WIA scanner driver is not compatible with the picture of programs in Windows 7

Similar Questions

• I have a Belkin USB peripheral switch I used with my PC or my wife. I just replaced his PC with a laptop with Windows7. The driver is not compatible with the new op system. You or Belkin have download free fix or pilot?

  Driver is not compatible with the new op system.  You or Belkin have download free fix or pilot?

  www.Belkin.com

• Inspiron 6000 new hard drive is not compatible with the old

  I just bought a drive hard 2.5 "new for my Inspiron 6000, a Seagate Momentus 5400.4 (250 GB).  The interface does not seem compatible, unfortunately.

  My computer is already more than 3 years old and I replace with a HD 2 years expansion, simply unplug the old, switching on the connector and plug the new. They must have changed the interface on the new readers!

  My question: is it likely, I just need a different connector, or is the new HD totally incompatible?   I have this spec should I ask the manufacturer of HD in order to ensure that a new HD fits?

  Thank you

  
  

• Not compatible with the selected drive - Satellite A300D firmware update

  Hi, I have a problem with the update of the firmware. When I try it says "the Firmware is not compatible with the selected driver.

  And another problem is that my dvd drive does not DVD - R and DvD + R is running very slow and big trouble, it must try several times to succeed.

  Please help me.

  Hello

  Maybe you should tell us what CD/DVD drive you have and where you have downloaded the update of the firmware.
  In my opinion firmware update is not normally necessary.

  Have you ever tried to remove upper and lower filters in the registry? This often solves problems with ODD.

• "Failed to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer

  I have Lexmark X 5410 printer with the installation CD. Installed perfectly on computer with Windows Vista 32 bit. Try to install on Vista 64 bit computer but get error message "unable to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer that blocks NT 4.0 drivers (1930). Tried using the compatibility in the computer. Without success. How can I fix?

  Original title:

  32-bit and 64-bit Windows: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  Excerpt:
  Can I run a 32-bit program on a 64-bit computer?

  Most programs designed for 32-bit version of Windows works on the version 64-bit windows. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to theVista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

  .
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error "this graphics driver is not compatible with this version of windows" when you try to install the graphics card

  Title: windows 7 Enterprise 64-bit

  I have hp Pavilion dv6 2138 ca for computer pc laptop and intel hd graphics and nvidia grahics on my windows 7 Home premium 64-bit, but after I've upgraded to windows 7 Enterprise and try to install the graphics driver nvidia. It is said

  the NVIDIA Setup program cannot continue and this graphics driver is not compatible with this version of windows.

  while I chose the latest graphics driver from the hp Web site.

  kindly tell me, that means the sentence above means and what programs and features must be changed in windows? or what steps should be taken to install nvidia graphics?

  answer me

  Thank you

  Hi Hamdullah,
   
  Welcome to the Microsoft community.
   
  "I understand from the description of the issue, you do not know the error' Nvidia graphics drivers are not compatible" when you try to install the drivers. I will definitely help you with this problem.
   
  (1) what is the model of the graphics card are you using?
   
  Method 1: If the NVIDIA GeForce GT 320 M graphics driver, I suggest you to download the Nvidia graphics drivers from the link and check if it helps.
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100095-3&cc=us&DLC=en&LC=en&OS=4063&product=4125893&sw_lang =
   
  Method 2: If the problem persists, I suggest to select the graphics driver and check if you have any driver update available.
  http://www.nvidia.com/download/index.aspx?lang=en-us
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• I am trying to open samsung pc studio and it givesme an error message and windows then told me my flash drive is not compatible with my system... this after I downloaded the flash player im told is compatible with my system

  I am trying to open samsung pc studio and it givesme an error message and windows then told me my flash drive is not compatible with my system... this after I downloaded the flash player im told is compatible with my system

  In general, when the desktop software uses Flash Player, it's because they're incorporating an Internet Explorer window in the application.  If you do not have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop app is not going to work.

  Then, launch Internet Explorer

  Go here: http://get.adobe.com/flashplayer/

  Follow the prompts and then relaunch the application after you have completed the installation in Internet Explorer.  I hope this sorts for you.

• bad display wddm is not compatible with the vga adapter

  transparcency is horrible, wddm is not compatible with the vga adapter

  Hello

  1. who is the operating system installed on the system?

  2. do you get an error message?

  Method 1:

  Follow the link and check if the VGA card is compatible. Check if it helps.

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/

  Method 2:

  Follow the link below and install the drivers in compatibility mode. Check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  For more reference: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/problem-with-windows-display-driver-model/a98ccf9a-da4a-465d-bc69-4d0e88470057

  Let us know if it helps.

• After the installation of Windows Vista, I get this error: winload.exe tries to load a 64-bit application, but this processor is not compatible with the 64-bit mode.

  I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:

  Winload.exe

  Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?

  Thank you

  Ryan

  Hello

  Do a clean install of XP with the XP disk provided by Dell, if you.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.

  They should do this for a small fee.

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Vista installation was able to destroy this option of relocation:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP

  See you soon.

• is not compatible with the version of windows you are using, with X 86 or X 64

  My son downloaded something and now I can't use anything on my computer, I get "not compatible with the version of windows that you are using, with the X 86 or X 64... I uninstalled it but it will not go away, I tried to do a system restore, but I get the same error... ideas?

  What antivirus you typed the problem started?

  It seems fishy to me, it could be a virus that has been downloaded at a given time, perhaps even until this program was installed. I would try an online virus scanner.

  Try this: http://windows.microsoft.com/en-US/windows-vista/how-do-i-remove-a-computer-virus
  And: http://quickscan.bitdefender.com/en/ (from what I hear, it removes something fishy, so be careful!)
  But also: http://housecall.trendmicro.com/
  It should work with IE (Internet Explorer).
  Curiously, the ones I tried before I could not find, so I did a quick search and these look good.
  I forgot to ask sooner, but you can open command prompt (start > Accessories > try click right-click on command prompt, and then run as administrator)?
  I hope this helps!
  PS What version of Internet Explorer you have?

• BOOTMGR is missing. Get the message "this version of the system recovery options is not compatible with the version that you want to repair...» »

  Two days to try to solve this problem of complete.  Vista Home Premium (64-bit) has been installed more than 6 months ago.  With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium.  I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard.  I started in safe mode, and I can see the different folders.  It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.

  Thanks for the suggestions!

  Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665.  It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• No sound help please - driver is not compatible with my version of windows

  Original title: no noise don't please help

  While UN-installing some I have programs no longer use i accidentally uninstalled my driver audio soundmax. I have a dell optiplex gx520 with the 32-bit version of windows 7 Home premium. I tried to find and re - install the driver sound max and I find one and download each time it says that the driver is not compatible with my version of windows. I would really like my back her again. also, I went into the start menu and click on the sound devices and game controllers, and all that shows is my webcam. I know that I have an internal sound card and a speaker and I know that they do not work, but when I searched for the pilot, he was gone and so I know that it is uninstalled by me when I remove other programs, I no longer use. any help you could give me would be greatly appreciated. Thank you.

  Hi Bill,

  See the link to install the drivers for the Dell OptiPlex GX520. The drivers are not available for the Windows 7 operating system. Therefore, I suggest you to install in compatibility mode and check if it works:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the results.

• My digital camcorder Panasonic NV-GS11 USB driver is not compatible with my Windows 7 OS

  * - Original title - programs Application Applications App Apps games inherited Freedoms (e) (s) hang crashes aren't more answers like

  My "digital video camera", Panasonic NV-GS11 can't work with my PC because the 'USB Driver' is incompatible with the Windows 7 OS. Please help me! Thank you.
  My digital camcorder Panasonic NV-GS11 USB driver is not compatible with my Windows 7 operating system. Please help me! Thank you.

  Hi John,.

  I see that the usb for digital camera driver is not compatible with windows 7. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4 is the issue limited to usb drivers?

  Method 1.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  Installing the driver in compatibility mode and check.

  Make sure to run older programs in this version of Windows: http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Method 3.

  Install a USB device: http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Try these steps and let us know the status.

  Thank you.

• When trying to install Micro Cookbook 5.5 program get this message "this version is not compatible with the version of windows that you are running."

  Original title: MIcro Cookbook 5.5 install problems on Windows 7

  When I try to install a recipe program I get this message.  This version is not compatible with the version of windows that you are running.  Check the system information of computers to see if you need a x 86 (32 bit) or a or x 64 (64-bit) version of this software and then contact the editor.  I knew how to do this job of file transfer to the 32 bits of the 64 folder, but it won't let me install the program.  This software is no longer made.  The program is Micro Cookbook 5.5

  Do not transfer you files x 86 or x 64, that simply do not work and other issues.

  The program is designed for Windows 9, and if you have a version of win7 64 bit and the origonal is a 16-bit program, which she may very well, it will not install or run on 64-bit PC, so err msg you see.

  If the installation of the drive try this, locate the setup.exe, rt click & Select compatibility and select Windows 9 *.

• Intel USB 3.0 eXtensible Host Controller Driver is not compatible with Windows 8

  "" I am currently running windows 7 and was about to upgrade to windows 8, but the upgrade of Windows 8 Wizard says that "Intel® USB 3.0 eXtensible Host Controller Driver is not compatible with Windows 8 '. Is there any solution for this? How to install the drivers USB 3.0 for windows 8? Should I uninstall the drivers before updating?

  Help, please

  I thank in advance

  Hi badesha99.

  I'm glad to know that you've posted on the forums of Windows 8.

  I suggest to uninstall the driver and upgraded to Windows 8.

  USB 3.0 driver Windows 8 has native box, which is automatically installed after upgrade to Windows 8.

  See the mentioned link below for more information.

  http://www.Intel.com/support/chipsets/USB3/sb/CS-033870.htm

  Hope the above information helps and let us know the question in your next post.