive and click on install when prompted.
  3. during the installation process, when asked - choose a custom installation.
  4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
  5 continue with the installation.
     
   
   
  First of all please note:
  1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
  2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
  3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
  4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
  (A) remove your current hard drive and install the Preview of consumers on a spare drive.
  (B) install it on a spare computer.
  (C) install the Preview of consumer in a virtual machine.
   
  For more information - Windows 8 consumer overview FAQ:
  http://Windows.Microsoft.com/en-us/Windows-8/FAQ

• can't understand why an extract of the database restore fails (missing archive logs)

  Dear,

  I'm completely back up my database ensures every night with following statement.

  full backup AS BACKUPSET COMPRESSED ORCL_FULL_STBY format database tag ' / oradata/archive/fast_recovery_area/%d_%T_%s_%p_FULL_STBY' more tag ORCL_FULL_STBY archivelog delete all entries;

  I wanted to check with 'restore... Preview' if my backup is good enough to restore the database from scratch.
  result = failed!
  Reason:
  "any backup log archived for thread 1 with sequence 65 and YVERT departure from 49020676 found to restore."

  I have read the documentation oracle and articles for days, but I did not understand that even though I take online backup yesterday if I want to restore my database today I still need archival newspapers last month?

  can you please review my analysis and tell me where I am doing wrong?

  for example a piece from my last backup;

  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  1008 full 199.25 M DISK 00:04:44 October 8, 15
  BP key: 1010 situation: AVAILABLE Tablet: YES Tag: ORCL_FULL_STBY
  Item name: / oradata/archive/fast_recovery_area/QIPDB1_20151008_1057_1_FULL_STBY
  List of defined backup data files 1008
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  50570723 full 1 8 October 15 /oradata/data/qipdb1/system01.dbf
  4 integer 50570723 8 October 15 /oradata/data/qipdb1/users01.dbf

  as you can see "Cash SNA" is 50570723 so tells me that my understanding if restore these backups I need archived newspapers on top of the YVERT.
  for me the best candidate is

  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  65,25 M 1004 00:01 DRIVE: 24 OCTOBER 8, 15
  BP key: 1006 situation: AVAILABLE Tablet: YES Tag: ORCL_FULL_STBY
  Part name: /oradata/archive/fast_recovery_area/QIPDB1_STBY/backupset/2015_10_08/o1_mf_annnn_ORCL_FULL_STBY_c1dkfw9k_.bkp

  List of newspapers archived in backup set 1004
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 79 50310555 7 OCTOBER 15 50570723 8 OCTOBER 15
  
  BUT out of "restore...". Preview' RMAN stil tells me that

  any backup log archived for thread 1 with sequence 65 and YVERT departure from 49020676 found to restore
  any backup log archived for thread 1 with sequence 66 and YVERT departure from 49020693 found to restore
  any backup log archived for thread 1 with sequence 67 and YVERT departure from 49020696 found to restore
  any backup log archived for thread 1 with sequence 68 and YVERT departure from 49020761 found to restore
  any backup log archived for thread 1 with sequence 69 and YVERT departure from 49020836 found to restore
  any backup log archived for thread 1 with sequence 70 and YVERT departure from 49020919 found to restore
  any backup log archived for thread 1 with sequence 71 and YVERT departure from 49021021 found to restore
  any backup log archived for thread 1 with sequence 72 and YVERT departure from 49155291 found to restore
  any backup log archived for thread 1 with sequence 73 and YVERT departure from 49324912 found to restore
  any backup log archived for thread 1 with sequence 74 and YVERT departure from 49498102 found to restore

  When I look at V$ ARCHIVED_LOG I see seems indeed to these archived logs removed for cause of "more tag ORCL_FULL_STBY archivelog delete all entries ' that they have been deleetd after saving.
  and because of my retention policy and script; I remove the logs also archived backups that are more than 2 days.

  S SEQUENCE # FIRST_CHANGE # NEXT_CHANGE #.
  - ---------- ------------- ------------
  65 49020676 49020693 D
  A 49020693 OF 49020676 65
  D 68 49020761 49020836
  66 49020693 49020696 D
  67 49020696 49020761 D
  69 49020836 49020919 D
  70 49020919 49021021 D
  49155291 49021021 71 D
  72 49155291 49324912 D
  D 73 49324912 49498102
  74 49498102 49632131 D

  I still don't understand why rman complains of the archived logs that are for an older sequence (SNA) as my last backup
  because I was assuming that the concerned newspapers archived should have already applied to these files of data, right?

  My final goal is to deliver below for the case that we have lost everything.

  Run {}
  restore the database;
  recover the database;
  }

  Thanks in advance,
  Halit

  Hi guys,.

  I found the root cause and workaround

  RMAN-06025 - RMAN RESTORE DATABASE OVERVIEW to the backup site asks former newspaper (Doc ID 1599013.1)

  CAUSE Checkpoint_change# standby controlfile not refreshed properly.  BUG 15876029 - RESTORE PREVIEW ASKING OLD ARCHIVE LOG IN STANDBY DATABASE  Closed as DUPLICATE of  BUG 8740124 - CURRENT STANDBY REDO LOG GROUP SHOULD BE INCLUDED IN THE DATABASE BACKUP BY RMAN SOLUTION  1) Workaround is to recreate the standby controlfile.  OR  2) upgrade to 11.2.0.4 or above where Bug 8740124  is fixed  OR  3) check for availability of patch 8740124
  

• Error '80004005', an Exception occurred in the Microsoft JET Database Engine

  Hello

  I use Microsoft Jet 4.0 OLE DB Provider for storage in the database file Microsoft 2000 (.mdb file) for the past two months with no problems, now I get the error '80004005', of Exception occurred in the Microsoft JET Database Engine: could not open the database. It may not be a database that your application recognizes, or the file may be corrupt. I study some forums but could not get a definitive answer as to why this might be happening.

  Please, help me to understand this error so that I can avoid losing data in the future.

  Thank you

  Guilhem

  It is impossible to say when the problem occurred, but as Dennis said that Jet is not a robust database. It falls particularly in situations where is is called to manage large sets of data or be accessible from multiple users at the same time.

  In terms of alternatives, they are many if you want to go this route.

  Mike...

• Another application on the ebs r12 database

  Hello

  I would like to know if I can create another user on the ebs r12 database.

  That's another application (not ebs).

  What are the risks?

  Is there an id doc on this subject?

  Thank you.

  
  

  It may not be available for that Oracle doc. But as a principle, why the unrelated database schema is created in the EBS database. This will add more load on the database of EBS, administrative effort. Let's say that your EBS database is down for maintenance, while the other application accessing this scheme does not require maintenance always, it will be down.

  concerning

  Pravin

• Need to size the Oracle RAC database settings and configurations as storage size % etc.

  Hi Experts,

  We have a requirment that we need size parameters of database to an Oracle database RAC 11g as the sizing of disk space, memory, and CPU (SAN), Cluster size etc what would the size of the recommendation for major banks or large project? Can you describe in sizes (TB). I'm not sure of the growth of the DB files on a daily basis and no customers.

  Thanks in advance.

  Viji

  It is a bit of an oxymoron.

  You ask for one RAC server sizing. When RAC architecture allows you to evolve by adding more servers.

  So if you have treatment volumeX to do, you have only 2 servers fabricant1 RAC to deal effectively with him. Or you can need 4 servers Fabricant2 CAR care effectively. There are many factors (unique to this client) which determines the choices made.

  So 'sizing' the server is not a matter to be treated, until you've decided just what type of server, you will use for your RAC (dual core, quad core, 8 cores, base 16, etc.), how much he must take care of the memory, the amount of energy, it would consume, it takes up the amount of space (rack units) in a Cabinet how much local diskspace, it must support, how many PCI slots must be to HBA and HCA and other cards, etc.

  Once this is decided (1 rack unit, dual core processors 4, 2 PCI slots, etc), can you evaluate vendors and server models available and decide how much of these servers must be purchased to meet the needs of data processing envisaged.

  If for example, the decision is 3 servers and after deployment, it is determined that server capacity has been underestimated, then a 4th server can be purchased and added to the cluster of 3 Server - and the cluster set scale to actually do deal with the volumes of data processing.

  One of the fundamental reasons for RAC is scalability. This means that only one server sizing is much less important than choosing the correct h/w architecture which allows to evolve this cluster by adding more h/w.

  It would be very stupid to buy and build a server 2 CARS which was 'size' for volumeX, then find that the volume is X + Y, and 2 servers can only be resized at great expense to 3 servers (for example 4 unit rack servers, rack unit space only 2 left in the cabinet, required for quad powersupply by server power cannot be satisfied for 3rd server) (, no fiber port more SAN, etc.).

• Get the FS-10260 10794 FS FS-10495 error to create the integrated safety database

  Hello
  
  When I try to create the example of integrated security of Oracle database manager. But when it tells me error, below
  
  Versions: client = 3.4.1 3.4.2 OS = Server =
  
  Operation: Creation of database 'Failsafe_DB' example on the node 'WIN1.
  Departure time: July 14, 2010 22:55:15
  Elapsed time: 0 minutes, 7 seconds
  
  1 22:55:15 introduction of clusterwide
  2 22:55:16 FS-10905: WIN1: from the creation of a stand-alone resource Failsafe_DB
  3 22:55:16 FS-10371: WIN1: perform initialization processing
  4 22:55:16 FS-10371: WIN2: run the initialization processing
  5 22:55:17 FS-10374: WIN1: collection of cluster information required to perform the specified operation
  6 22:55:17 FS-10374: WIN2: collection of cluster information required to perform the specified operation
  7 22:55:18 FS-10375: WIN1: analysis of the cluster information required to perform the specified operation
  8 22:55:18 FS-10378: WIN1: preparation for the configuration of Failsafe_DB resources
  9 22:55:18 FS-10906: WIN1: creation of the independent resource
  10 22:55:18 > FS-10635: created the file c:\oracle\ofs_1\fs\fssvr\sample\Fs_Var.ora
  11 22:55:18 > FS-10368: appeal to the SCW database to create the database example; This will take a few minutes...
  12 22:55:22 * ERROR: FS-10260: failure of the attempt to create database example autonomous Failsafe_DB
  13 22:55:22 > FS-10367: check the logs at C:\OraHome\cfgtoollogs\dbca\OFS1 for more details
  14 22:55:22 * ERROR: FS-10794: the Oracle database resource provider could not create the stand-alone resource Failsafe_DB
  15 22:55:22 * ERROR: FS-10890: Oracle Services for MSCS failed during the createStandalone operation
  16 22:55:22 * ERROR: FS-10497: from clusterwide canceling the operation
  17 22:55:22 FS-10488: WIN1: from decrease in price of the operation
  18 22:55:22 FS-10489: WIN1: completed the restoration of the functioning
  19 22:55:22 * ERROR: FS-10495: Clusterwide canceling the operation is completed
  20 22:55:22 clusterwide failed!
  
  Here, I describe what I've done,
  
  Configured the 2 node clusters in Windows Server 2008. (using Oracle VM)
  Installed Oracle failsafe 3.4.2 (on private drive)
  Installed Oracle 11.1.0.6.0 (on private drive)
  Service Oracle for MSCS is running.
  
  Now, I do not understand why the creation of the example database fails?
  
  If anyone knows about this problem, then please post a comment...
  
  Kind regards
  Manish

  Hi manish;

  Please check:

  FS-10726 when you add a database to a group of integrated security [124664.1 ID]
  OERR: FS-10495 Clusterwide reduction in the price of the operation was completed [70458.1 ID]
  Bug 5770080: CREATE the EXAMPLE of DATABASE FAILS WITH 10.2.0.3.0

  For your error checking which i belive will not help so mch, but please check
  OERR: FS-10794 resource %s provider could not create the stand-alone resource %s [137861.1 ID]
  OERR: FS-10260 attempt to create database example of standalone %s failed [50840.1 ID]

  Please also visit:
  Oracle® Fail NotesRelease release 3.4.1 for Microsoft Windows
  http://download.Oracle.com/docs/CD/E10736_01/doc/Relnotes.341/e10719/TOC.htm

  Respect of
  HELIOS

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• WHY MY MAC at the BEGINNING of 2009 PRO 2.66 GHz Quad - Core Intel Xeon will NOT IMPROVE in SIERRA

  WHY MY MAC at the BEGINNING of 2009 PRO 2.66 GHz Quad - Core Intel Xeon will NOT IMPROVE in SIERRA

  Your signature says you're running snow leopard 10.6.4. If this is the case you must update to 10.6.8 in order to get the Mac App Store:

  Mac OS X 10.6.8 Combo Update v1.1

  You will need to upgrade to El Capitan until you can upgrade to Sierra:

  https://iTunes.Apple.com/app/OS-x-El-Capitan/id1147835434?MT=12

• Why do I get the message that I am running out of storage on my device when my storage icloud is practically empty?

  Why do I get the message that I am running out of storage on my device when my storage icloud is practically empty?

  It could be that your backup may be the cause.

  See if that helps - manage your iCloud - Apple Support storage space

• Why do I need the monthly 'Apple music' subscription?

  Why do I need the monthly 'Apple music' subscription?  I do not buy music... ever!

  You don't 'need' to an Apple music subscription, only keep it if you're going to use it or cancel the subscription.

  You probably are just signed up to the free 3-month trial, you will need to cancel before 3 months is up if you do not want to start paying for it.

  View, change or cancel your subscription - Apple Support

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Why Firefox has disabled the only version of Flash (10.1.53.64) my computer can use? (Mac PowerPC G5) Help!

  Why Firefox has disabled the only version of Flash (10.1.53.64) my computer can use? (Mac PowerPC G5) Help!

  Your computer hardware has arrived at the stage where most of the software needs resources your machine cannot provide because it's too old. You have a few choices.

  1. Get new hardware that can handle the latest software
  2. Use a different operating system, like Linux (which is free)

  I rehabilitated an old G5 recently and it runs very well in the latest Firefox. I put Lubuntu on the machine instead the MacOS. Lubuntu (pronounced Loo-boon-two) is sort of a Ubuntu lite - a user-friendly version of Linux. There are many applications of your choice, and everything is free.

  You can also use the Ubuntu greediest in resources and a little more user-friendly, also free, but you can be more pleased with the performance of Lubuntu instead.

  The PowerPC, I did this on was one of the old blue Bondi ones. Firefox 8 had no problem to start on it at all and has all necessary plug-ins for video, audio, etc... I gave him a church and it works well for them.

  You can download older versions of Firefox, but you'll just open to security problems if you do.

  FYI: The Mac operating system is based on Linux.

• Why not go to the 10.6.3 on apple, appstore or updater mac OS.

  Why not go to the 10.6.3 on apple, appstore or updater mac OS.

  Not true, the 10.6.8 combo will update any previous version of 10.6 to 10.6.8.

• Why an amplification of the RAM does not change the index performnance of windows vista?

  Why an amplification of the RAM does not change the index performnance of windows Vista?

  Hello

  I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
  Usually the 32 bit OS is capable to manage and send only 3.2 GB.
  The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
  In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
  But this is only my personal hypothesis.

  Welcome them