Widows 7 error "the file is corrupt", executing a downloaded file.

Similar Questions

• Windows XP Setup error: the file ohci134.sys is corrupted?

  I was on my computer when my power cut off, and now it used to boot past the Windows XP loading screen, so I inserted the windows disk to run a chkdsk command or a repair, but I get the error: the file ohci134.sys is corrupted. Press a key to reboot the computer. »
  It won't let me access to the CD-ROM to install windows because of this error, and I can not boot past the windows loading screen! He's going to enter the safe mode options but whatever one I choose, it flashes a quick blue screen which says UNMOUNTABLE BOOT VOLUME. How can I fix?

  This is a nice article if it starts your desire to install the as option to start Recovery Console, your system and that you have a genuine XP installation CD bootable that corresponds to your installation.

  Here, the system does not start, there is no installation of the Console recovery and most people either have no real XP bootable installation CD or if they don't have one, it's older than their Service Pack installed.

  Unfortunately, we don't know anything about this system which is afflicted, except that it's a computer that no longer starts.  A little more detail would help, but that's the way things happen here in MS Answers forums.

  I just make a bootable CD of XP (no XP media required) Recovery Console and use it.

  Here's how:

  So, let's start with this:

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• When I try to run system repair ffrom originally Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt"

  Original title: when I try to run the system repair ffrom the original Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt" is anyone know the solution for this problem? Thank you, Kelsey.

  The message arrives as soon as I select "repair system" can not find the file on the Windows Dvd.

  Hello

  1. why you try to run the system on your computer repair?

  2. when exactly you receive this error message?

  If you receive the error message while booting from the Windows Vista DVD it means that the file i2omp.sys is corrupted.

  You may need to make arrangements for a Windows Vista disk that corresponds to the same edition, as it is installed on your computer. Later, try to repair the system on your computer.

  How to replace Microsoft software or hardware, order service packs and replace textbooks?

   
  Reference: What are the system recovery options in Windows Vista?

  Hope the helps of information.

• I have problem with a .iso file that when I want to use I face the error "the file name is too long.

  Original title: name of a file

  Hello

  I have problem with a file .iso that when I want to use I'm dealing with error "the file name is too long" and I can't use this file anywhere for example: vmvare ' untraiso and even if I cannot write to cd or make a boot USB.

  I don't know how fix it.how I rename the file iso, shorter that I can use?

  Please help me.

  Thank you.

  Right-click on the ISO > rename > give a short name

• Windows movie maker error - the file is not indexed and cannot be imported

  I have converted a quicktime in WMW clip, but when I try and import the video in windows movie maker, that it comes up with error the file is not indexed and cannot be imported? What does that mean?

  Try another converter.

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

• Error: the file is not a valid Java code file

  Hello

  IM new in the development of BB, so bad to describe my problem step by step:

  -First of all, had installed jdk-1_5_0_14-win, BlackBerry_JDE_4.6.0, j2sdk-1_4_2_18-win, Desktop manager 4.6

  -Open BB JDE, create a new workspace

  -Add a project HelloWorldDemo.jdp file (located in the sample folder)

  -Debug the application in the Simulator (9000-JDE) without any error

  -Construction of the project and generate the .axl and .cod files

  -Try to install this app (HelloWorldDemo.cod) in my device with error

  C:\Archivos programa\Research in Motion\BlackBerry JDE 4.6.0\samples\com\rim\samples\device\helloworlddemo>javaloader u load HelloWorldDemo.cod
  Charger Pocket RIM Wireless Java
  Copyright 2001 - 2007 Research In Motion Limited
  Connected
  HelloWorldDemo load error: the file is not a valid Java code file
  7832 bytes sent to ~ 15664 bps
  Disconnected

  -Also try to install the application with Desktop Manager and the .axl file, but show this message "a fatal error has occurred while updating your software to devices." Please try again ".

  My device is a Blackberry 8700

  Software: v4.1.0.351

  Help, please!

  Thank you!

  Thank you!! Problem solved.

• Bridges, in starting to copy files from Adobe Camera RAW to jpeg or tif, error "the file cannot be created" - can all someone please advise? No Tech phone today?

  To all

  In Bridge, in starting to copy files from Adobe Camera RAW to jpeg or tif, error "the file cannot be created" - can all someone please advise? (No phone Tech Saturday?)

  Thanks for the quick responses today from anyone in the community,

  -Mark, Portland Oregon

  Please provide details: you are not trying to change the file type by changing just the extension, are you?  That won't work of course,

  Either you try to run some type of script?

  To change a file type, you have TO open the file in Photoshop and do save as.  That can be automated.

• Parse error the file "clients.xml" Server "SERVER IP"...

  Hello

  no idea why I get this error:

  Parse error the file "clients.xml" Server "SERVER IP". Logon will continue, contact your system administrator.

  and after pressing the OK button, I get another error:

  The initializer for type for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception

  When I try to connect to ESXi 4.0 with vSphere client?

  My clients.xml file content (https://SERVER IP/client/clients.xml):

  & lt; ConfigRoot & gt; ------& lt; ClientConnection id "0000" = & gt; ------& lt; authdPort & gt; 902 & lt; / authdPort & gt; ------& lt; version & gt; 4 & lt; / version & gt; ------& lt; exactVersion & gt; 4.0.0 & lt; / exactVersion & gt; ------& lt; patchVersion & gt; 1.0.0 & lt; / patchVersion & gt; ------& lt; apiVersion & gt; 4.0 & lt; / apiVersion & gt; ------ & lt; downloadUrl & gt; https://*/client/VMware-viclient.exe < /DownloadURL & gt; ------& lt; / ClientConnection & gt;-& lt; / ConfigRoot & gt;-

  Thank you

  I bet you're under Windows 7. The customer is currently divided on 7 and compatibility modes will not help. The frustrating bit is that it works on Vista.

• I get error: "the file or the C:\$Secure directory is corrupted and unreadable" after running chkdsk.

  I ran chkdsk utility and he stopped to say that I had a hard drive error or something like that. so I cancelled it. now I get all these things popping up that says ' the file or the C:\$Secure directory is corrupted and unreadable please run the chkdsk utility.» My question is if I run it again and it stops I have to do? I also need to know why I get the installer of windows popping up for office 2003, when I already have? I tried to reinstall with a drive, but my computer won't let me?

  original title: chkdsk utility
  original title: I ran chkdsk utility and he stopped to say that I had a hard drive error.

  I ran chkdsk utility and he stopped to say that I had a hard drive error or something like that. so I cancelled it. now I get all these things popping up that says ' the file or the C:\$Secure directory is corrupted and unreadable please run the chkdsk utility.» My question is if I run it again and it stops I have to do? I also need to know why I get the installer of windows popping up for office 2003, when I already have? I tried to reinstall with a drive, but my computer won't let me?

  What you need to do before anything else, it's everything and nothing important to you and to the stability of the machine (your ability to rebuild from scratch) backup because chances are - you will be rebuilding this computer from scratch and everything on this hard drive will be erased.

• Windows 7 backup error: the file is corrupt or has been tampered with. Error code is 0 X 80041321

  After coming back to Windows 7 pro to windows 10 I'm not long able to back up my computer.  I get an error message saying: the file is corrupt or has been tampered with.  Error code is 0 X 80041321.  Any help will be greatly appreciated.

  Original title: backup Windows 7

  Hi Mark,

  Thanks for posting your query in Microsoft Community.

  I would say first of all allows you to check if the Volume Shadow Copy service is running.

  1. click on Start, type Services in start search. When the page is open, find shadow copy Volume service.

  2. right clickon the Volume Shadow Copy service (VSS) and check whether it is started.

  3. If it is stopped, select Start or restart.

  Check if you are able to backup.

  Step 2: If you have installed a third-party security software, then try to temporarily disable the security software and check what is happening.

  Step 3: You can also try to remove the task from the location:
  
  C:\Windows\System32\Tasks

  How to find which task is damaged or altered.

  3. click on Start; Search type cmd in the list on the start menu, programs, right click on cmd and run as administrator.
  4. now run the following command

  schtasks/query | findstr /i

  Search:

  ERROR: the task image is damaged or has been tampered with.
  ERROR: task cannot be loaded: the task name

  Find the name of the task, try deleting the task name, and then try to recreate.

  See the link below that solves your problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/dcb0fb2b-d1e3-4562-823f-cee16bfa4945

  1. click on Start, type Task Scheduler in the start search box, and then click Task Scheduler in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. in the Actions of the Task Scheduler dialog box, click on create a new task.

  Check whether the problem is resolved.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows 7, Sysprep after getting an error "the file or directory is corrupted and unreadable."

  When I run Sysprep on this Dell Latitude E6520 with Windows 7 (x 64) professional, then boot into Windows PE to create a picture, he said "the file or directory is corrupted and unreadable."

  I made sure to restart 3 times before I ran sysprep this time because this is the 2nd time I got the error above.  Every time it reboots normally and the question obviously didn't happen until I ran sysprep.
  The last time I had to delete the partition and re - format and start over. Fortunately I took a picture of this time right front of sysprep.
  I even tried the Windows 7 installation disc to repair the MBR and the boot record, but he said he couldn't fix it, and he can't read this partition at all.
  I thought also it could be a bad drive on this computer brand new, but I ran the diagnostics on the hard drive and there are no errors.

  Because of the scope of your question, which is a professional information technology associate, its best that you publish in TechNet IT Pro forums to receive the best support for your question:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• Mocha Ae error: "the file is corrupt or in an unsupported format."

  So I try to use 'Track in Mocha Ae' inside After Effects. The problem is that whenever I try to import video files into Mocha Ae, it does not read my video files and always displays this error message:

  "The file is corrupt or in an unsupported format".

  I looked for a solution by myself, and I downloaded QuickTimes as some experts explained in the other panels of the question.

  However, even if I open the video with QuickTimes, this error still showed upward.

  Shows the file type '. '. "MTS", just for you give more details on this video file.

  I was wondering what can cause this error. Someone HELP me please!

  Mocha does not natively support MPEG files. You must convert the file. This has nothing to do with Quicktime at all. I recommend you read as moka files help on what formats it supports indeed.

  Mylenium

• Get the 5 error: the file is open

  I'm having a problem with my VI. I want to create a file every minute and write at a high resolution for this minute. Then after the minute is made and im writing to another file, delete the file I wrote it just to. I can create files very well, but when it's time to delete a file, it gives me "error 5: file is open ' I read that there is a refernce open and that's why it does not work, but from what I can tell, Im closing all references.

  I have a Win 7 computer, using the C - DAQ to acquire data, and everything works fine except the Remove feature. I have attached my vi for you to look at and would appreciate any help in this matter.

  Thank you

  
  

• error the file name with accent passed to GetFileDate()

  Hello

  When passing a file or a file that belongs to a path that has one of its names of folders containing a character accentuated to GetFileDate(), I get an error of library function (return value == - 1). For example, all the files in the folder 'Eéprom' return an error. Can anyone please help on how to solve this problem?

  Thank you!

  (LabWindowsCVI 9.0 / Windows 2000 / CVIRTE2009)

  Basically, you only add an additional line of printing to your function that creates the BAT file.

  Similar to this:

  fprintf (bat_file, "@echo off\n");

  fprintf (bat_file, "chcp 1252\n");
  fprintf (bat_file, "dir/s/b a - D \"%s\\*.*\"" > \"%s\"\n ", directory, TxtFile);

  This should set the code page of the console in which runs your BAT file, so that the dir command will be able to output the accents properly.

• Error: The file has properties that cannot be copied to the new location

  Hi, I have a problem when copying the files in my windows 7 PC to my Sansa clip 4 GB of sport.

  This error appears when I transfer them to any folder on my sport Clip:

  Are you sure you want to copy this file without its properties?
  The file has properties that cannot be copied to the new location.

  I can click Yes or not (when I click Yes, the file is copied to the new location)

  The reason why I ask is the following:
  The file will be somewhat different after being copied on my sport Clip?
  This is a file audio subliminal message to help me overcome some mental problems, so it would be bad if the file is modified after copying...

  The file plays perfectly and sound quality seems very good.
  However, I still need to know if the file is modified in a way?

  The device is correctly detected, but in the manual it says that when you go into my computer and click on the Sansa Clip Sports, you must click on a folder in the internal memory and then you will find a folder of music.

  But it is not at all a folder in the internal memory...

  When I click on Sansa Clip sport, I see these folders:
  Sound, music, audio books, Podcasts, playlists.
  AUDBOOK. LIB, AUDIBLE. LIB, M3U. LIB, MUSIC. LIB, PODCAST. LIB, version.sdk

  Thank you in advance, I really hope that someone will answer you

  The file properties check the metadata associated with the file.  This error occurs generally when the file was created on an NTFS volume and some of the assosiated with this file metadata is not supported on a FAT32 volume. What you mean actually is not associated with file properties, so it would not be changed.