Widget deployment problem

Similar Questions

• Chassis FPGA deployment problem

  Hello!

  I use cRIO 9024 with a voice coil actuator control modules.

  The problem I have is that when I run the FPGA code, he said "the chassis is in programming mode Interface to Scan. In order to run the FPGA screws, you must go to the property page of the chassis, select the FPGA programming mode and deploy settings. »

  So I checked the property, but it has been defined as "FPGA programming Mode. Also when I'm trying to deploy the chassis, I have error message "LabVIEW: (Hex 0x80DF0010) current deployment operation has a missing dependency."

  Since I'm not the one who wrote the code, I have no idea what causes this problem. This code is used for the different game with the same model of cRIO but different modules. I've already replaced modules that I use with those that are necessary for this code.

  Anyone know what is happening here, please?

  Thanks in advance to 1 million.

  Geehoon

  
  

• OR 7966R - the bitfile deployment problem.

  I've implemented the following

  SMU 1085 three chasiss NOR SMU 7966R FPGA inside.

  I'm connected to a remote host via MXI using an SMU-8381

  I tried to run the NI 5761 - single CLIP.lvproj sample provided with race and LabVIEW examples just to get things to the top.

  and I get the following message if poster on all targets...

  Compilation went well but can't deploy the bitfile...

  Kind regards

  Maciej

  To the hour... so my bad, I forgot to mention one thing in my game to the top.

  I got a sync 6674 t module that is currently seems to be a little tired. Since I don't have the intention to use it then.

  I removed the chassis and things started work very well.

  It seems that it has caused problems.

  Kind regards

  Maciej

• MView delta deploy problem between SDDM schema and db (Swap models target dictionary import) - overview of the DDL generation

  Hello

  I'm having a hard time to reverse the difference between my role model and my fusion database schema.

  The initial goal is simple:

  1 / detect differences in metadata

  2 / I SDDM to generate the DDL change code

  (if possible, if not, recreate, reload: powerful existing featured BTW)

  3 / deploy

  4 / check/confirm that no more delta existing

  I do this:

  * menu file > import > dictionary

  * Select connection

  * Select the db schema

  * check the "Swap target model.

  * Select MY_MVIEW > next (TABLE 1 DB object to import) > finish (work "Generate Design")

  * in the model comparison window, I have to deselect everything, less table MY_MVIEW AND also MY_VIEW Materialized View

  (as they appear as 2 SDDM objects)

  DOF Preview button

  I see:

  -comments created in first place (whereas the MVIEW should be recreated)

  which is smaller but still blurs the legibility

  -MY_MVIEW is systematically recreated

  (how many times already I deploy)

  I figured out:

  . SDDM objects tables (disorders, implemented in the MVIEW form) and host MVIEW (Physics) the query independently

  . even if I sync them manually (copy - paste), DDL deployed code is not strictly identical to

  So it may have to do with a dysfunction compare?

  SDDM is full of options to desensitize compares (physical exclusion, storage, etc.), but I found no way to simply compare and align MVIEWs

  (and the documentation is rare on the subject)

  Any clue?

  THX

  Interesting.  Looks like you're it's partitioning that is causing the problem.

  In a model, partitioning information can be held on the objects of physical model for Tables and materialized views.

  In the case where a Table and materialized views are linked together (by the implementation as a Materialized View on physical model Table property), it is information of partitioning that is held on the Table which is relevant.  The information on the Table is used when generating DDL.  And in an import or synchronize, partitioning information are added to the Table object.

  I think that what is happening in your case probably is your model includes some details of partitioning maintained on the Materialized View object.

  Synchronization is combining the details of your database partition to the Table in the model.

  As it does not associate the details of partition of your database with the materialized view in the model object, the comparison shows a difference for the materialized view:-not partitioned in database, but partitioned in your model.  And this difference is causing the drop and re-create the view materialized in the DDL.

  There are various options to work around this:

  1. you can remove details unnecessary partitioning and maintained on the view materialized in your model object.

  2. you can clear the check box for the entry for materialized views in the tree in the dialog box models to compare before making the DOF preview.  (But it also means that no DDL will be generated for all other differences in these materialized views).

  3. you can use the filter properties to filter the relevant properties (e.g., partitioned, partitioning columns and Subpart columns for Materialized View objects), and then select the button refresh trees before performing the DOF preview.  (See the screenshot below).

  

  David

• Cube deployment problem.

  Hi all

  In fact last Friday I created some members in the Application of EPMA in DEV, TEST, PRO environments, after as I have deployed the Cube Test was successful, but when I deploy in Env Pro so fails, the error log says,

  \\Outline of verification errors:

  \\Member [XXXX] has several copies of the same shared in at least a stored hierarchy member.  See other messages so that members and hierarchies.

  \\Aggregate storage outlines only allow any shared member [XXXX] once in a stored hierarchy, including the prototype.

  \\Aggregate storage outlines only allow any shared member [XXXX] once in a stored hierarchy, including the prototype.

  Stored \\This hierarchy has multiple copies of the same shared member [XXX_XXX_XXX].  Remove the additional members or change the hierarchy in order to be dynamic.

  Can someone guide me to solve the problem.

  Thanks in advance.

  Hello

  Thank you for your answers

  The problem has been resolved, it was with the soft shell, sketch has been corrupted.

  Thank you.

• incomplete deployment problem

  Hi friends,

  I hope you do well!

  I have a problem with weblogic server that when I run a page, it displays a message in the paper like

  weblogic.application.ModuleException: Context path "/ ProjectName-ViewController1-context-root" is already used by the module: projectName-ViewController1-context-root application: projectName_application1

  at weblogic.servlet.internal.WebAppModule.initAndValidateContextPath(WebAppModule.java:1210)

  at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:970)

  at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:382)

  at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:433)

  to weblogic.application.internal.flow.ModuleStateDriver$ 2.next(ModuleStateDriver.java:375)

  Truncated. check the log file full stacktrace

  >

  [19: 13:08] # incomplete deployment.  ####

  [19: 13:08] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  # Cannot run application projectName because of the deployment on IntegratedWebLogicServer error.

  [ProjectName application stopped and cancelled Server Instance IntegratedWebLogicServer]

  When I restart the J-developer then it works very well for a time the same problem when I redeploy repeated...

  Can someone solve my problem?

  Thanks in advance,

  Nanda,

  There is already an application that is deployed using the context root/projectName-ViewController1-context-root. You must delete it. Go to the administration console, deployments, find application deployed using this name and remove it.

  Thank you

• CentOS 6.4 model deployment problem

  Hello.

  Ideploy and customize template CentOS 6.4. I choose Red Hat Linux 6 instead of CentOS 4/5/6 when creating VM basis because the customization option has been disabled during deployment if I chosse CentOS. Now customization options are available, however, after completing the wizard, copy the virtual machine and at the very last step will raise an error "customization of the guest operating system is not available for this configuration... ». Perl and VMware Tools are installed on the base virtual machine which the model has been cloned.

  Please help me solve the problem.

  Thanks in advance.

  Hey, try this:

  http://helpfulit.blogspot.com.es/2012/04/how-to-use-OS-customization-for-CentOS.html

  Look in the comments for alternatives.

• Package CC using SCCM deployment problems.

  Get the following error during package CC Photoshop/InDesign (device based licenses) via SCCM deployment - "Windows cannot open this program because it has been prevented by a software restriction policy".

  Installation fine when I click OK on this error. But at the launch of the shortcut, a window of "Login required" , which should not be the case, as I build packages using approval option in Creative Cloud Packager. There is no problem, when I install these packages manually on the computer, which seems to be a question SCCM as it installs with the SYSTEM account. Exactly don't know what is the cause, struggling to solve it, must deploy to users within the strict chronology.

  Can you please see this and help? Kindly let me know if you need more information on this issue.

  Thanks in advance...

  Have you seen our SCCM deployment guide?

  Using creative cloud | Package from Adobe with SCCM deployment

• Widget slideshow and Composition Widget synchronization problem

  I have a slide show with pictures and the widget of the composition of the text that corresponds to each slide. The parameters are the same for both, works very well on desktop even on versions of the Tablet and iphone, they are messy.

  Here is the site of BC: dezinegirl

  I've been waiting for the customer via Chat to figure it out by looking at my files, but it has been an hour and I don't think he knows.

  Does anyone else have this problem?

  BTW: I work with a model purchased.

  Thank you!

  Hi Pam,.

  Instead of using the widget slideshow in synchronization with the widget of the composition, I will propose that you pass to the use of a widget of composition. Slideshow widgets does not block of text but widgets of composition allows to images as well as text blocks. So you can allocate individual blocks of text for each target and that should give you the effect you're looking for without any problems of synchronization.

  Let me know if you need more information on this.

  - Abhishek Maurya

• JAX - RS Web service-deployment problem

  I am creating a restful Web service in Eclipse EPCO + Weblogic 10.3.6. When you use 'com.sun.jersey.spi.container.servlet.ServletContainer', I have no problem in the deployment and execution of the service. (kept in pots of Jersey in the lib to the application directory).
  
  but when you use 'weblogic.jaxrs.server.portable.servlet.ServletContainer', ranks not found exception during deployment. Can someone tell me what jar has this class that must be available on the classpath?
  
  FYI: I chose weblogic system libraries in the way of the construction and the facet of the JAX - RS project is selected.
  
  Thank you
  A

  This class is only available from WLS 12.1.1.0 "weblogic.jaxrs.server.portable.servlet.ServletContainer" Please check below for weblogic 12 c documentation that supports the two classes
  weblogic.jaxrs.server.portable.servlet.ServletContainer
  com.sun.jersey.spi.container.servlet.ServletContainer
  http://docs.Oracle.com/CD/E24329_01/Web.1211/e24983/configure.htm#RESTF179

  10.3.6 only "com.sun.jersey.spi.container.servlet.ServletContainer" is available.
  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13734/rest.htm#WSADV572

  Kind regards
  Sunil P

• ADF Application - Development Mode deployment problem

  Hi Experts,
  
  I have jdev11.1.1.5.0 in combination with weblogic 10.3.5.
  
  my application works fine, while running on integrated wls (just give a click right and on my page jspx - auto deployment).
  
  If I go with manual deployment of option on same wls integrated or stand-alone wls means
  
  I can able to get my login page, if I have some means of connection he did re - direct to my index page than it would be problem? (it doent replicate this kind of integrated wls (auto deployment))
  
  Details of my Application
  use all adf security. my login page is in extended session bean index page - backing bean of limited scope.
  
  My diary shows, your user name and password is correct. This means that it can have access to my Module of the Application.
  
  use adfc - config to redirect

  <control-flow-rule id="__5">
      <from-activity-id id="__6">loginPage</from-activity-id>
      <control-flow-case id="__7">
        <from-outcome id="__13">error</from-outcome>
        <to-activity-id id="__8">loginPage</to-activity-id>
      </control-flow-case>
      <control-flow-case id="__14">
        <from-outcome id="__16">success</from-outcome>
        <to-activity-id id="__15">Indexpage</to-activity-id>
      </control-flow-case>
    </control-flow-rule>

  This project does not behave like this days Olden.
  
  I scored on the sample for deplying a standlone wls and wls adf application built-in. It is very good.
  
  can anyone guide me where am?
  
  one has an idea?
  
  so am manual deployment I had dialogue "deployment configuration" to deploy.
  
  I got this in my journal.
  

  [01:07:44 PM] Entering Oracle Deployment Plan Editor
  [01:07:46 PM] No metadata repositories found on target server. Using values found in adf-config.xml. //show this red collor

  User707, can you on which you deploy the application? It is a stand-alone server or server that comes with jdev?
  Question: can you post the url that you use to launch the application on the server? The url contains ".jspx" as part of it?
  If Yes, try to remove the ".jspx" out of the url.

  Timo

• Deployment problem. in Oracle 11g - Jdeveloper 11.1.1.4

  Hi all
  
  I created an Application Server connection and tested and got all 9 successful tests.
  
  When I try to deploy my bpel program...
  I right-click on the bpel project and select deploy, I dnt get any existing connection to deploy. I just get the name of proj once more.
  
  Usually, it takes get tat area in which we need to deploy. Here I HAV not these options.
  
  After the creation of the connection to the application server, hw I could connect to the bpel proj...
  
  My console works fine however.
  
  Kindly help me to solve this problem. Thanks in advance.
  
  Kind regards
  Sabarisri. N

  How to start this soa_infra. SHD, I do this 'Control' of my console soa_infra tab?

  First, go to the tab target of soa-infra and make sure that it is targeted toward Server SOA. Then go to the tab control and try to start it. If a mistake happens, post it here.

  Kind regards
  Anuj

• Flex Dataservices deployment problem

  I m using dataservices to connect to my database via php. It works great so far.
  The problems start when I want to deploy the application, because I had to make some changes to my template .fml file.
  Here is an excerpt:
  
  < name of annotation 'ServiceConfig' = >
  < name of the item = "PHP_RELATIVE_LOCATION" > MyApp/application/amf/Navigation.php < / item >
  < name of the item = "PHP_SERVER_ROOT" > C:/xampp/htdocs < / item >
  < name of the item = "DEFAULT_ENTITY_PACKAGE" > valueObjects < / item >
  < name of the item = "PHP_SERVICES_FOLDER" > C:/xampp/htdocs/MyApp/public/flash/services < / item >
  < name of the item = "PHP_LOCATION" > C:/xampp/htdocs/MyApp/application/amf/Navigation.php < / item >
  < name of the item = "LINKED_FILE" > Navigation.php < / item >
  < name of the item = "PHP_SERVER_ROOT_URL" >http://localhost/< / item >
  < name of the item = "ABSOLUTE_ENDPOINT" >http://localhost/MyApp/public/amf< / item >
  < name of the item = "PHP_CLASS_NAME" > AMF_Navigation < / item >
  < / annotation >
  
  As you can see I have not integrated my in my project of zend amf endpoint point, West no gateway.php and more
  integrated php used to 'talk to the database' classes. I had to do in order to make the thing whole execution
  with zend and the doctrine as a session layer ORM.
  As I now paths and specific values for my development environment the question is, in a way that I can
  use another for my release .fml file to run in my production environment? Of course I could modify the .fml
  every time for the release build, but it would be really a pain... and also I have just can´t believe that Adobe didn t
  provide a scenario like this and has some sort of solution.
  
  

  I found the answer myself.

  I had a look at the files generated outside the .fml, i.e. _Super_MyApp.as file and there it says under _serviceControl.endpoint 'http://localhost/and so now "where in default configurations would be"gateway.php"only. As I joined the gateway.php in my Zend controllers. that is AmfController.php I put ... /AMF in my .fml file. Now, it seems to work.

  However I still wonder what this does...

  MyApp/application/amf/Navigation.php

  C:/xampp/htdocs

  valueObjects

  C:/xampp/htdocs/MyApp / / flash/public services

  C:/XAMPP/htdocs/MyApp/application/AMF/navigation.php

  Navigation.php

  http://localhost/

  http://localhost/MyApp/public/AMF

  AMF_Navigation

  ... URL and access roads are obviously wrong here, but that doesn´t seems to be a problem when exporting. I guess that's only for introspection of services in flashbuilder, right? Or will I have more problems?

• The cluster application deployment problem

  Hi all
  
  I am trying to deploy a portal application single (with a single jsp page) in a cluster.
  I created a cluster(name: ClusterOne) with two managed servers: MS1 and MS2 on the same machine.
  
  I tried to deploy the application only on MS1 via the administration console. In deployment, after I do install > save changes* ear is in prepared State. I select the ear and clicked on service requests all to have the ear in the Active State. I get this error and the ear goes to the new State.
  
  * weblogic.management.DeploymentException: [Deployer: 149003] cannot access source application «C:\bea\user_projects\domains\MyClusterDomain\MS1\TestEAR\TestEAR.ear' application «TestEAR» information The specific error is: [Deployer: 149003] there is no application file to ' C:\bea\user_projects\domains\MyClusterDomain\MS1\TestEAR\TestEAR.ear'...*
  
  and the error on the console is
  
  + < June 18 2010 12:22:48 PM PDT > < error > < HTTP Session > < BEA-100083 > < webapp:TestEARAdmin in the application: TestEAR has PersistenceStoreType value: replicated_if_cluste +.
  Red for http sessions, but the target list does contain not all members of the cluster: ClusterOne. Inhomogeneous deployment for replicated sessions is not allowed. >
  + < June 18 2010 12:22:50 PM PDT > < error > < hats > < BEA-149265 > < error has occurred in the execution of the request of deployment with the ID ' 1276888965382 'for task 6'. Error is: "weblogic.application.ModuleException: could not load the webapp: ' TestEARAdmin" + "
  weblogic.application.ModuleException: cannot load the webapp: "TestEARAdmin."
  at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:378)
  at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:391)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
  Truncated. check the log file full stacktrace
  
  This error indicates clearly that the TestEAR has PersistenceStoreType value: replicated_if_clustered but if I look in the weblogic.xml PersistenceStoreType is set to the memory , but not replicated_if_clustered.
  
  No idea hence his pick up replicated_if_clustered even if PersistenceStoreType is not set to memory in weblogic.xml.
  
  Application works fine when it is deployed to the server administrator or on all servers managed in the cluster.
  
  no idea?
  
  Thank you
  Win

  Hi victory
  1. If I'm not mistaken, any Application of Portal can be targeted ONLY to the entire Cluster, NOT managed individual servers. It is also quite true for 8.x and 9.x and 10.x. For the quick test, Undeploying and remove your custom console weblogic portal application. Then choose Insall, select your EAR and do the deployment. In the last screen when you select the target, select the ENTIRE CLUSTER. Do NOT select NO the AdminServer, because by default, any domain cluster portal will have all the Modules Framework portal deployed only in the cluster. If you cannot deploy your portalApp to admin. If you really want to admin server also, so you need to target all the modules of Portal Server admin also. See the file config.xml for targets of the modules and you can get an idea. In any case, coming back, target your application portal to the complete Cluster and see. This should deploy without any problem as cluster_if_replicated etc. etc. Because, by default, all these parameters have a default value. I have deployed a lot of portalApps to the clusters with no additional parameters. So, I am confident, it should work.

  Now, if you really want to deploy your portalApp only in MS1. Create then the 2 groups. CLUSTER1-> MS1 and Cluster2-> MS2. Then, you can deploy your portalApp on Cluster1. Note that a domain can have multiple Clusters and a Cluster can have multiple managed servers.

  Thank you
  Ravi Jegga

• JDeveloper (11.1.1.3.0) deployment problems (error: No Partitions Found)

  Hello
  
  I'm having a problem with the new version of the JDeveloper. This morning I installed and tried. That's all is OK.
  
  But I came to the need to deploy one of my BPEL Applications to an old Weblogic Server. The problem came because the new version that came out today from the weblogic server has a new structure called Partitions.
  
  Now when I'm deploying an earlier version of the weblogic server, JDeveloper keeps returning the error "No Partitions Found". How can we solve this problem without reinstalling my computer to the previous version of Weblogic and JDeveloper?
  
  Thanks in advance,
  Daniel Alves

  You say I need to have installed in my PC as many versions of JDev that versions FMW that my clients have installed?

  That's quite correct, Yes.

  At the same time, I got 6 versions of JDev + 3 versions of the OA Framework installed on my laptop, so it's certainly possible.

  John