Widget - getting information from a url

Similar Questions

• Why can't get information from frequency of NI USB-5132

  Hello

  I use NI USB-5132 and try OR Scope example measure a library.

  I wonder why I can't get information from the input signal frequency.

  Thank you

  In the flexible Panel, you need to adjust the time/Div and, possibly, the Volts/Div to get a consistent result. Make a note of the settings.

  Based on what you used in the soft cover, you must change the parameters of the VI until you see a signal. If you don't see something here, then obviously you can not perform a measurement. Try other examples to see if you can capture at least the waveform.

• get information from the sms message

  How to get information from sms

  ex: 1. the sender's phone number

  2. sms text

  Check the interface messages and methods like getAddress(), text, getPayLoadText.

• currently still have PP CS5.5 & want to install on another office, understand that I can only use one at a time. don't have a CD, can I get information from the current installation and a link to download PP CS5.5?

  currently still have PP CS5.5 & want to install on another office, understand that I can only use one at a time. don't have a CD, can I get information from the current installation and a link to download PP CS5.5?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

• get information from inside a trigger of the other tables in the schema even

  Addendum:
  
  ... Sorry I forgot: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64 bit
  
  *******************
  
  Hello
  
  I'm trying for a few hours to get information from inside a trigger to another table in the same pattern.
  
  My trigger is PSE_BKB. NUM_PHANTOM_BP
  
  I first tried a simple solution...
  
  
  CREATE OR REPLACE TRIGGER PSE_BKB. NUM_TR_PHANTOM_BP
  BEFORE DELETING, INSERTION OR UPDATE
  ON PSE_BKB. NUM_PHANTOM_BP
  REFERRING AGAIN AS NINE OLD AND OLD
  FOR EACH LINE
  DECLARE
  
  v_recht NUMBER (1): = 0;
  v_recht2 NUMBER (1): = 0;
  v_change_mitarbeiter NUMBER (1): = 0;
  v_recht_mitarbeiter NUMBER (1): = 0;
  v_typ varchar2 (20);
  v_obj_key varchar2 (11): = "gugus";
  v_ph_key varchar2 (11);
  -ph_key varchar2 (11);
  v_obj_keys varchar2 (4000): = ', ';
  
  anz_num NUMBER: = 0;
  anz_num_tmp NUMBER: = 0;
  anz_st_si NUMBER: = 0;
  
  
  BEGIN
  
  ...
  Select count (*)
  in anz_num
  of pse_bkb.num_objekt o
  where o.obj_key in
  (select distinct (ov.obj_key)
  of pse_bkb.num_objekt_verb ov
  where ov.phantom_key =: old.phantom_key
  )
  and o.typ = "NUM";
  
  ...
  
  Explanation: my trigger table is PSE_BKB. NUM_PHANTOM_BP.
  
  On the pse_bkb.num_objekt_verb of the table, I have a relationship 1: n to one or several object-key (field named obj_key!) on my referenced key: old.phantom_key. With this obj_key, I want to watch the weather, I have one or more lines in the table type num_objekt "NUM". So the internal selection gives me all the num_objekt_verb obj_key with my: old.phantom_key and with whom I count the number of lines I have on num_objekt with type "NUM".
  
  The problem is that the trigger does not see the table.
  
  I tried many variations.
  
  The latest version I tried was with a cursor inside the trigger definition as in the block of code below.
  
  For debugging purposes, I inserted a RAISE_APPLICATION_ERROR in the inner loop - see below. The v_obj_key variable is never defined, as in all the other variations, I tried-, I still see the predefined "gugus" in the declare section.
  
  It seems that oracle can not read other tables at this point. La: old.phantom_key is defined (in this simple example there would come a return obj_key).
  
  Thanks in advance for your help - and excuse my English.
  
  Trigger code:
  
  CREATE OR REPLACE TRIGGER PSE_BKB. NUM_TR_PHANTOM_BP
  BEFORE DELETING, INSERTION OR UPDATE
  ON PSE_BKB. NUM_PHANTOM_BP
  REFERRING AGAIN AS NINE OLD AND OLD
  FOR EACH LINE
  DECLARE
  
  v_recht NUMBER (1): = 0;
  v_recht2 NUMBER (1): = 0;
  v_change_mitarbeiter NUMBER (1): = 0;
  v_recht_mitarbeiter NUMBER (1): = 0;
  v_typ varchar2 (20);
  v_obj_key varchar2 (11): = "gugus";
  v_ph_key varchar2 (11);
  -ph_key varchar2 (11);
  v_obj_keys varchar2 (4000): = ', ';
  
  anz_num NUMBER: = 0;
  anz_num_tmp NUMBER: = 0;
  anz_st_si NUMBER: = 0;
  
  
  BEGIN
  
  
  Start
  declare
  
  cursor nums is
  
  Select obj_key
  of PSE_BKB.num_objekt_verb
  where phantom_key =: old.phantom_key;
  
  Start
  
  for the RC looping nums
  v_obj_key: = cr.obj_key;
  
  RAISE_APPLICATION_ERROR (-20099,' AGAIN 9 v_obj_key: ' | v_obj_key |) ': old.phantom_key ' | (: old.phantom_key);
  
  When the exit nums % NOTFOUND;
  
  Select count (*) in the pse_bkb.num_objekt anz_num_tmp where obj_key = v_obj_key and type = "NUM";
  anz_num: = anz_num + anz_num_tmp;
  end loop;
  
  end;
  end;
  
  Published by: user832075 on 14.01.2013 06:18

  The reason why you get count_n = 0 in tr_c is that there is no line in B with key_c = 17, to the moment you arrive at tr_c. The removal of B has already occurred, and since you're in a single transaction, the application for tr_c:

  select count(*)
    into   counter_n
    from   a aa
    where  aa.key_a in (select distinct(bb.key_a)
                        from   b bb
                        where  bb.key_c = v_ph_key
                       )
    and    aa.typ = 'n';
  

  'knows' that the row has been deleted then gets a number of 0.

  I added a set of instructions dbms_output to show the order in which triggers run, and that's what I get:

  SQL> delete from b_vw where key_a = 1 and key_c = 17 ;
  in trigger b_tr_vw
  In tr_b
  in tr_c
  delete from b_vw where key_a = 1 and key_c = 17
              *
  ERROR at line 1:
  ORA-20077: Remark: counter_n: 0 counter_s: 0 v_ph_key: 17 old.key_c: 17
  new.key_c:
  ORA-06512: at "OPS$ORACLE.TR_C", line 38
  ORA-04088: error during execution of trigger 'OPS$ORACLE.TR_C'
  ORA-06512: at "OPS$ORACLE.B_TR_VW", line 17
  ORA-04088: error during execution of trigger 'OPS$ORACLE.B_TR_VW'
  

  Thus b_tr_vw trigger is triggered first and deletes a B. trigger fires tr_b as part of this statement to remove and check against A, happening apparently so no error is triggered and succeeds the removal of B. Now tr_b_vw takes back control and deletes C. Since the B line which has key_c = 17 already deleted a control for counter_n > 0 and counter_s = 0 fails and raise you the-20002 error. Note that I'm assuming that the error of-20077 you lift is just to see the values and is not intended to be part of your actual code.

  Because I have really no idea what you're trying to accomplish here I can't offer a lot of advice that you might want to try entering two tr_c of the tr_b_vw trigger validation queries before deliver you the removal of b and put the counter_n > 0 and counter_s = 0 control under tr_b_vw to decide whether or not you want to remove.

  John

• How to get information from web interface tables

  Hello
  
  How to get information from web interface tables
  
  as in the forms... Go to help-> Diagnostics-> review
  Block = SYSTEM field is LAST_QUERY.
  
  Kind regards.

  Salvation;

  Please see the paragraphs below:

  How to determine the Table and the name of the column to a field in a form in 11i [ID 259722.1]
  How to find the query that succeeded recently? [241628.1 ID]

  Respect of
  HELIOS

• How can I get information from performance on disc with vFoglight 6.5 latency?

  Can someone tell me where I can get info from performance on disc with vFoglight 6.5 latency?

  There are also alarms that deal with the latency of disk. You are looking for a report or dashboard? Check the alarm Viewer and define a filter on the "latency". This will show you all the current latency time, then you can explore the host or logical unit number that is having the problem.

• Get information from the low level of the Subvi ni5660

  A quick explanation of the problem: I need to create several VI just to return a value of the PXI-5660 (ex: Center frequency, Span, etc.) while the entries are only a "VISA" and one "error in.»

  Detailed explanation of problem: I need to create multiple VI that the properties 'Set' or 'Get' of the PXI-5660 module (ex: the Central frequency value, get frequency, etc...).  Each VI must have a VISA in/out and in/out Error, but the only other present in/out should be the property of game/called.  Global variables are not allowed.

  One of the biggest problems for me is that ni5660 drivers do not contain a property node.  I managed to (apparently) set some of the properties by feeding only a single entry in the icon 'configure ni5660 for spectrum', but the only tool that seems to be able to output all information is the icon «MT get Attributes»  The release of 'MT get Attributes' does not contain many of the properties that I need good output.

  I tried to use the icon 'MT get Attributes' linked to "ungroup by name" which has the value "handle receiver.handles.niScope" which feeds on the reference to a property niScope node, hoping that I would be able to obtain information through the niScope 5660 (it seems that ni5660 software uses the niScope on a lower level software ", correct me if I'm wrong).  This VI finished, when put online with the 'ni5660 Initialize.vi' and ' ni5660 Close.vi, ' returned the error (-1074135028) with the explanation 'ID attribute not recognized.' ""  (The error occurred on the property node in the Subvi "Get the Central frequency")

  The goal is to make the action of PXI chassis similar to a HP8563E Spectrum Analyzer.  With this in mind, the list of attributes that I will need in the end to set and get (the separate VI) are the following: Center frequency, Span, window, number of Points, resolution bandwidth, level of reference, mitigation and time sweep.

  I apologize for my (very probably) simple question, but endless (I only started programming in LabVIEW there about 2 weeks).  If someone would be able to point me in how to make apparently PXI-5660 current property settings from thin air, I would be very grateful.  If more information or details are needed, feel free to ask.

  Thank you

  zdunn wrote:

  ....

  but unfortunately, I'm still at a loss, how to create a VI that "calls" that same property back and the fate, while using only 'VISA In' and 'In Error' as inputs.

  Located on how silly that statement. You want to create a function where (for example) you want to set the resolution bandwidth and do not want to pass as a parameter the name of the instrument. You have created the programming language that is able to read minds?

  You can use a function where you can pass a parameter in (or use a function that retrieves a parameter) or do nothing at all with the instrument. It is more complicated than that.

  There are tutorials available that can help yu with LabVIEW to learn, but I think that there are certain fundamentals means.

  Edit: Sorry, I may have misunderstood. to query does not require an entry but I don't understand what you want to query. The parameters of the instrument are all under control stripped - a program you or any other writing. Unlike a GPIB instrument, there is no one '?' command to read a rear frame. It is assumed that you know how the instrument has been configured in the first place.

• Get information from Netapp in VCOPS

  I managed to install adapter netapp for vcops and able to gather all the information.

  However, how can I have any widget showing me netapp volume/aggregate/system specific to a data store.

  In other words, using my overview of the application, I fed my vc relationship. Then I click on my store of data and I want that it show me

  health of the aggr, the lun, the volume and the system staying on the dastore. How can I get a receiver such widget?

  It can be done, but it is a custom job. It says relationship running scripts in the manual, but which requires either another adapter in relation to a request file to face the Database postgres which is JOINS the data to determine the parent/child. The problem is, you may or may not have data in the identifiers of resourcekind to make this association... e.g. canonicalname NetApp LUN to vCenter Datastore or anything of the sort... YMMV Yes. The new adapters have this logic of relationship already included, so no need to script.

  I had earlier suggested looking at the adapter of the BM NetApp IS the adapter for NetApp to go forward with the brand VMW MP getting EOL old.

  You run the old adapter EOL or the more recent SolutionsExchange (BM)?

• Get information from the Bank of Tables HZ

  Hi I mostly use CE_BANKS_V for the information of the Bank, but in case I want this HZ_PARTIES table information so how I can get because there is presented data of parties, people, etc.. i don't know which one I should mention to get only the condition information stores.
  
  Kind regards
  Shakeel Khan

  Hi Shakeel

  If you see the script for ce_banks_v, it uses the table hz_parties only. You can use the following query (this one is taken by the script of ce_banks_v only):

  Select * from
  hz_parties bankparty, hz_code_assignments bankca
  where
  bankparty.party_type = "ORGANIZATION".
  AND bankca.class_category = 'BANK_INSTITUTION_TYPE. '
  AND bankca.class_code IN ('BANK', 'CENTRE')
  AND bankca.owner_table_name = 'HZ_PARTIES. '
  AND bankca.owner_table_id = bankparty.party_id
  AND NVL (bankca.status, 'A') = "A".

  Thank you
  Serge

• How to get information from my old iPod to my mac

  I have an old iPod touch without the camera. It was on the manual settings and now I can't get my laptop to synchronize with it. I get this message "iTunes could not connect to the iPod"xxx"because an invalid response was received from the device." I tried to access from devices, but it just does not recognize. Anyone know how I can get it working with my laptop. Its fully functioning, play music and charge, but I cannot sync.

  Help, please. Thank you

  try to reset the unit.

  Learn how to reset your iPod - Apple Support

• I have received a request - think it might be an attempt to get information from me?

  / * potentially dangerous link removed by moderator * /.

  I received a request from schironize my hotmail to a global account - it read as follows: I believe that it is undesirable and I didn't click on the link as they were instructed.

  Dear * address email is removed from the privacy *,.

  We use this medium to warn you that your email account has generated errors on our MySQL database and that you need to follow all instructions that you are given in order to correct this problem.

  During our regular account verification procedure, we had a technical problem and we could not verify your information we have on record. Your account information could not be retrieved due to system errors resulting from the fact that your system has not been synchronized with the global e-mail server updated. As a result, your information we have on file is incomplete and the functions of your account are abnormal.

  About the above, you are indispensable to synchronize your account with the global e-mail server; otherwise, your access to the e-mail services will be disabled.

  We firmly demand that you click here to sync your account

  Note that failure to immediately synchronize your account with the global e-mail server will lead to permanent deactivation of your account to e-mail without warning.

  We are sorry for the inconvenience that this may cause and we assure you that everything will return to normal once you have done the necessary.

  Technical team global Email

  © 2012 global Mail Server. All rights reserved.

  It is a scam... DO NOT respond and DO NOT click on links in the message.

• Get information from my computer about the details of the graphics card and so on, in order to install games.

  From the control panel > Performance and tools > can't view and print details of the basis of the normal English Windows experience index. See below. This is what is displayed in Notepad.  The reason why I'm doing this is because I was not able to install Games 2/2, I bought. The guy at EB Games says print a list of information on the computer so that I could buy the appropriate game. I would like to have a game on my computer. My friend recommended to Doom 3. Is there something that exists and why I receive this report not readable?

  
  

  Check this similar thread:

  Printing performance information

  In the end, make sure that HKEY_CLASSES_ROOT\htafile\Shell\Open\Command is set to one of the following values, depending on the architecture of the operating system:

  x 64:
  c:\windows\syswow64\mshta.exe "%1" % *.

  x 86:
  c:\windows\system32\mshta.exe "%1" % *.

• Get information from excel to Vm description script

  Hello

  I am interesting to do a special with powershell script (if possible) who can get a data in my excel file and put it in a custom field in the description of the virtual machine.

  
  In particular, I have a lot of vm (about 800) and I have all the data of them (description, installed etc...)  in an excel file and I would put them in a custom field created with Vsphere client. Is this possible with Powershell?

  I searched the Internet but I can't see vsphere excellent... export information to excel to vcenter/esx.

  The version of vsphere 4.1 is.

  
  Thank you

  If you have an as a .csv file:

  'VM', 'Name', 'Value '.
  "scomp0016", "CreatedBy", "unknown".
  "scomp0016", "CreatedOn", '2009-05-25 10:26:30 '
  'scomp0016', 'Function', 'print server '.
  'scomp0016', 'Owner', 'Search'

  Then, you can use the following script to import annotations in vSphere:

  Import-Csv -Path VMAnnotations.csv | Where-Object {$_.Value} | ForEach-Object {
    Get-VM $_.VM | Set-Annotation -CustomAttribute $_.Name -Value $_.Value
  }
  

  The description field is not an annotation. You can set the description field of a virtual machine with the whole-VM-command Description.

  Best regards, Robert

  Post edited by: RvdNieuwendijk

• Get information from virtual hardware in Web mode

  Hello

  I have a problem in my workflow Web view.

  CPU and RAM to a virtual computer workflow changes.

  In an instant, the workflow looks like this:

  

  What I want to do is insert the CPU and the RAM of the current elected VM here:

  

  But I have no idea how do. I hope someone here can help me.

  MFG

  Patrick

  SERVUS Patrick!

  You can set "default values" in the presentation of entry of the workflow. (there is no way to include information in the tree-search-browser (from the less any documented way).)

  Here you can perform Actions, which returns the current vCPUs and RAM to the virtual machine and fills the value in the input field after selecting the virtual machine.

  to do this:

  1. create an action that returns the memory (and a second for the number of processors) of a given virtual machine.

  

  2 change the workflow, go to the presentation tab, select the numberCPU input parameter, click on the "Add property" icon in the lower section, select 'default value '.

  

  3 select the fall to the low fields to the symbolized by an arrow (ognl expression) and click on the puzzle on the right icon to select the action. filter for the name of your action, then select the 'VM' input parameter as a parameter for the action

  

  

  

  

  4. the wizard should "make" the appropriate expression of ognl

  

  5. save / finishing

  Tips: Think of the Guest OS HAL when switching between 1 and multiple vCPUs and prove the value of memory the user inserts is divisible by 4... (but not orchestrator, vsphere-questions)

  Grüße aus dem Allgäu!

  Jörg

  clicked 'send message' too early