WiFi 802.11n

Similar Questions

• 5 Ghz WiFi 802.11n support

  I'm considering the purchase of HP Pavilion dv7-6056, HP Envy 17-2000 or HP Envy 17-2050. But I understand that all of these PCs have 5 GHz WiFi (802.11n) support. I see other HP have the ability to change the WiFi card. Is there WiFi cards with 5 GHz support available for these models?

  This widget could not be displayed.

• Satellite A-L50-18r - WiFi 802.11n standard is not available

  I have a Toshiba Satellite L50-A-18r with a Qualcomm Atheros AR956x Wireless Network Adapter wich suports wifi 802.11 b/g/n, but no more than 15 to 20 Mbps to 50 Mbps, I can't send my router.

  Also, in advanced options for the wireless adapter there are 802. 11B only option.

  How can I activate 802.11n to get faster.

  What operating system do you use?

  Have you tried to update the driver WLan?

• x 220 Wifi 802.11n problem

  Hello, I have an 802.11n question that drives me crazy...

  My X 220 with 6205n Wifi adapter cannot connect to the router in N mode.

  The router is a huawei HG655b, using WPA2-PSK/AES. All my other computers at home can connect N, but the X 200 mode.

  It connects only in mode b and g, as soon as I N mode swith the 220 X of the card from the Device Manager, it disconnects.

  I updated the Wifi driver to the latest version of the Lenovo site, I changed power options on battery and Ac for maximum performance for Wifi... what else could be? An incompatibility with the router?

  Problem solved.

  Had to update the firmware of the router.

• iPod touch 4g can not find wifi 802.11n

  If I put my 723v Speedport router to 802. 11A / n wifi only, my ipod touch 4 g can't find the network.

  (Worked well for the ipod when the router is configured for 802.11b/g/n, but has been annoyingly slow on my Macbook Air of 2012 then)

  I understand that the ipod touch 4g supports the standard right, wifi-n? So why he can not find the router when the value of a/d only?

  801.11n can be used on the band of 2.4 GHz and 5 GHz band, but 11n is not necessary to support the two bands simultaneously.

  Setting your router to 802. 11A / n (apparently) means, use only 5 GHz band with support from 11A and 11n.

  (11A uses 5 GHz only)

  However, iPod touch 4G can only use 11 b/g/n on the 2.4 GHz band. He can't see 5 GHz Wi - Fi signal.

  (11b and 11g use 2.4 GHz only)

• DV7-1245dx: computer laptop dv7-1245dx: update to card WiFi... Need for 802.11n

  I have a HP dv7-1245dx laptop AMD with a Wireless G Wifi Atheros ar5007 card. I want to update my WiFi card for 802.11n more speed fast and really would like if I can get bluetooth at the same time the new wifi card. Any IDE?

  In case anyone is looking for a solution... I did some more research and found that a

  Atheros AR5BXB92 AR9280 HP 482260-001 wireless adapter

  works very well.

• Satellite A665-11Z - WLan 802.11n WIFI slow

  Hello

  I'm having this problem with my network is SO slow (sometimes disconnects without reason)...
  I mean it's really really do so irritating! (point of wanting to break the laptop-.-!)

  I have:
  Realtek PCIe GBE Family Controller
  Broadcom 802.11n
  (This is the latest version)

  My 2 sisters have other types of PC Toshiba laptop... but they do not have the same problem as mine...

  I tried to change power saving (max performance)<------ didn't="">

  I've looked in the internet & it had a solution saying to
  implement the Broadcom (or other device) to 802.11n 802.11 g... but I don't know how to do...

  So please! I mean PLEASE! Help me Dx... I can't really handle it...

  Thank you ^^;

  > I tried to change power saving (max performance)<------ didn't="">

  After that you first thread, it worked:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=237951

  > I've looked in the internet & it had a solution saying to change the Broadcom (or other device) 802.11n to 802.11 g... but I don't know how to do...

  Go to-> Wlan card device manager-> properties-> Advanced tab
  Switch from 802.11n to 802.11.G
  Click ok
  Reboot the laptop

• WiFi IEEE 802.11N/G/B Wireless USB 2.0 Wireless Lan USB Adapter WIFI 150Mbps adapter network driver

  where can I find the driver for my wireless card? Here is a link to his http://www.amazon.com/Wireless-802-11N-150Mbps-Network-Adapter/dp/B00333F2YU/ref=sr_1_8?s=electronics&ie=UTF8&qid=1364471402&sr=1-8 description

  Hi Brian,.

  Thanks for posting your question in the Microsoft Community forum. I understand that you want a driver for the wireless card. I'll help you with this problem.

  We can refer to this article and check if that helps.

  Install a wireless network card: http://windows.microsoft.com/en-in/windows-xp/help/networking/install-wireless-network-adapter

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• Satellite L650-11R - broadcom WLan 802.11n does not

  Hello!

  I had some problems with my internet and everything trying to solve this problem, somehow I uninstalled my network card and its drivers.

  After that (I reinstalled several times), unit is here, but it says in Device Manager that is activated, but when I go to the device in network settings, it says that it is diseblaed and its painted in grey (I clicked, window opens saying "enabaling"... but nothing happens after that). Also, I know that of not work beacause it does not find my home WIFI network and other devices in the House are connected to the home network. In the right corner of the screen there is red ' x'.

  Also, when I run windows repair to see what is the problem of network it says that my network card is probably bad drivers and I should change that.

  I tried a lot of drivers for broadcom 802.11n on the internet, but nothing seems to work.

  My laptop is Toshiba satellite L650-11R
  network card: broadcom 802.11n
  am on Windows 7 64 bit home edition

  Help me to find drivers or tell me how to install correctly with corect NIC drivers.

  Please help, thanks in advance!

  I solved my problem. All the drivers that I tried to install worked

  The real problem was antivirus, I uninstalled Zone Alarm security and now I have internet!

• Qosmio G50 802.11n enabled but does not work properly

  Hello

  I get a new Qosmio G50 on Christmas and now I have a little problem. I use a draft N of D-link access point and I want to use 802.11n mode with my qosmio. But I have some problems with it. I activated the 802.11n mode in the peripheral band Manager and channelbandwidth 2.4 & 5.2 are both set to "auto". But I don't get the 300mbps, 60mbps is what I get. My father has a portable computer from a different manufacture with also a 802.11n wireless card but not Intel and other mobile, I get the 300mbps! I put books together in the same room, the other get the qosmio 300mbps varies from 1 to 81mbps or more.

  -Does anyone know what goes wrong or what I need to change something in the Device Manager? I heard that many other intel WiFi 5100 owners also do not receive the speed of 300mbps.

  can someone help me?

  Greetz

  Have you tried turning off modes of 802.11g/b/a by assigning "802.11n only?

  Access device wireless LAN settings in Device Manager to change these settings.

  Remember not that 300Mpbs speed signal. Actual data transfer speed (less overhead) is less than 100 Mbps

• Satellite L650 - what is the maximum rate of WLan 802.11n?

  Hello!

  I have a laptop Toshiba Satellite L650-11th with broadcom wireless card.

  The driver installed is version 5.60.48.35, dated dated 21/01/2010, which looks like the most recent available at Toshiba.

  However, Windows 7 indicates a rate of connection of only 65Mbps.
  With an another Toshiba that I have, with an Atheros chipset, I get 135Mbps.

  The broadcom 802.11n only does support 20 MHz channels?
  Is it possible to configure it to use the 40 MHz channels?
  How?

  In addition, the network search, I found a broadcom WiFi driver in HP site with version 5.100.82.130 (May 25, 2012).
  It would help to install this driver, or would it be a bad idea?

  Thank you
  Paulo

  Hello

  The wireless network card supports 802.11 B G N standard

  You should read this info:

  + Can use the 5 GHz on the wireless network card in the standard WiFi "n". +
  http://APS2.toshiba-tro.de/KB0/TSB0502VM0000R01.htm

  Usually, the standard 802.11 N standard supports 2.4 Ghz and 5 GHz but 5 GHz are supported only if the WLan card would also support a standard 802.11.
  802.11 is not supported, the 802.11 standard operating at 2.4 Ghz

• HP Pavilion HPE h8-1111: Deffective Network Connection (802.11n WLAN Broadcom adapter) - defective or software hardware

  I lost my network connection and I don't know where to go to fix it. If anyone has an idea where ho to continue, I have tried so many stage already that I am at a loss... Help

  My computer semi regularly acted by the loss of my internet on a whim. Basically, it can detect WIFI, no problem, shows the strongest signal for her also. just tells me that it cannot connect to WIFI when I try (even if he can ask me the password and can tell if I use one bad)

  I can't reprocude the question

  No significant changes to my computer because the issues started happening.

  Simple steps:

  -Recovery (before the first event) system does not alter

  -Router and modem are not the issue

  -Could you find not updated driver anywhere (even though this does not mean that they do not exist, but having only no internet with the pc makes it particularly tricky - also HP does not provide the )

  -Power management wasn't the question

  -J' tried forget network the many times this problem has occurred. He has not fixed it.

  Additional troubleshooting showed:

  -Reset the Winsock Catalog did not resolve the question more than once (emplying he did the first time I did).

  -Reset of TCP/IP, that does not solve the issue more far.

  My WIRELESS card is a Broadcom 802.11n

  Finally, the only thing that I can see (although I can easily miss something obvious) is my reinstallation of an old printer inkjet EPSON Workforce 545, which I am connected to my WIFI and my PC via USB (why I used wifi since I got cable?...) I do not know) a few days later, people who use the same network reported the act more as usual but I have not noticed anything on my end.

  -J' have been disconnected from the network to the printer and stopped using it.

  -J' found evidence of his feature wirless allgedly interfere with other devices here (search for entitled Review "bought two units for corn or work")

  http://www.CNET.com/products/Epson-workforce-545/user-reviews/

  -Usage guide also mentioned the possibility of non-zero of the interferingwith printer wireless (end of p.328) other devices:

  chrome-extension://oemmndcbldboiebfnladdacbdfmadadm/https://files.support.epson.com/pdf/wf545_/wf545_ug.pdf

  Edit 12/04/2016

  I ended up having to do a factory reset on my computer for unrelated reasons. To reconnect the original WLAN card, I don't have to use the USB adapter that I bought to solve my problem.

  Factory reset works if fails everything else! Solution without after all!

  Hiya

  Well I'm really ideas, I have revised the HOW2 and he is shown below, just in case it helps.

  

• Is Satellite A660-156 supports the IEEE 802.11n standard?

  In my laptop Satellite A660-156 in Windows 7 shows Device Manager that you have installed the card WiFi Broadcom 802.11n, but your site Internet officially supports only wi - fi b/g standard?
  This laptop model really does support 802.11n?

  Hello

  As far as I know the Satellite A660-156 was equipped with the chip BROADCOM BCM94313-HMC WLan.

  I have goggled a bit and found information different s; some chips support only 802.11 B and G and some chips seem to support the standard 802.11 N as well.

  I think you can check this option in the Device Manager-> card WLan-> properties-> Advanced tab.

  There, you should check if 802.11 N is available too.

• WiFi 802.11 b, g, n (2.4 GHz and 5.0 GHz), why is the razr not able to use 5 GHz?

  I was wondering why we are not able to use 5.0 GHz, does make a difference? Totally, I do not know. Maybe you guys can help me. Thank you!

  (please not all values are estimated and not 100% accurate)

  The only advantage on the 5 GHz will be noticed if you're less 1 mtr from the router once you pass the 1mtr threshold you will lose any advantage in speed so your phone will automatically be seleect the 2 GHz band.

  5 GHz bandwidth may push your wifi connection up to 300Mbit while 2 GHz is limited to about 190Mbit

  but on 802.11n distance plasys much of the speed you will actually recive therfore in the case of mobile phones there is no great advantage in the phone, a connection of 5 ghz as if you where to walk away from your router 3mtr aprox you up to 180Mbit in speed is (in my opinion) main reason why phones do not hold a connection of 5 ghz for a long time.

  the 2 ghz range will be a higher speed over a longer distance (this is on 802.11n)

  However if you have an 802. 11 a router then the benefits of the 5gzh is capped at 190mbit however, you can hold a stronger signal over a longer distance compared to 802.11n the problem here is that the routers are configured more to computers and personal computers portable therfore so they droped the 802. 11 a band and open until the speed 802.11n short-range can on long distance, is no great loss because your device will automatically change to load of bands on your remote (this can be demonstrated by your router at 5 GHz to lock if it supports doing so)

  and you will also notice that your razr connect to band 5 GHz in the present case.

  In required short is correct in the statement there is no advantage to 5 GHz running more than 2 GHz.

  I hope this explains a little about your problems.

  Kind regards

  Kristian

• Extending Airport Extreme 802.11ac with older Airport Extreme 802.11n

  I need to extend the coverage of my wifi and I have an a 802.11ac AE and two former, 802.11n AE units and all are still functional.  Specifically, can the newest Airport Extreme 802.11ac extended by an older Airport Extreme 802.11n if it is connected by ethernet cable?  If it can be done, what setting (bridge mode or extend the network mode) should be used on the 802.11ac model?  Any other need to know the tips would be greatly appreciated as well.  Thank you...

  can the newest Airport Extreme 802.11ac be extended by an older Airport Extreme 802.11n if it is connected by ethernet cable?

  Yes, it's can... goal that the wireless "ac" will not be extended, of course. Here, I assume you think 802.11ac airport your 'main' airport and airport 802.11n as the airport of their extension.

  which parameter (bridge mode or extend the network mode) should be used on the 802.11ac model?

  You would not change the settings on the 802.11ac airport

  Reset an 802.11n AirPort Extreme back to factory default settings

  Connect an Ethernet cable from one of the three ports on the airport of 802.11ac for WAN "O" from the airport on the AirPort Extreme 802.11n which extend the LAN network<-->

  Configuration to use Apple "Assistant" to put in place the AirPort Extreme 802.11n and it will feature the correct Assembly for you.  Everything you really need to do is assign a name that you want to call the airport and "Wizard" will take care of everything else.