Widows XP does not connect to my network.

Widows XP does not connect to my network. (wired or wireless) The network is functional and all I can understand is ipsec driver service could not start because the specified file is not found. I tried to reinstall the drivers for my wireless card, an external wireless adapter and plug it directly into the router. It detects the network but will not connect to it.

This could be caused by a virus.  What application antivirus do you use, and is up to date?

In particular, see tcpip.sys.

There are probably several copies of this file on a typical system of Windows XP.  The copy of 'work' found in C:\Windows\system32\drivers with a backup copy in C:\Windows\system32\dllcache.

You can have additional copies in C:\Windows\$hf_mig$\KB951748\SP3QFE and C:\Windows\$hf_mig$\KB2509553\SP3QFE

Assuming that your system is up-to-date, the tcpip.sys version should be 5.1.2600.5625.  It should be 353 KB (361 600 bytes).

You might consider doing a virus scan online with, for example, http://www.eset.com/us/online-scanner/ or download and analysis with the multi-AV tool of David Lipman, which you can find here http://www.multi-av.thespykiller.co.uk/

I also suggest to download, install, update and equipped with a system full scan with two of these free tools:
Malwarebytes AntiMalware
SUPERAntiSpyware

Tags: Windows

Similar Questions

  • My UK 6s iPhone does not connect to the network in Germany?

    My UK 6s iPhone does not connect to the network in Germany?

    'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?

  • Hello my iPhone 6plus does not connect to the network on the upper left side of the screen it ust say research

    Hello my iphone 6plus does not connect with the network on the upper left side of the screen it say research

    Have you ever tried troubleshooting mentioned in this article?

    If you cannot connect to a cellular network or cellular data - Apple Support

  • My daughter's iPad does not connect to my network, although mine don't?

    What to do when the ipad to my daughter does not connect to my network?

    You talk about your Wi - Fi network? If a single iPad of your daughter does not connect while other devices are working properly, the first thing to do is to reset the Wi - Fi router. Powering the devices iOS and computers connected to your wireless network. Then turn off the router. Wait 30 seconds and turn on the router. After it finishes its startup routine and shows a good access to the Tower of the internet on your iPad, etc..

  • My computer does not connect to my network... !!!

    Hi, my Dell laptop (Inspiron 1420) work properly after that only after a certain time he reported that the wireless card will not work correctly. Now, the laptop does not connect to my network more, even with cable LAN, I checked the Device Manager and I found a yellow exclamation on the Microsoft ISATAP #2 map then I double clicked it only to discover in its properties of this statement, "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Well, I try all I can, but the problem is still there, and the laptop won't always connect to my network, please anyone has an idea as to what I could do please answer as soon as possible. tThank you.

    Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

    Try without commitment TCP/IPv6:

    If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

    http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

    See you soon.

    Mick Murphy - Microsoft partner

  • My computer still does not connect to my network

    I don't know why, but my computer still does not connect to my network. I think that I have is that one day google chrome sayd that something has stopped. It was something about the proxy options. He finds that google chrome could not find any proxy... ehhhh thing. I don't know what his name. but can you guys please help me about this?

    :)
     
    Original title: network problem

    Hi Jakop

     

     

    Thanks for posting your query in Microsoft Community.

    According to the problem description you provided, I understand that you are facing in network problems in Windows 7. I will certainly help you in this matter.

     

    You use a wired connection or wireless?

    Please follow the steps in the link.

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    If you face problems more when working with Windows Mail on the Microsoft Community Forum.

  • Want 4520: Hp Envy 4520 does not connect to the network

    4520 nine will recognize my home network and I put the password correctly, but it does not connect.  Went all out and under tension, but without success. Never had such a problem with other devices. I printed a diagnostic of the printer which suggests some issue with MAC address filtering on my sky router but have never enabled MAC address on my router filtering - a) would not have any idea how he b) have never had this problem with other devices then why now? Help please

    Hello

    Download and run the Installation Wizard of HP printer from the link below to install the printer wireless.

    www.HP.com/go/Tools

  • Vista does not connect to the network at startup folders

    Unlike XP, Vista is not automatically mapping/connecting to my WiFi network at startup folders.  Every time I have start or restart, Vista does not connect to them, and I have to manually complete the task.  All folders that I want to connect to are marked "Reconnect at logon."  How to get Vista to connect to these folders when connecting as it is supposed to?

    Hi Peters4,

    I have some questions I need to ask:

    Once have connected you to the computer, you still see the disks with a red X on them or they have gone completely?
    If they have the red x, connects by double-clicking on them?
    If you are prompted for a password?
    You map drives using an IP address instead of a name of sharing?
    Are you using the built in Windows Vista wireless client or other software to connect to the wireless network?

    You could try the following drive mapping and see if that fixes the problem:

    • Press Start.
    • Type CMD in the Search box and press ENTER.
    • Right click on cmd.exe and select run as administrator.

    At the command prompt, use the following command:

    net use x:-\\nom_ordinateur\nom_partage\ / persistent: Yes

    (where x is the drive letter you want to assign.)

    Brent
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • T61 does not connect to the network through a station

    I have a T61hat all of a sudden this week the network connection has stopped working when I am connected through my docking station. If I remove and plug the network cable into the T61 it immediately connects, but when I first connected it does not connect. It was working fine earlier this week. I was reading some email in Outlook and suddenly realized that I had lost my network connection. I tried to run the utility Lenovo system update and the updates of Windows and I'm perfectly up-to-date. A virus scan that found nothing. I tried to uninstall the driver of my network and then restart and allowing PnP to reinstall. None of this has worked. Also, I have a partner who has also a T61 with a docking station. I plugged my laptop on my own and got the same results, so this isn't a hardware problem with the docking station itself.

    Our technicians of equipment replaced the motherboard in my T61 and that seems to have solved my problem. Haven't seen the network problem in a week now.

  • Satellite A200-244 does not connect to wireless networks

    Hello
    I bought a Toshiba Satallite A200-244 a few months back. It worked falwlessly with my Virgin internet router from the beginning, but suddenly I am disconnected during navigation. I was not able to connect to the network since. It shows the network when I try to connect it says * unable to connect * I diagnose the problem, but still does not work. I know somethings wrong with the laptop, because the other companions of House have no problem connecting to the network.

    I tried the things:

    -Put the router for 30 seconds and then turn it back on.
    -Updated network adapter drivers. (Intel PRO/Wireless 3945ABG)
    Search - forums but they all say of the complicated stuff related to the register and all, tried what ever I could catch.

    Tech gurus out there, please help me!
    Thanks in advance

    Checked settings in Windows? Maybe there's something wrong in the configuration DHCP network or something.

    Turn off the router, unplug it from the power source, wait about 10 minutes, plug in the power supply and turn it on.

    If the problem persists, you should load the router factory settings. Then after you should check, if the router and the wireless network adapter using the same standards.

  • WIN8 does not connect to the network of 5G

    I have a laptop Sony Vaio 13 Pro. Since late September, I was connected on a 5G network with her. I upgraded to Windows 10 5/6 weeks ago (not sure exactly when). 5G network worked a few days, and then one night it disconnected and never once I connected again.

    I tried each installer for the driver, all set to update (Windows updates, driver updated AND updates from Sony) and nothing.

    So yesterday I drove back on Windows 8, because according to a Microsoft agent, with the fact that I've been on the cat may be a compatibility issue with the driver and Windows 10. The laptop still not connect to the same 5G network that worked before without any problem. It would only connect to 2.4 G.

    Here is some info:

    Network adapter: Intel (r) Dual Band Wireless-N 7260, the driver was last updated. When you run the test Command, it shows radio for n and g networks.

    Since I downgraded to Windows8, I tried everything I could find on the community page:

    -a ran the adapter and network troubleshooting which gives me an error message: Windows could not automatically detects the network proxy settings.

    -Flushing the dns, no go

    -renew the investigation period, no go

    -disable the network, reboot and activate, still no go

    -all the proxies are disabled

    -tried to manually set my ip no, still does not

    -netsh int reset newspapers done, reboot still nothing

    -with still Win10 on I got the network card uninstalled with removal of the driver and reboot, no victory.

    The network is detectable on the list of my networks, at the same time, there are about 4-5 other devices on it, and works on everyone like a charm. The router Admin shows the operational network.

    I'm going nuts on my work stuff if pretty darn slow on 2.4 Ghz network.

    Hello

    If you right-click on the adapter in Device Manager and select Properties, you can see tabs for energy, advanced, etc...

    There, you can look around for anything that might be disabled or disabled...

    If it used to work in 8 win and it will not now, which makes me think it may be failed, but there is a possibility that something happened...

    Look to see if there is a setting for the 2.4 and 5...

    Maybe somehow the 2.4 is set as default...

    Now that I think of it, it is possible to have a framework like this in your BIOS...

    My HP laptop has a few buttons just above the Panel to turn off the wireless and other things... You could check of course make sure that something like that can not have been moved somehow and changed a setting...

    I don't have anything with dual band to check a little closer...

  • 1st install ESXi does not connect to the network

    I used VMware Fusion and several versions of the workstation. I am a computer SCIENCE student and I'm trying to set up a virtual server for the purpose of learning environment.

    First, I installed ESXi in workstation computer on my laptop. I scare IT LIKED. I ran to the store bought a fresh HDD to install ESXi to my old server Supermicro (MBD-PDSMA + o LGA). During installation, I received a warning that the Intel Virtualization has been disabled on my motherboard. I activated that can restart the installation. No matter what I try I can not this 'thing' to get an address from my DHCP server. I even tried unpluging my router and using several computers on my network as DHCP servers. Each of them I tried my entire network has received fresh IP address but my supermicro box did not. I tried to use two network, port 0 only ports and only 1 port. After having lost about 24 hours I tried to install 5.0.0 and it worked without problem. I would like to be able to update the latest versions unmolested my network connection is going to die on me when I do.

    Ideas?

    My next issue will be storage because not even my JABOD drives appear in my passthrough RocketRaid 2220 and PCI does not seem to be an option for this card. Yep, that's good baby PCI - X... Say what you want about RocketRaid, this card was sitting at the bottom of a box of son with no static case a few years to 3-4 moves and it still works like a champ.

    I had the same problem with a card mother similar supermicro who has the same Intel Lan Adapter as yours.  Using the e1000 drivers of 5.0 worked for me.  I followed the instructions in this thread:

    http://communities.VMware.com/message/2115391#2115391

  • Constantly identified LAN connection, does not connect to the network or internet

    I had a problem that suddenly appeared today after a reboot.  As the title says, my connection to the local network is constantly switch between "id", "enabled" and "network cable unplugged."  I can't connect to my network or to the internet.  This is what looks like my ipconfig:

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :

    Wireless Network Connection 4 Wireless LAN adapter:

    The connection-specific DNS suffix. : ftrdhcpuser.com
    Link-local IPv6 Address...: fe80::ed16:e41c:9df2:e2eb %
    IPv4 address...: 192.168.1.65
    ... Subnet mask: 255.255.255.0.
    ... Default gateway. : 192.168.1.1.

    Tunnel adapter ISATAP.ftrdhcpuser.com:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. : ftrdhcpuser.com

    Tunnel adapter isatap. {6254AE81-CEFB-477E-8E90-D451A4E96163}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :

    Card tunnel Teredo Tunneling Pseudo-Interface:

    The connection-specific DNS suffix. :
    IPv6 address...: 2001:0:4137:9e76:c24:38bb:
    Link local IPv6 Address.....: fe80::c24:38bb:b88e:49 b 7 1%
    ... Default gateway. : ::

    Tunnel adapter isatap. {095FED9F-64DE-4677-8CF8-A07B0B386792}:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :

    I tried to uninstall and reinstall the realtek drivers (both automatically and with the realtek official .exe file for current drivers).  I tried to assign a static ip address for ipv4 properties, and I tried activation and deactivation of my ethernet controller on my bios, all with no success.

    I have ping 127.0.0.1 to see if my material is bad and shut up just fine (0 packets failed).  I tried to move the ethernet cords, and that did not help, then I connect my ps3 through ethernet to ethernet port of the same on my router and my router port-light lights up fine for that (but not with my pc).

    I'm really at the end of my rope here.  Any help would be appreciated.

    Yes, I saw that... but I don't know what I have choice.  This is clearly an ISP issue, and I've exhausted all my options on my end.

    I finally managed to pass on to someone, and they send me a new modem/router... naturally it is the one and only free modem I get "for the life of your contract."  But hey, if all goes well, if nothing else, he will have the ability to save and load a configuration file.

  • After hibernation PC does not connect to the network until the 'Diagnose' button

    My PC Win 7 x 64 did for about 6 weeks, and it's a little annoying:

    After waking up from hibernation, there is no network connection. I'm behind a router and it gives IP addresses. The problem looks superficially like the IP is not renewed... but this isn't the issue of the root.  If I open the network and sharing Center, my network card and click on "diagnose" everything started working. Here is the text of the event log.

    If I configured the IP to be static (on the area no DHCP on the LAN), then the LAN adapter will not recover a hibernation. It is as if she is locked inside.

    Someone at - it ideas (or how can I run the Diagnostics of command line)?

    The Network Diagnostics Framework completed the stage of diagnosis of the functioning. The following repair option was proposed:

    The helper class name: AddressAcquisition

    Cause: your computer has a local IP address
    You might not be able to access the Internet or some network resources.

    Root Cause Guid: {245a9d66-ae9c-4518-a5b4-655752b0a5bd}

    Disturbances: reset the adapter "Local 2 network connection"
    This can sometimes solve intermittent problems.

    RepairGuid: {07d37f7b-fa5e-4443-bda7-ab107b29afb9}

    Seconds required for repair: 70

    Security context required for repair: 80

    Interface: Connection to the network space 2 ({748a5fd8-c314-482a-8ced-b0923a1ec97e})

    Hello

    Select the network option while the computer is in hibernation.

    Number of similar questions:

    http://en.community.Dell.com/support-forums/network-Internet-wireless/f/3324/p/19447805/20099948.aspx

    http://forums.Dlink.com/index.php?topic=47470.0

    http://justaddwater.dk/WP-content/uploads/2007/07/Lenovo-wireless-problems-after-standby.PDF

  • Phorosmart d 5510: printer does not connect to the network upgrade

    A combination of problems:

    I recently updated my broadband and also bought a new computer

    Today my printer has stopped working. I tried to reinstall, but my desktop computer, or laptop can connect with him. I checked this is the connection to the server, but it will connect with the SSID of 2.4 ghz. WiFi on my computer works with the SSID of 5 ghz. I guess that's the problem, but the printer will not recognize or find the SSID of 5 ghz

    Hello Dudley151,

    Thanks for stopping by the HP community! I see that you are facing problems with wireless connection. You have changed networks and are unable to get the connected printer.

    Yes, the problem is HP printers are not compatible with the 5.0 GHz networks.

    To get a better understanding, take a look here: wireless printing Center

    I hope that answers your question.

    This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

Maybe you are looking for

  • Windows Update, error 80200010 # WindowsUpdate_dt000

    The message referenced above is the error in trying to fill three 3 important updates to my computer, I received.  Two 2 updates installed correctly and completely, however, one (1) does not.  In chicking on icon troubleshooting he, I will put this e

  • Dolby Home Theater & Clear.fi media causes bluescreen

    I recently formatted my Aspire v3 - 771 G and has a few problems, I've not had before. When I try to update Clear.fi Media it crashes (BSOD). When I try to start Dolby Home Theater, it hangs too (BSOD). Tried to repair install Acer eRecovery Manageme

  • Windows Photo Viewer not work windows 8

    Hello! I have a problem with my windows photo viewer after that I installed updates and restarted my laptop I can't open the .png and .jpg pictures. And even my vlc Media Player does also not more even if i reinstalled several times already. The upda

  • loading multiple SWFs with addChild without blinking in the meantime

    I have a shell that pulls in a swf Flash file.  When you click the next button, it takes in the next swf file.  I have numbered the swf files so that they to 1.swf, 2.swf, etc..  Everything works fine except their this blinking between removing the o

  • How to disable this icon in the unit?

    This icon is displayed in mode Unity, how to disable?Thank you!