Wich RAM upgrade 4 go to 8 GB Satellite C70 - B 34 H?

Hello
I tried 3 different SO-DIMM RAM to 4 GB to 8 GB. The last is a Kingston - Dimm DDR3 PC12800 KVR16S11S8: those already in use is a Samsung DDR3 PC3L - 12800 S - 11-13 B 4 / M471B5173DB0: do I really need to install exactly the same model of Ram? Is there a list of compatible products?
Thank you very much

Usually, you should be able to use modules from different manufacturers, and the mixture of memory should be possible also. But of course at any time different RAM modules do not work together correctly.

In my opinion because of compatibility issues, it is advisable to use RAM modules which are equal to each other...

As far as I know Toshiba recommends these two modules for a C70 - B upgrade.

4 GB DDR3L - 1600 PA5104U-1M4G
8GB DDR3L - 1600 PA5104U-1M8G

Tags: Toshiba

Similar Questions

  • Satellite Pro C850-1HD: valid guarantee after RAM upgrade?

    I work with a laptop Toshiba Satellite Pro C850-1HD in the warranty period, and I would like to know whether to extend the warranty for laptop RAM is maintained.

    Thank you

    > I would like to know whether to extend the warranty for laptop RAM is maintained.
    RAM upgrade does NOT affect the warranty.

    Here you can find instruction and nice workaround how to replace Toshiba Satellite Pro C850 modules series
    [Satellite Pro C850 / L850 - Memory Module replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU2603BZ0000R01.htm]

  • Satellite R630-13F - RAM upgrade

    Hi all

    My R630 is faced with a newly added software for Photoshop (CS5 version). Whenever it is quite slow to open and try to merge the picture for the economy.

    I was wondering if I can upgrade the RAM. With a very limited knowledge, I would like to know if I need to buy an additional (if there is a vacancy for it), or I need to get one to replace the old.

    I think increasing the memory to 4 GB, but I was wondering if it will be enough for Photoshop. Thanks a lot for any input.

    Best wishes

    Tim

    Hey Buddy,

    RAM upgrade is not a problem because it is easy and can be done in a few minutes.

    Satellite R630 has Intel HM55 chipset, and the maximum capacity is 8 GB. This means that you can install 4GB module in each memory location. Also an upgrade to 4 GB is not a problem, you can keep your 2 GB module and just buy a new 2 GB module. The module DDR3-10066 part number is PA3676U-1M2G.

    If you have more questions just after, again :)

  • Satellite C670D-10W - RAM upgrade

    I recently received a Satellite C670D-10 w, which has 2 GB of memory. I would like to add a module of memory, but I can't find any mention of this on the site of toshiba of what kind, etc.
    Other that, 'don't use that toshiba has approved' modules.

    Can which module I get for this machine?
    TNX

    Hello

    For the RAM upgrade, you can use follow RAM modules:

    1 GB DDR3-1066 PA3675U-1M1G

    2 GB OF DDR3-1066 PA3676U-1M2G

    4 GB DDR3 - 1066 PA3677U-1M4G

  • Satellite Pro A120 RAM upgrade?

    Hi all

    I need at least 1 GB of RAM to run a program and I have 504 MB.

    I'm just wondering if you guys know exactly what I need because I have never updated anything on my laptop before. The model number is PASC1E-03X00YEN.

    I'll probably order via the WEB for all the tips on the suppliers would help.

    Thanks in advance
    Paul

    Hello

    If you want to increase the RAM to 1 GB then you need another 512 MB module.
    As I know the laptop support modules DDR2 PC2-5300 RAM and generally the 512 MB PC2 - 5300 DDR2 RAM (PA3511U1M51) must be compatible.

    Please check this space of the forum:
    http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=114

    Here you can find videos how to replace the RAM.
    I didn t find your Satellite A120, but the upgrade of RAM is very similar to all laptops.

  • 17 - p120wm: hp laptop 17-p120wm RAM Upgrade DIY or shop service

    I can't find information about the max ram upgrade or how to remove what I can buy new ram and install it myself.

    It has the factory installed 4 GB SDRAM DDR3L (1 DIMM).

    I use a large workshop and if I can't install it myself they will for me when I can buy the max ram for this model.

    Thanks in advance for your comments.

    KIM

    Maximum RAM memory supported 8 GB

    Memory SODIMM slots two - NOT accessible customer / extensible DDR3L-1600 dual channel support DDR3L-16009 single channel support DDR3L-1333 channel simple Support (DDR3L-1600 downgrade DDR3L-1333) supports up to 8 GB of RAM in the following conƭgurations & #29;

    Total system memory of 2048 MB (2 048 × 1).

    Total system memory of 4096 MB (4096 × 1).

    Memory system total 6144 MB (4096 x 1) + (2 048 × 1)

    8192 MB total system memory (8192 × 1).

    Service Manual:

    http://support.HP.com/us-en/product/HP-17-P100-notebook-PC-series/8499335/model/8888513/manuals

    http://h10032.www1.HP.com/CTG/manual/c04777516

    Kind regards.

  • Satellite 3000 - X 4: Question about RAM upgrade

    Hi all

    I'm looking for more information on how to upgrade the RAM for my SATELLITE S3000 - X 4 (120 MB RAM, 14 GB HD I think!). Here's a little history...

    This laptop is about 5 years old, and I'm hoping to speed up a bit. I don't want to buy a new computer because she usually serves my needs.

    I emptied my hard drive files and unwanted programs. And I ran Jv16 Power Tools to clean the registry and minimize starts the process.

    It's always a little slow and if I am considering upgrading the RAM because I think I can do this for about £50. My questions are:

    What type of upgrade RAM should I look to buy? (This laptop have 2 RAM "plug-ins" or just one?)
    What is the size of RAM upgrade is the maximum an S3000 - X 4 could face?
    Could a novice like me to adapt to the style DIY upgrade?

    Thanks for any help you can offer!

    Gabrielle

    Hi Gabrielle

    He is old enough. I looked for some info, but unfortunately I n t have not found much. The device can use the 512 MB of RAM, and you can use 2 sticks of memory. I'm not 100% sure but I think you can use the module with tracking number PA3086U - 1. 25 M.

    The unit is not known to me but please check the underside. On most units, you can find coverage of memory.

  • Pavilion dv6t-3000 CTO Ente: Pavilion dv6t-3000 CTO Entertainment Notebook PC - RAM upgrade

    Hi all

    Happy new year 2016!

    Need help on RAM upgradation for dv6t-3000 CTO Notebook PC (laptop).

    --------------------------
    My system info:
    Model: HP Pavilion dv6 Notebook PC
    Name of the operating system: Microsoft Windows 10 home
    OS version: 10.0.10586 n/a build 10586
    OS configuration: Standalone Workstation
    OS Build type: multiprocessor Free
    Processor (s): 1 processor installed.
    [01]: Intel64 family 6 model 37 Stepping 2 GenuineIntel ~ 2133 Mhz
    Intel (r) Core i3 CPU M 350 2.27 GHz
    Slot 1: 2 GB Samsung 1067 MHz MEM
    Slot 2: 2 GB Samsung 1067 MHz MEM
    Motherboard: 144 c 65,38

    Virtual memory: Max size: 7 862 MB
    Virtual memory: available: 2 319 MB
    Virtual memory: in use: 5 543 MB

    (bought in 2010 HP online shoppig)
    --------------------------

    I wanted to be the existing 2x2gb RAM upgraded to 2 x 4 GB.
    In the maintenance and the service manual (c02657339.pdf) information, following a very generic info is seen:
    -----
    Two SODIMM slots for customer-accessible/extendable
    DDR3 PC3-10600 1333 MHz memory
    Supports dual channel

    Supports up to 8 GB of memory system in the following configurations:
    Total system memory to 1024 MB (1024 MB x 1)
    Total system memory of 2048 MB (1024 MB x 2, dual-channel)
    Total system memory of 2048 MB (2048 MB x 1)
    Total system memory of 3072 MB (1024 MB x 1 + 2048 MB x 1)
    Total system memory of 4096 MB (2048 MB x 2, dual-channel)
    System memory total 6144 MB (2048 MB x 1 + 4096 MB x 1)
    Total system memory of 8192 MB (4096 MB x 2, dual-channel)
    -----

    Analysis of the essential:
    Maximum memory: 8192MB
    Recommendations of the participle did not «...» PC3-10600... ».

    -----
    I've visited the forums, recommendations are given by competent persons for purchases of RAM.

    Issues related to the:
    1 is my laptop - portable, compatible computer for the upgrade of the Rams the existing 2 x 4 GB 2x2gb?
    2. following has been recommended for a similar case in the forums (for a slightly different configuration):

    http://www.Newegg.com/product/product.aspx?item=N82E16820231342

    (1.5V)
    G.SKILL 8 GB (2 x 4 GB) 204-pin DDR3 SO-DIMM DDR3 1333 (PC3 10600) laptop memory model F3-10600CL9D-8GBSQ

    (Not sure if is 1, 5V for my machine)
    Can I use the same (2)... or else want to recommend pieces for 2 x 4 GB with the purchase that I don't get no exact corresponding to those. One or the other setting is different.

    Thanks in anticipation,
    Srini

    Your request has been covered in the next more old thread.

    http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/dv6t-3000-RAM-upgrade/TD-p/2484041/page/2

  • Qosmio G20-139 - Ram upgrade question

    Hi my name is m.k.ash

    My equation on my Qosmio G20-139 PC Ram upgrade
    In prouction specifications said maximum extension 2048MB

    I can upgradeed 4 g or not? or only 2048 max.
    Thank you very much

    Hello

    If the manual indicates that only 2 GB are possible then you can move the RAM only to 2 GB (2 x 1 GB module)

    I thing the laptop supports the Intel 915 PM chipset and it supports 2 GB of RAM.

    See you soon

  • Qosmio X 500 02G RAM Upgrade - Compatible speed

    Hello world
    I am looking to update my RAM in my Qosmio X 500 02G to 8 GB, but I have a few queries.
    I looked in the manual and on a site of RAM config but found no answers. The toshiba also recommended that RAM has quite ridiculous prices.

    This laptop does support dual channel? and it supports 1333 MHz?

    It's the kits im RAM is seeking
    [Corsair 1333 8 GB: http://www.mwave.com.au/sku-37150059-Corsair_8GB_2x_4GB_DDR3_SODIMM_Memory_Kit_PC3_1060 0_1333MHz_Dual_Channel_9_9_9_2]
    It is also in the 1066 MHz version if that's what I use.
    [Corsair 8 GB 1066: http://www.mwave.com.au/sku-37140266-Corsair_8GB_2x_4GB_DDR3_SODIM_Memory_Kit_PC3_8500 _ 1066MHz_CM3X8GSDKIT1066]

    Alternatively, that if dual channel will not be a benefit
    [G-Skill 4 GB x 2 | http://www.cplonline.com.au/memory/laptop/gskill-4g-single-1333-mhz-for-laptop-f3-10666cl9s-4gbsq.html]

    Thank you

    > The Toshiba also recommends that RAM has quite ridiculous prices.

    Kingston modules are good quality RAM modules.
    Personally I always buy good quality RAM and I never had any problems of compatibility or performance.
    You can read here in the forum on the problems of compatibility as laptop RAM power not on after RAM upgrade or similar
    They always uses some modules at low cost.

    In general you can use the modules of DDR3 1066 MHz (PC3-8500).

  • Issue of satellite A110 - 195 Ram upgrade

    Magalie everyone I need to ask a critical question on my Toshiba laptop model name: satellite a110-195, nude model: psaboe.

    1. I'm a Ram with Buss 533 512 MB DDR2, if I changed it to Buss 667 2 GB of Ram it downgrade to 533 buss works well & not cuz disorders & being stable in my laptop or not?

    2 - What is the maximum Ram sizes & bus which can my laptop deals with it?

    Please review quickly because I have problems in Rams upgrades thx

    Post edited by: lover of matrix

    Hello

    Say the user manual on the upgrade of RAM?
    In general this info is always mentioned in the user manuals

    But generally, must be knowing that RAM upgrade depends on the chipset.
    The FSB (front side bus) chipset is important for the speed of the RAM.
    If the FSB supports only 533 Mhz then your RAM modules would go max with speed 533 Mhz and RAM modules support a faster speed; That is to say to 667 Mhz.

  • After upgrading RAM, the screen does not work on Satellite L30 - 105

    Dial up on laptop and screen does not work. Have updated the memory to 2 GB.
    This can be the reason of the screen works not? Have tried rebooting the system, but it helps t n.

    Hello

    Can you please tell us which laptop model you have? Have you noticed the same problem until you do RAM upgrade?
    What's on the new RAM? Did you buy a compatible?

  • HP Compaq Elite 8300 SFF: RAM upgrade

    Hello!

    I tried to replace the 4 GB of RAM, upgrade to 8 GB with a pair of G.Skill. Unfortunately, it didn't turn out as planned, instead, I had a series of beeps and a black screen. RAM details below:

    old RAM: Samsung M378B5273CH0-CK0

    4GB 2Rx8 PC3-12800U-11-10-B0 1.5V

    New RAM: G.SKILL RipJaws X

    F3-12800CL9D-8GBXL

    PC3-12800 4GBx2

    CL9-9-9-24 1.5V

    The Rams are not compatible with the system or are there other factors that could have caused it?

    Claude, welcome to the forum.

    Here's Maintenance and Service Manual for the computer.  On Page 94, you will find the section of memory for the computer.  Please read it carefully.  What I've read, only seems to me that the new memory is compatible with the motherboard.  I think that the timings are incorrect.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Satellite P100 - 216 (PSPADE) - CPU / RAM upgrade options

    Hello guys,.

    I just got a laptop Satellite P100-216 (PSPADE-01400UEN). (card: T5500 - GeForce Go 7600 512 mb, 200GB)

    It has a Core 2 Duo T5500 inside and I intend to upgrade as well as the RAM to make a good laptop for my wife.

    The question if CPU is supported (assuming that the latest version of the BIOS). I am interested in the series with FSB800 or same T9000 T7000 series (1066fsb) shall if possible because I can get them pretty cheap - I know that the T5500 is just 667fsb by itself, so I wonder if the higher FSB is supported or I stay with 667 Mhz.

    Have searched through the net, but no information so far. Would not buy CPU only for it being not recognized by the laptop.

    Any advice would be much appreciated.

    Kind regards

    It is very nice for laptop and if you want to upgrade the RAM upgrade for your wife. In combination with the operating system pre-installed and optimized its own missus will be like to work on this machine.

    Upgrade of RAM is quite problematic and you can do it alone. what you need to do is get the compatible modules and high quality.
    I think now P100 has 2 GB of RAM, but you can upgrade to 4 GB.

    As compatible modules, you can use
    TOSHIBA
    PA3513U-1M2G (memory 2 GB DDR2-667 Kit) or

    Kingston
    KTT533D2 / 2G 2GB 533 MHz Module
    KTT667D2 / 2G 2GB 667 MHz Module

    On the CPU upgrade, I would just say that we forget. As a first step, it is not necessary to do so and secondaly - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

    Bye and good luck.

  • Lenovo B590: RAM upgrade is not detected

    Hi all

    Yesterday, I bought a chip of PC3-12800 CL11 204 pins SODIMM RAM Kingston 4 GB of my local store of hardware because I wanted to update my Lenovo B590 memory, which - by default - has 4 GB of DDR3 RAM installed. I have double checked if memory was compatible with my B590 calling Lenovo support and searching the Web (which gives this message, for example). The two sources confirmed the upgrade should not be a problem if I did not exceed the limit of 8GB. However, after that I had plugged the RAM, I found that it was not recognized by my OS (Windows) and my BIOS. They are always saying that I only have the factory installed 4096MB.
    How can I make my system use this RAM upgrade? Please help, you have my gratitude!

    Note: when I determine which RAM to buy, I've checked also which type of memory was already installed in my B590 by the manufacturer. I unscrewed my notebook and found a chip, brand Hynix memory, I assumed it was a single 4GB chip. However, the search results for of his series on the web show it is in fact a DDR3 SDRAM 2 GB chip. I checked my hardware, but could not see any other chip (even though I'm 100% sure that my system has 4 GB of RAM installed by the manufacturer). If this has nothing to do with the above? Thanks again!

    RESOLVED: The RAM chip is not inserted properly in the additional location. All works fine now.

Maybe you are looking for

  • I have Windows XP and my files keep disappearing from the trash that have not been deleted

    I have WINDOWS XP AND MY RECYCLE BIN GUARD REMOVAL EVEN thought THAT I'VE NOT DELETED FILES

  • Vista Business / XP Pro downgrade question

    I bought a computer with Vista professional which has been downgraded to XP Pro.  The product key that comes with it is for Vista Business.  I can't install Vista Business using the key provided with the computer?

  • Windows 7 starts questions

    I have problems to start my computer. It goes to a page of startup repair is unable to repair itself  I find myself restore to the factory settings and it takes several tries, but eventually starts.  Here is the report that is displayed.  I can provi

  • How can I make a call?

    Hi all!I'm new in the cascades and I have problems with the phone calling code, I tried to use the code in the documentation but Momentics I see a light bulb on 'import bb.system.phone 1.0' and in the simulator when I push the button to see the touch

  • IOM - OUD LDAP Sync

    Hi allI do the field "usr_change_pwd_at_next_logon"-> zero in IOM and the same value must be synchronized to OUD "obchangepasswordflag"-> False for the below mentioned conditions:1. whenever a user account is created in IOM by using the APIs of the I