Why won't my Microsoft keyboard work during the start sequence () trying to get into the BIOS)?

Similar Questions

• Satellite L20 keyboard & touchpad work not but keyboard works in the BIOS

  On my laptop Satellite L20 not work keyboard and the touchpad and keyboard works in the BIOS, USB ports also does not (USB mouse).

  Can I get the BIOS update file (traditional update on the boot CD, no BONE!)

  Sorry for my bad English.

  If the update of the traditional BIOS is not available on the download page the only way to get it is to contact the nearest authorized service provider. They have all versions.

  But this problem of keyboard and mouse is really strange. can you use if you start the operating system in safe mode?

• HP 15-r203nv: model: 15-r203nv keyboard works in the bios and only safe mode.

  Hello there is a problem with this laptop, the work of keyboard in the bios and in safe mode and during my convalescence... but it does not work in normal mode. (F12 wifi light is white)

  Thank you very much

  model: 15-r203nv rev: 2213-120 products: L0E81EA #AB7

  Hello

  The fact that it does not work with a clean install starts to point to some kind of hardware problem, although it is strange that he will run in Mode without failure.

  Click with the right button on the taskbar, select Manager tasks, click the Startup tab - right click on each entry in turn and select Disable.  Once completed, restart the computer and see if there is no change.

  An update of the bios (F.39 Rev.A) is also available on the Product Page , which can be useful if you have not already done it - if you decide to apply, make sure you unplug all the devices (including the usb keyboard) before starting the update.

  Kind regards

  DP - K

• I can not download the Flash Player. GetPlus + R stops working during the process

  I can not download the Flash Player.  GetPlus + R stops working during the process

  Hey Kevin,

  A. what browser do you use to download flash player?

  Have b. you tried with another browser?

  Have c. you downloaded this earlier?

  Please, try the following steps.

  Step 1: uninstall previous versions of Flash Player

  Before you install Flash Player for any Windows browser, uninstall all previous versions, and then restart your computer. Try to download flash player, if it does not work then uninstall Download Manager and check.

  Step 2: Verify Internet Explorer security and ActiveX settings

  Make sure that the Internet Explorer security is set at a level that allows viewing ActiveX controls. The medium: default level allows you to view the Flash content. For any custom level, follow the instructions below. (Contact your system administrator for more information.)

  To change your security level:

  1. open Internet Explorer.
  2. choose Tools > Internet Options.
  3. Select the Security tab.
  4. Select the custom level.
  5. Locate the section "ActiveX controls and plug-ins.
  6. set "Download signed ActiveX controls" at the command prompt.
  7. the value "Run ActiveX controls and Plug-ins" Prompt.

  Step 3:

  Download and install the flash player.
  http://get.Adobe.com/flashplayer/

  Reference:
  http://kb2.Adobe.com/CPS/191/tn_19166.html

  You can also post your questions in the Adobe forums.
  http://forums.Adobe.com/index.jspa

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I'm about to upgrade premium creative design cs4 for I mac 10.11.2. can I still use it? If it's not like I'm retired and I have only some minimum number of works during the year, I can upgrde at a regular bundel and to add a tax when I get to work, and/or

  I'm about to upgrade premium creative design cs4 for I mac 10.11.2. can I still use it? If it is not that I am retired and I have only some minimum number of works during the year, I can upgrde at a regular bundel and to add a tax when I get to work, and/or monthly pay depending on my work schedule?

  Move the discussion to the download, installation, commissioning.

  Please check the terms of System. Adobe Creative Suite 4, Point products. You can upgrade to the App only and add more applications each time as needed. Please check: pricing and membership creative cloud plans | Adobe Creative Cloud for more details on the plans and prices.

  I hope this helps.

• Mouse Microsoft and Center keyboard problems during the recent Windows Update

  Windows 7 Professional 32/64

  Windows Update, it is a week downloaded Microsoft Mouse and keyboard Center.  Apparently it did not install correctly on Windows 7.  Messages of two windows now pop up when you start.  They are the exact same messages one above the other which must be clicked off the coast.  Here's the exact message:

  "There is a problem with the installation of the mouse and keyboard software Center.  To resolve this problem, you must remove the mouse and keyboard software from the Center, and then rerun the implementation of centre of keyboard and mouse.  For more information on the point to add or remove a program see Windows Help. »

  Message meaning, but the action of removing the software is not possible.  In the list of programs highlight Microsoft Mouse and keyboard software Center and you receive only one choice.  This choice is Uninstall, with no choice of repair .  Microsoft is lazy, or finally reached being just plain stupid.  When you click the installation here is the screen that opens:

  "Setup cannot continue because one or more of the required installation files are missing or corrupted. Rerun Setup from the CD-ROM of the software or any other facility reliable source. »

  If you cannot uninstall or repair the screwed version, then when you try to re - install, it won't let you move forward, and stipulates that you already have the software installed and it will not properly work, or will not uninstall or repair it properly.  You're essentially stuck between the hammer and the anvil.  I don't want these two double messages showing when I start my computer.

  For some strange reason, I think that this software is not properly tested to work on Windows 7.  I never install driver updates provided in Windows Update, but my wife has checked the box as an optional update.  Big mistake!

  What can I do to remove this Microsoft Mouse and keyboard software Center of my computer.  I downloaded the version 2.0.161.0 and 2.0.161.0 and won't install until the problem with the faulty software installed is removed.  WHERE IS THE BUTTON REPAIR?

  Thank you

  Bernard Butler

  You must have the patience of Job to work for MSFT.

  I, too, have the same problem as Mr. Butler, w2 further complications:

  (1) assuming that it was a Win Update that caused the problem, I went to system restore to restore to an earlier time and was shocked to find that, even if my Protection system is activated, it was never a restore point created.
  (2) in addition to this annoying pop-up message, I have now lost everything except text in all my applications (Word, Publisher, etc.) and my browsers.  No display no graphics.

  I tried your method 1 fix and received a message that it only worls on 64 bit systems.  Mine is 32.

  I tried method 2 and tried to install; Rec'd msg saying I had to uninstall it first.

  I'm taking your advice, but so far I lost three hours on this and have gotten nowhere.  Suggestion, please...

• Why my iTunes library sound randomly cut during the use of my new macbook pro and the old Bose speakers?

  Why my iTunes library sound randomly cut during playback on my new Macbook Pro and the old Bose speakers?

  The speakers connect through a USB port, instead of by means of the mini plug stereo audio output (headphone)?

  If it uses the standard audio out Jack, try to plug ordinary headphones instead.  The problem goes away or still occur?

• Microsoft is working on the lower graph Windows for low configure PC running on P4 processors?

  Original title: Microsoft Windows XP updates

  International news that I listen to Microsoft is Shutting Down Windows XP support! In my opinion, good decision but it is a problem here!

  Problem is that half of the poor Nations currently work on old systems of the world (Pentium 4) as demand for the latest Version of Microsoft Windows (Win 7 Vista) Pentium 4 is not reliable...

  Is that Microsoft is working on low graphics Windows for this Type of low PC configuration?

  Hello

  We have no information on this version of Windows. RT 8.1 8.1/windows platform is the most recent Microsoft and we will see the updated versions of these systems in the future.

  In my opinion, Intel Pentium 4 series of processors can run Windows 7 quite well, provided a sufficient amount of memory living and disk space are available. You can have a look at system requirements of Windows 7 for more information on this.

  Information on this link might be useful as well:

  http://www.Microsoft.com/en-us/Windows/enterprise/end-of-support.aspx

  Thank you and have a nice day!

• Could not access network location %APPDATA%\microsoft\windows\sendto during the installation of QuickTime for iTunes

  I get an error message "could not access network location %APPDATA%\microsoft\windows\sendto" when I try to install iTunes.  It always happens during the installation of quicktime.

  Hello m.minton,

  You can watch the following information from Apple on the installation of QuickTime:
  http://support.Apple.com/kb/HT1926

  Please let us know if the information of Apple Help or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to fix 'error message' installation of windows services stops working during the installation!

  Windows Vista Edition Home Premium

  service pack 2

  Toshiba

  satellite A135

  32 - bit operating system

  Hello

  1. Once you get the error message?
  2. What is the full error message?
  3. what program or the application you are trying to install?
  4. have you done any software or hardware changes on your computer before this problem?
  5 is the issue limited to a particular application?
   
  To work on the issue, check the following link.
  How to solve problems when you install or uninstall programs on a Windows computer
  
  http://support.Microsoft.com/kb/2438651
   
  See the steps mentioned under Windows Installer issues in the RESOLUTION section.
   
  Check if it helps.

• RelavantKnowledge has stopped working during the installation of updates

  Running Vista Basic. SP2.

  Dell Inspiron 1545 laptop computer.

  Downloaded updates about 4 days ago and now it will not start completely. I get an error message saying "RelavantKnowledge has stopped working". Windows checks a difficulty, find nothing and charge the top tool bar, but NO Office, NO start menu. I tried to go to the Windows Update site directly to redownload and reinstall updates, but of course, this is no longer an option. Help!

  See: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/relevantknowledge/d027633c-b320-4dc5-9da8-8b10e3348550

• Why do I have microsoft visual c ++ runtime error when I tried to install my hp printer

  Why do I have microsoft visal c++ runtime error when I try o install my hp printer cd

  Hello
  1 did you change on your computer before this problem?
  2. What is the brand and model of your computer?

  3. What is the exact error message?
  Follow the suggestions and see if it helps.

  Method 1
  You can see the article mentioned below.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2
  You can follow the procedure in the article.
  What is a runtime error?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-runtime-error

  You can also see the article for more information.
  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

• keyboard does not work when you start. Unable to get to the bios screen.

  When I reboot to get to the bios screen my keyboard does become functional until windows load. I don't remember what is a problem in the past, but since I disconnected everything recently I was wondering if it happens to be a USB port which remains hot during startup.  I have a Gigabyte motherboard.

  Thanks for all the help.  I found a port that remained hot during startup.  Not an easy feat because there are 6 USB ports on my MB.  Then after may restart to finally find, I remembered that I have also 2 USB ports on my Dell monitor that remain hot even when the computer is off.  A lesson I will never forget.

• Why gadmai 208/pt218 does not work with the 64-bit system (I have just a 32-bit driver)

  hardware driver not installed

  Hi Andry,

  Thanks for posting your question in the Microsoft Community.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the error message that is accurate or complete?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

   

  For more information:

   

  Contact Support Gadmei:

  http://www.gadmeisrilanka.com/gadmei-contact-details-numbers.php

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• NavigateToURL works during the tests, but not upon publication

  Trying to create a hyperlink simply in Flash.  Works perfectly during the test.  But when I download from the net, by clicking on the link takes me to www.thirdnewhope.com/iamtnh.blogspot.com rather than just www.iamthn.blogspot.com.  I tried to change allowscriptaccess forever.  It does not either.  I'm puzzled :-(

  AS3 code:

  button_1.addEventListener (MouseEvent.CLICK, goClick);

  function goClick(evt:MouseEvent):void {}

  var url: String = " " http://www.iamtnh.blogspot.com ";

  var req:URLRequest = new URLRequest (url);

  navigateToURL (req, "_blank");

  }

  HTML code:

  < div id = "flashContent" >

  < object classid = "clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width = "560" height = "400" id = "events2013" align = "middle" > "

  < param name = "movie" value = "events2013.swf" / > "

  < param name = "quality" value = "high" / >

  < param name = "bgcolor" value = "#000000" / >

  < param name = 'play' value = 'true' / >

  < param name = "loop" value = "true" / >

  < param name = 'wmode' value = 'window' / >

  < param name = "scale" value = 'showall' / >

  < param name = "menu" value = "true" / >

  < param name = "devicefont" value = "false" / >

  < param name = "salign" value = "" / > "

  < param name = "allowScriptAccess" value = "sameDomain" / >

  <!-[if! IE] >->

  < object type = "application/x-shockwave-flash" data = "events2013.swf" width = "560" height = "400" > "

  < param name = "movie" value = "events2013.swf" / > "

  < param name = "quality" value = "high" / >

  < param name = "bgcolor" value = "#000000" / >

  < param name = 'play' value = 'true' / >

  < param name = "loop" value = "true" / >

  < param name = 'wmode' value = 'window' / >

  < param name = "scale" value = 'showall' / >

  < param name = "menu" value = "true" / >

  < param name = "devicefont" value = "false" / >

  < param name = "salign" value = "" / > "

  < param name = "allowScriptAccess" value = "sameDomain" / >

  <!-<! [endif]-->

                      <a href=" http://www.Adobe.com/go/getflash ">

                          <img src=" http://www.Adobe.com/images/shared/download_buttons/get_flash_player.gif "alt ="Get Adobe Flash player"/ > "

  < /a >

  <!-[if! IE] >->

  < / object >

  <!-<! [endif]-->

  < / object >

  < / div >

  disable your Blocker for popups.