Similar Questions

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

• Does not see the utility Airport Airport Extreme or any other device in the House on the network. However, all devices are getting internet.  Backups on external hard drive are going wireless, too. Yosemite day and other software. What should do?

  Said Airport utility cannot find extreme AP, which used to be on the network and shows no other devices on the network. But all devices (MBPro, MBAir, iMac, iPod touch, iPad 2 air2) are connected to the internet. Wireless backups on external drives are being completed. El Capitan 10.11.2; Airport Utility 6.3.6. How do "seen it all" again?

  What should do?

  All you can do is to try to circumvent some of the bugs crawl into El Capitan.

  Given that the AirPort Utility becomes easily confused about what are the devices on the network, it will sometimes help to perform a complete cycle of power on the network. If you want to try it...

  Power off all devices on the network, routers, computers, accessories, mobile devices, printers, etc... in any order you want

  Wait a minute

  Turn on the modem first and let it run by itself for 2-3 minutes

  Then, switch on the device connected to the modem and leaves turn a good minute

  Keep power devices one at a time about a minute out until the entire network is back

  Recheck the AirPort Utility

  If still no luck, we will have to try some repellent on Mac.

• Why not Time Capsule shows under "other devices" in the Finder?

  Why not Time Capsule shows under "other devices" in the Finder on my MAC?

  "Devices" are connected directly to a Mac and would include things like USB hard drive, FireWire drive and Thunderbolt drive, etc.

  The Capsule is a "network" connected to a network drive... If the operating system on your Mac behave, Time Capsule will appear in the Shared section.

  If you have added a NAS (Network Attached Storage) disk, this product would also appear in the Shared section.

  A wireless printer can also appear under shared.

• Network management problem, computer laptop Windows 7 will not find other computers on any network, however all other computers on the network can access Windows 7 laptop.

  Basically, the issue I'm having is that my laptop does not connect to any other computer to access the actions or other files.  Other computers on the network can access my computer laptop shares and files without any problems.  Operating system is Windows 7 Home Premium x 64.

  What I tried:

  restarted
  uninstalling and reinstalling the files and printers, sharing maps and restart after completion
  all disabled firewall
  tried with IPv6 enabled and disabled without change, so it is currently enabled
  tried on a Wi - Fi and the differences are listed below in the section work (work is wireless)
  able to ping other comptuers
  access to other computers is permitted by other computers

  problem extends over several networks, IE I noticed it at home last night and the followed problem my laptop at work this morning.
  The problem is slightly different on the two sites.

  At home:
  I can see the other computers on the network, but I am unable to access it, even if I have permission, but other computers can access to my laptop.

  At work:
  Cannot even find other computers on the network but they can find and access my laptop.

  I have worked on this problem of non stop for several hours and did much more than what is said, but I am unable to remember everything.  I should have been taking notes: P

  Here are the results of the ipconfig/all command (I removed the physical addresses for security reasons):

  Windows IP configuration

  Name of the host...: Radiation-G72
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : hsd1.ga.comcast.net.
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR928X Wireless Network adapt
  Physical address.... :  **
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::f4e3:cd1c:6952:eb4d % 11 (Preferred)
  IPv4 address: 192.168.2.7 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Thursday, February 4, 2010 10:50:32
  End of the lease...: Friday, February 5, 2010 08:29:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 234890707
  DHCPv6 DUID customer...: 00-01-00-01-12-4C-6E-91-00-25-D3-3D-FC-9A
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {1797D168-6FC8-4DDF-8338-4E214119C26D}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e74:4ea:2920:b81a:cdc5 (Preferred)
  Address IPv6 local link...: fe80::4ea:2920:b81a:cdc5% 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Asked this question in the Windows 7 forum also because the problem was between windows 7 and Vista.

  Hello

  If it has started, you can try a system restore - an update "might" have caused the problem.

  1. try a system restore back to a point before that happened. And immediately thereafter enter
  Control Panel - Windows updates - top left settings and set it to download and informs you instead
  Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
  to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
  and let this value - manually search for drivers when you think you need. (See how and why to)
  stop day of drivers below.)

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  To uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
  Updates installed - uninstall

  I had completely forgotten the system restore!  While looking into the system restore, I found that when I moved into my new House and has cable Internet installed, the cable technology installed a program of comcast on my computer.  This caused me to not be able to connect with other computers.  After rolling back to install it before it works!   Thank you.

• What happens if I want to just pictures of my phone stored in icloud, but not my other devices?

  What happens if I want to just pictures of my phone stored in icloud, but not my other devices?

  Hello Lisa,.

  You can get more help if you posted in the forum to iCloud.

• I created a my page book epub file, and it works perfectly in ibooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  What's not?

  You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.

  The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?

• iTunes does not recognize my devices after the last update

  iTunes does not recognize my devices after the last update. Has crossed all suggestions from the support page (uninstalling/reinstalling driver USB, remove Lockdown folder and so on) but still no joy. iPhone continues to ask if I want to trust to the connected computer, responding 'Yes' has no effect.

  Help, please

  Thank you

  Cyana

  Found this solution here:

  Re: Does not recognize devices in iTunes on PC

  works very well

• I just bought a new Airport Express Terminal. It connects to my laptop, but not my other devices such as iphone/ipad. Any suggestions?

  I just bought a new Airport Express Terminal. It connects to my laptop and I have working internet, but my iphone/ipad do not work with it. They say they are "connected" to the wireless network but nothing works / charges on other devices. I tried to forget the network, by renewing the lease, etc and nothing works. Any suggestions as to why my laptop works but not other devices?

  What is the serial number and model of the modem you use?... or... The AirPort Express connects directly to the Ethernet wall port?

• IPad notes app 2 closes at the opening after installing ios9

  Since installed ios9 update on my ipad2 my notes closes a few seconds of opening the application.  This happens to someone else and do you know how to fix it?

  It is not happened to me, but double tap the "home" button and drag the application notes upward.  Then hold the gome and sleep/wake button until the Apple logo appears. Test again. -AJ

• Why can I burn a CD but not DVD? I tried the Fixit.

  10:03:42 #28 CDR-1135 file Writer.cpp, line 306
  Write error
  E: HL-DT-ST DVDRAM GSA - T40L
   
  10:03:42 #29 Text 0 File DVDR.cpp, Line 3818
  EndDAO: Last written address was - 1 (FFFFFFFFh)
   
  10:03:42 #30 CDR-1135 file WriterStatus.cpp, line 292
  Write error
  E: HL-DT-ST DVDRAM GSA - T40L
   
  10:03:42 #31 TRANSFER file-24 WriterStatus.cpp, line 292
  Could not perform end of Disc-at-once
   
  10:03:42 #32 phase 38 file dlgbrnst.cpp, line 1767
  Burn process failed at 8 x (11 080 KB/s)
   
  10:03:42 #33 text 0 file SCSIPTICommands.cpp, line 287
  SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
   
  10:03:44 #34 text 0 file Cdrdrv.cpp, line 11411
  DriveLocker: UnLockVolume completed
   
  10:03:44 #35 text 0 file SCSIPTICommands.cpp, line 450
  UnLockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  Existing drivers:

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brands of discs can also affect a burn quality, drives good markets are rarely a value.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  --------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• We have two iPhones, two iPads, two MacBooks. On each calendar events are synchronized via iCloud, except the inscriptions on the iPhone 6 +. They don't publish to other devices if the phone receives entries from all of the other devices. Help?

  We have two iPhones, two iPads, two MacBooks. On all the calendar events synchronize correctly via iCloud except the inscriptions on the iPhone 6 +. They don't publish to other devices even if the phone receives entries from all of the other devices. All the settings on the iPhone 6 + match those on other devices. All iOS and OS 10 software is up-to-date. Anyone have any ideas on what could be the problem?

  Hi there, therex!

  It seems that you have done your inquiry very well and it seems you have reduced to the iPhone 6 Plus. But, since you need see events sent from the phone on all your devices, I'll be happy to help you.

  Archive or make Copies of your Calendar (s) -as you work with live data, be sure to not skip this step to protect the information already there.

  Get help using iCloud calendars - test all the steps, but it has been my experience that I forgot to put this particular calendar as my default calendar.

  Thank you for using communities of Apple Support and have a great day!

• Cannot find NI0DAQmx devices on the network. Test Panel button grey

  Hello

  I have a Dell than T710 Win Server 2008 R2 64-bit. NidaqMX 9.3 is installed. The dialog box search for network OR-DAQmx devices cannot find my NI ENET-9163 carrier with a card NI 9215. This card has a static IP address in the same subnet as the LAN of the PC port. I ping the device.

  However in the search network OR-DAQmx devices dialogue box I can add the Board manually by specifying the IP address. This seems to half work as long as it saves the map MAX, but the test panels button is grayed.

  I installed Nidaq MX 9.3 on my win 7 64 bit laptop and I can find the card properly and test it. Clearly there is something wrong with the config on the Dell software, but I have no idea what. Any help is appreciated. I stumbled on, IP addresses etc. I also disabled the 3 other network ports on the Dell server in case that is the question.

  Thank you

  Andrew

  Hello Andrew,.

  I could do some tests on our Windows 2008 R2 server. I was able to replicate this but not as easily as you did. We have 2 network adapters on that server. We have solved this problem is to do the following:

  1. disable IPv6 IP addressing all the ports of the network.

  2. change the metric of the Interface on the network adapter. We have high, so a value of 50. You can get this metric by going into the properties of your network card > your IPv4 properties > advanced on the general tab > UN select Automatic metric and replace with static. (the entries are 1-60). Do this for all of your network adapters. Given that we have this setting that we have never seen the question re occur.

  We also checked that it doesn't happen at all on the new cDAQ-9181 chassis. This chassis is intended to replace the ENET-9163. If it is possible for your upgrade I would recommend this option. You should be able to work with your local sales channel to get one to test with. We have 20 + 9181 in this system and have never seen the issue of not being able to Max commonality to the chassis.

  Let me know your results to adjust the parameters I mentioned above.

  Thank you!

  Corby

  CDAQ PES of R & D network

• Do not remember the WPA key. Other computers on the network

  I don't remember my WPA key and reset isn't exactly an option since I have other computers already configured for the existing key. I don't mind reset other computers as well if I knew for sure that it works. However, there is a discrepancy between the length of the WPA key on my Linksys (indicated as asterisks-33) and the length of the WPA key shown on the laptop of my wife (indicated as asterisks-63).

  I am trying to add a Wii to my network. Our router is currently not broadcasting the SSID, but I typed the name of the router in the Wii in any case. (She even will be able to find a network that is not broadcasting its SSID?).

  I also added the Wii MAC address to the list of trusted computers.

  Regarding the password, I considered to change but I'm worried I might spoil my wife configuration.

  When I go into my wireless settings, I see that I use a WPA TKIP encryption which is 33 characters long. However, when I go into the configuration of the network on my wife's computer, she says that his encryption key is 63 characters (WPA - PSK TKIP). Why the keys of different length?

  Is it possible to change the encryption key on the router to something I'd remember? If so, that will enter my wife's computer? Wouldn't make sense that what I typed in the settings wireless of Linksys (33 characters) would be the same as mine rather than 63 characters?

  I'm so confused.

  Any help?

  First, the County of asterisk is meaningless.  Even the number of characters in your password is a secret, so all good programmer who wrote your wireless network card driver shouldn't have a number of astrerisk which corresponds to your password.

  Set your "broadcast SSID" "enabled."  Do you really think someone will lose hundreds (or thousands) of hours of time to break your password, just enter a router WPA?  As long as you use WPA or WPA2 and a password, you shouldn't worry about your SSID broadcast.

  You can use any key (sometimes called password or password) you want, but all the keys (in router and all computers) will be the same.  Ideally you should use a strong password.

  Choose passwords (keys): you should never use a Word from the dictionary as a password. If you use a Word from the dictionary as a password, or WPA2 can be cracked in a few minutes. When you take your login password and key encryption (password or password), you must use a random combination of uppercase letters, lowercase letters and numbers letters, but no spaces. A connection password, must be 12 characters or more. WPA and WPA2 passwords must be less than 24 characters. Note: Your key, password or password should not be a space in it.

  Most individuals should have their routers defined so that "remote management" of the router is disabled. If you must have this option enabled, then your password needs to be increased to a minimum of 24 random characters.

  An additional problem is that Windows XP requires SP3 run WPA2 (WPA with AES =).

• HP Photosmart 5520: HP Photosmart 5520 not shall be connected to the network or print.

  Our printer working fine until a couple of days. Now, when we print dialogue print open but constantly says "the printer is not connected. I tried to connect to the router using the screen of the printer, but get a message saying "cannot connect". I rebooted everything what it many times.

  At some point during those two days, I have managed to get so our imac had found the printer and actually thought it was printing, but nothing only happened at the end of the printer. Now I'm back to "the printer is not connected. I don't know what caused that change or change it back.

  Someone had mentioned to a static ip address in the printer, so I tried this (assuming I did it correctly) passing through the settings - without wire-advanced settings-ip settings-manual where it says ip address no connection, then put an address ip, but this was not accepted and always says 000.000.000.000.

  The Test report suggested allowing MAC wireless network could be the problem, but somehow, I spent (don't know how) and the latest report ' NECK until low but above indicates a problem IP address by saying that our ' HP printer is currently configured with an IP address of auto. On most of the networks that it will prevent your printer to communicate on the network... run the next solution." The solution suggested to restart then print a new test report and then says "check that the printer has received a DHCP IP from your network router address, check the configuration source in the current configuration of the report section - it should show DHCP. But after I restarted again the ip address shows 0.0.0.0 and the configuration source said no "specified." The test report gives no solution to change the ip address to view DHCP so I'm stuck. My Advanced settings still say IP settings - automatic. Help appreciated. Thank you. P.S I'm not good with all this talk about techy but I am surprised that, in my opinion, I understand what I wrote!

  I removed the ssid password and managed to print. I put the password, it is lacking in WPA WPA2 & (I have not WPA2-AES) and again the printer cannot connect. The printed report again now says FAIL to no filtering and implies that there is something to do with active mac filtering which I don't understand. Thanks for your help so far. We are called to take the kids to the movies can be on so not for awhile.