Why windows xp MediaPlayer 11 don't 'not' recognize my device apple ipod 5th generation although it uses for?

I don't know how to do the easy question.  my system is xp family, I use and have been using the windows media player 11.  all of a sudden the media player does not recognize my apple's 5th generation ipod.  iTunes recognizes the ipod.  the funniest is media 11 recognized the device at some point apple ipod.  I need a little help here please.

WMP is not supported with built-in support for sync with an iPod. However, you may install a third-party plug-ins listed in the http://thewelltemperedcomputer.com/SW/WMP/Sync.htm to add this support.

Alternatively, you can also use iTunes, or built-in iPod support to Winamp for synchronization.

Tags: Windows

Similar Questions

  • Why my port USB 3.0 does not recognize my device?

    While my laptop is turned on, and I plug my camera into the USB 3.0 port, my system does not recognize it. However, when I turned off my laptop, plug in my camera, then boot up my laptop, my system will recognize the device. Any advice on how to solve this problem would be greatly appreciated.

    Hello giant Lord,


    You must run the FixIt of the article-

    Hardware devices do not work or are not detected in Windows

    Diagnose and automatically fix the Windows USB problems

    Hope this helps!

  • I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D

    Original title: DVD problems

    I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D what is the solution. I tried the fix and I also used the Center 'Fix it '.


    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?
    3 are. what patch you referring?
    4. this happens to you with some specific discs?

    Reinstall the drivers for DVD player and check.

    1. click on start > run
    2 type devmgmt.msc and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
    3. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
    4. When you are prompted to confirm that you want to remove the device, click OK.
    5 restart the computer.
    6. when the computer restarts, the drivers will be installed automatically.

  • After that the last update itunes will not recognize my devices on windows 10

    After that the last update itunes will not recognize my devices on windows 10

    Have you tried these steps? If iTunes does not your iPad, iPhone or iPod - Apple Support

  • ITunes does not recognize my device. I have windows 10 on a HP Envy.

    I recently bought a HP Envy and it came with the operating system Windows 10. Whenever I plug my phone the phone companion rises and ITunes does not recognize my device.

    All the patches?

    Install the latest version of iTunes on your computer.

  • Why wireless keyboards are not compatible with the Apple TV (4th generation)?

    Why wireless keyboards are not compatible with the Apple TV (4th generation)?  Similarly, why didn't the App compatible with Apple TV Remote (4th generation)?  They will be in the future?

    No one here knows why Apple have so far decided not to support Bluetooth keyboards, or if they are likely to do so in the future. The iOS app is compatible with the 4 ATV in its latest version (4.2.3) - https://itunes.apple.com/gb/app/remote/id284417350?mt=8

  • I have a new laptop with Windows Media Player 10, which does not recognize my MP3 player: this has happened once before and I was able to download Windows Media Player 9. Where is he now and can do it again?

    I have a Samsung YP - U2J MP3 player and until I had to buy a new laptop it worked fine with Windows Media Player 9.  The new laptop comes with Windows Media Player 10, which does not recognize my MP3 player that my COMPUTER recognizes it and says everything is fine.  Can someone help me?

    Hello Amaliada,

    Thank you for your message.  We will add your MP3 device manually.  Please follow the instructions below:
    Plug in your mp3 player and open Windows Media Player.
    Click in the empty space (next), then select 'Tools' > select 'Options '.
    Select the "Devices" tab (you see yourself mp3 palyer?) If not, click on "Add" > select "portable music players.
    From there, you will receive information about the addition of your device.

    Please let us know if it did or did not help to solve your problem.

    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Media Player does not recognize the device (iphone)

    I'm trying to download music from Windows Media Player on my iphone. I can get the files in the synchronization section but the Media Player does not recognize my device or seem to have a way to connect. Can anyone help?

    You will need to install iTunes. The iTunes Setup program adds drivers and services for the iPhone. That's what I do:

    1. Once iTunes is installed, it allows to import all the music in Windows Media Player.
    2. If you want to automatically download album art, you will need to register for an iTunes Store account. Otherwise, just copy the album art from Windows Media Player:
    a. at a command prompt, cd in each music folder.
    b. attrib s h AlbumArt * Large.jpg
    c. xcopy AlbumArt * %tmp% Large.jpg
    d. attrib + s + h AlbumArt * Large.jpg
    e e.. now, for each album in iTunes, right click and choose 'Get Info'. Drag & drop the corresponding JPG of %tmp% in the field "Cover Art" and click OK.
    3. connect your iPhone. Select "Manually manage music" on the screen of the iPhone.
    4. click on the icon on the left side of iTunes music. Make sure that all the music that you want to synchronize has an audit. (This is the default).
    5 Select and drag it to the icon of the iPhone.

  • My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. Do you have any suggestions?

    My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader.  I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?


    I see nothing unusual, except that there should be a "0001", or even "0002"...

    When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...

    Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.

  • My Windows Media Center XP computer does not recognize my Nikon Super Cool Scan 5000 ED

    I have a Nikon Super Coolscan 5000 ED, which I have not used for several years.  I tried to install it using the Nikon Scan software and was a failure.  Site of Nikon said that by Hamrick VueScan will also run this scanner.  My computer does not recognize the scanner and so I can not install the drivers for it.  I tried to connect this device on several different computers and with different cables.  None of these computers does not recognize the device.


    As you mentioned that none of the computers recognize this device, you will need to contact the manufacturer and check.


    You can post your request here:

  • Satellite A30: Does not recognize USB devices.

    My computer does not recognize any devices when connected to the USB Port on my Satellite A30. After downloading SP2, I was able to install the printer, but I can't use it because there is no printer icon in the toolbar. If I want to print something I get the window of the printer, select printing, then it goes to the author of the Image of MS Office. Basically, I can't use my printer or any other device connected to a USB port.

    However, it was working perfectly fine when I had the home edition of XP but I can not reinstall this one because there is something wrong with the recovery disk that's why I had to install XP Pro.
    Also, I used to get a sound, letting me know that a device has been connected. I get more or the icon in the toolbar.

    Is that what I could do to fix this please? Is it possible to get another disc of recovery somehow? Obviously, it's something to do with XP Pro software, but I don't know what to do.
    Could you please help me?

    Thank you!


    If you get a window of the printer you need to select the right printer. If printing goes to MS Office Image writer so the right printer is not selected.

    On the new installation: If you install the operating system from the original Windows CD you must install the necessary drivers and QFE patches all in the right order.

    USB port: I found a useful paper on this topic:

    Good bye

  • ITunes does not recognize the device

    My I tunes does not recognize my I pad or I phone. There's no problem on another computer. I tried to remove Itunes and reinstall, but no avail. Computer is windows 10

    If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  • Qosmio F30 does not recognize USB devices

    My new Qosmio F30 does not recognize USB devices. Displays Device Manager USB ENHANCED CONTROLLER and ROOT HUB works fine, but the machine still wants to install each device but cannot. BIOS version seems to be V1.30. I tried the devices on other machines, and they work fine.
    Is there something that I missed?


    Before your shot the beautiful F30 can you please say what OS you are using?
    Did you use the OS from the Toshiba restore CD?
    On this CD, all drivers must be preinstalled and you don t need to install no matter what chipsets or anything like that.

  • my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

    my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

    Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:


    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • 9.3.1 IOS will cause questions to iPhones, because I have a lot of important things on my iPhone6 and iPod 5th generation I don't want to lose

    Update to 9.3.1 iOS will cause questions to my iPhome 6 and iPod 5th generation

    I have a lot of important things about them that I don't want to lose

    and I can't save them because my computer is broken

    I can't promise anything but through discussions on the forum questions to 9.3.1 vs threads have reported problems for 9.3, there are significantly fewer problems for 3.1 3.

    You can always save things until you do (honestly, it is advisable to always back up your device before installing new software)

    Even with a broken computer you can save things via iCloud, or simply important files to yourself by email or use something like dropbox, of them for download at.

Maybe you are looking for

  • iPhone5 icloud mail

    I recently bought an iphone 5 to someone, the phone is unlocked, but there an icloud account that I can't remove. There is no way of contacting the seller to remove him. What can I do? Is it possible for me to remove the icloud account?

  • update windows 7 home ultimate

    "" I just updated windows 7 home ultimate day and now I get an error stating that "the exception" efPMutilS.dll to 000274C 1.  Never get this error on reboot with the original version.  Why am I getting it now after paying 139.00 for the upgrade?

  • No sound on Windows XP Service Pack 3

    I write on behalf of a client. It has no sound. Already checked the material, try volume change came no audio device, had her before. He's also tried to run the difficulty, but the problem persists. Help, please. Thank you.

  • How to stop windows media player from loading when I turn on my computer

    When I turn on my computer, Windows Media Player will load automatically. How can I stop this?

  • G6 museums: impossible to reset factory my g6 of museums

    I have a g6 of museums which took an OS original win7 that I updated to win 10. recently I turned off my computer was starting up and after that he gave me a blue error screen that says: cinfig bad information system. I managed to install a pro 8.1 w