Wifi button does not work after upgrade to windows 7 to windows 8

Similar Questions

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

  Hello

  I upgraded the PC host, but also virtual machines to Windows Pro 10.

  TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

  Is this a known issue?

  Thank you!

  Kind regards

  Joe

  SOLVED!

  
  

  I uninstalled VMware Player, including the abolition of the configuration files.

  
  

  re-installed VMware Player and it worked!

• Envy 15: Airplane Mode button does not work after update of Windows 10

  My airplane on my HP envy mode button will not work after the upgrade to Windows 8.1 for Windows 10. I can turn on and off airplane Mode but not the button. Grateful for the help

  Hello:

  The only suggestion I can offer would be to see if installing the W10 wireless button driver solves the problem.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_150986_1&swEnvOid=4192

• Pavilion dv6 sd card reader does not work after upgrade to windows 8

  Hello

  My card reader SD HP Pavilion dv6 does not work after windows 8 upgrade (6 months ago). Previously, it was working fine when I was with Win 7 (which is the default OS with this laptop).  I don't find the device in Device Manager (under the peripheral system or hard drives). Read the similar section in the HP forum, but it did not help as much as the device is missing in this case. Can anyone help?

  Hi SanSam.

  Thank you.

  Install the driver from Realtek for Windows 8 card reader.

  Please post your results.

  Best regards
  ERICO

• Acer Aspire M5-481TG - card reader does not work after upgrade to Windows 10

  Hey!

  I can't get my card reader works after upgrade to windows 10 64-bit...

  Device Manager gives me return error Code 48, tried to install different drivers, I have found for Realtek PCIE Card Reader... None of them work...

  "Code 48: the software for this device has been blocked from starting because it is known to have problems with Windows.

  Have you ever tried the Realtek website?

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  Please uninstall the driver installed before installing this, on right click Device Manager, choose uninstall, and check the box uninstall the software too.

• Satellite L750 - WLAN does not work after upgrade to Windows 10

  After the upgrade from Windows 7 to Windows 10, internet Wifi don't work do not. Unrecognized WiFi. Seems that the driver for the wifi does not work with windows 10. Any ideas please?

  Dear Jolgas,

  It seems that the problem of driver. You should installed driver WiFi for window 10.

  Thank you
  Solène

• Pavilion dv7: Wireless does not work after upgrade to Windows 10

  After the upgrade to Windows 10 Wireless does not work, even if the wireless symbol F12 shows blue. In the network settings, the wireless switch exhibits & cannot be turned on to.

  This feature worked perfectly in Windows 7

  No worries.

  Thanks for the actual name of the product from your laptop.

  Let me take a look.

  I will edit this thread to let you know what I found.

  The Intel Centrino Advanced - N 6230 is a wifi adapter that is compatible with your book which has Windows 10 drivers available. the driver is on the following link.

  https://communities.Intel.com/thread/59710?start=0 & tstart = 0

  You can replace yourself because it is easily accessible after removing the cover of the hard drive Bay. See page 21 of the manual at the following ADDRESS.  http://h10032.www1.HP.com/CTG/manual/c02842278

  I saw them on eBay for @ $20.00 USD

  http://www.eBay.com/ITM/new-Intel-Centrino-advanced-N-6230-Wireless-WiFi-Bluetooth-combo-card-62230ANHMW-/170958962681

• Remote does not work after upgrade to Windows 8

  After that I have improved my Revo Rl70 to Windows 8 the supplied remote control does not work with Windows Media Center or XBMC. No response to any button press on at all. LED on the remote flashes, but that's all. I tried to install the eHome device, but not luck. Also changed batteries in remote.

  Need help.

  Solved!  See another thread.

  http://community.Acer.com/T5/Acer-all-in-ones-desktops/how-do-you-get-the-Revo-70-remote-control-to-...

  Riad says:

  Had the same problem on the same hardware, found these posts was very angry and solved the problem.

  I am running Windows 8 Pro 64-bit - clean install (and not an upgrade) and same remote

  Here's how:

  1. Download "FIR_ITE_5.1.0.8_W7x86W7x64_A" from the Acer site

  (Select Windows 7 64-bit)

  http://global-download.Acer.com/GDFiles/driver/FIR/FIR_ITE_5.1.0.8_W7x86W7x64_A.zip?acerid=634614370...

  2 extract the downloaded ZIP file to your. Do not run the Setup program.

  Navigate to the folder... FIR_ITE_5.1.0.8_W7x86W7x64_A\FIR_ITE_5.1.0.8_W7x86 x64\INFDrv

  3. double-click on the reg file called "InstallRegistry.reg" to import the configuration. Be sure to meet all guests Yes OK

  4. restart your PC

  5. If should start working just after you log on, but you need to run the "CIRAP.exe" file that is located in the same folder that REG file it.

  Steps above should work if you the devices work correctly:

  Check open your device manager:

  The Panel\All Control Panel Items\Device Control Manager

  and make sure you have no exclamation point on some unknown devices

  You should also see two devices in the list under "Human Interface Devices"

  (SIO2) ITECIR infrared receiver

  and

  Microsoft eHome Infrared Transceiver

  It worked for me earlier so it should work for you too.

• Satellite L850 - Bluetooth does not work after upgrade to Windows 10

  After the upgrade of the W10, BT did not work so I updated the drivers Atheros AR3012 version 10.0.1.1

  It still does not work. My phone can see the laptop on BT, but says that he cannot communicate with him.

  The laptop does not tosee phone & Yes the phone is discoverable. My BT headset can not be seen now by phone.
  All this worked fine with W7

  My laptop is Satellite L850 (PSKDLE)
  Any ideas?

  Hello

  In most cases, BT does not work due to lack of BT software.
  I guess you will need to install the filter for the BT driver package.

  In most cases the 8 Win / filter package 8.1 Bluetooth driver should work under Win 10... Then try to install the Atheros Bluetooth driver filter package and check to see if you will be able to activate BT

• Trackpad and keyboard does not work after upgrade to Windows 10

  Trackpad and keyboard do not work after the upgrade to Windows 10 in Boot Camp on a MacBook Pro in early 2011. So, I'm unable to enter password. How to connect? Can I go back to Windows 8?

  1. you can turn off your Mac and your power it back up and hold the Alt/Option key.

  2. you can also run the following procedures to restore the OS default.

  3. If you use a Mac 2010 to run W10, officially Apple does not support the combination. Older than 2012 Mac is not supported for the W10.

  4. Please see also Boot Camp: the operating system default value .

• Micro does not work after upgrade to windows 10

  My microphone does not work in any software after the upgrade to windows 10. Stakeholders do not seem to work.

  The device says the latest drivers are installed (Conexant SmartAudio HD). I uninstalled and reinstalled, but the microphone still does not work.

  Thank you

  Solved it by downloading the latest drivers finally found here, not the default driver installed by windows 10 who said he was the most up to date.

• HP Pavilion dv7: RealTek Cardreader does not work after upgrade to Windows 10 10

  After the upgrade to Windows 10 64-bit of Windows 7 64-bit, the Realtek PCIE card reader does not work.  Device Manager showed initially a card reader driver error, but after the reboot, I can not find an error or the device itself.

  Any ideas would be apprieciated.

  Hello:

  See if the driver installation of W10 directly from Realtek card reader solves the problem.

  First driver on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Inspiron 1464 bluetooth does not work after upgrade to windows 8

  After windows upgrade 8 I couldn't find the bluetooth and the driver for windows 7 does not work... pls help

  Hi Deepak,

  Thanks for posting your query in the Microsoft community!
  I understand your concern and know it must be very frustrating. I will guide you on this.

  I suggest you to download and install the latest drivers for chipset/Bluetooth from the manufacturer's website. If there is no windows drivers 8, then install Windows 7 drivers in compatibility mode and check.

  Follow the steps to run in compatibility mode:

  Method 1:

  (a) access to the start screen

  (b) press Windows key + C on your keyboard to show the charms (if you have a touch screen: touch the right edge of your screen and slide your finger to the center of the screen to display the bar of charms)

  (c) search for Troubleshooting, click settings in the right-hand column.

  (d) click on troubleshooting. Click run programs made for previous versions of Windows

  (e) click on Next, select not listed. Click Next

  (f) click Browse and select the driver file you downloaded.

  (g) click on Next, click program troubleshooting

  (h) check the program worked in earlier versions of Windows but won't install or run now

  (i) click next , select the latest OS known functional for this (probably Windows 7 driver

  (j) click Next

  See the link which is shown below:

  http://www.Dell.com/support/drivers/us/en/04/product/Inspiron-1464

  Method 2:

  I also suggest you to visit the links listed below.

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device #section_4

  See also:

  What happens if a device is not installed correctly? :
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  It will be useful. If the problem persists, please do not hesitate to answer. I'd be happy to help you further.