WiFi Compaq DC7700 CMT card

Similar Questions

• Compaq DC7700 CMT: Power supply Assembly for dc7700 cmt

  I got a HP Compaq DC7700 CMT (convertible minitower) and want to install my XFX XT power supply in it series.

  It seems that the holes for the screws may be different. No power supply is available for the side by side comparison.

  If anyone can check that?

  and, is it possible to install a "standard atx" PSU in this dc7700.

  If Yes, what should be done.

  The XFX PSU adapts physically, and it seems that the connectors on the motherboard are all compatible.

  My only concern right now is if the new XFX PSU moved to the back of the tower.

  I count on the installation of a hard disk with Windows7 on it, two spare HARD drive as the network maps and graphs updated

  Your correct, the PSU do not line up.

  What has been done in the past, it is what is in the photo. You just made an adapter plate.

  Be aware that only the Legacy graphics cards will work.

• HP Compaq DC7700 CMT Desktop - latest version of the BIOS

  Hello

  (1) I know the latest version of BIOS for HP Compaq DC7700 Convertible Minitowers desktop PC?

  The current system of Information is given below:

  Name of the operating system: Microsoft Windows 7 Professional
  Version: 6.1.7600 Build 7600
  Model: HP Compaq dc7700 Convertible Minitowers
  System type: X 86-based PC
  Processor: Intel (r) Core (TM) 2 CPU 6400 2.13 GHz, 2133 Mhz, 2 Lossnay, 2 logical processors
  The version of the BIOS/Date: Hewlett-Packard 786E1 v01.10, 13/04/2007
  SMBIOS Version: 2.4
  Physical memory (RAM): 4.00 GB

  Kind regards

  SV

  Hello:

  When you download the BIOS file that is run, and the first thing that will pop up is a set of web page - and the instructions for all the BIOS flash methods.

  I like the easy way to format a USB drive in the file system FAT 32, copy the contents of the flash BACK to the usb flash drive folder, plug the flash drive on the PC, start PC, tapping on F10 key to access the BIOS at the beginning of the HP welcome screen and using the 'Flash ROM system' menu in the BIOS.

• HP Compaq dc7700 Convertible: I want to set the sound card

  I have HP Compaq dc7700 Convertible Minitowers PC computer (REF: RV742EC) and the operating system is windows 7 ultimate and I want to set the sound card, I want to help?

  Hello

  Please try:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=wk_128612_1

  Kind regards.

• Compaq dc7800 CMT: PCI and PCIe versions

  Hello everyone, I want to install in my pc (Compaq dc7800 CMT) into the slot one SATA controller card PCI or PCI Express.
  So I would need some information:

  What version are PCI slots (for example 1, 2.2, 3,...) and the pci express x 1 slots (for example, 1.0, 2.0,...) of the motherboard of this computer?

  This motherboard is adjustable to boot from a drive connected to a SATA PCI or PCIe controller?
  Thanks in advance

  Hello

  You can see in the patterns of chipset and the plug.

  PCI Express x 1 1.0 (500 MB/s) but is difficult whether the BIOS can be started PCIE SATA Adapter

  Intel® Q35 and Q33 Express for laptops

  Concerning

  

• Convert Compaq 7100 CMT from XP Pro to Windows 7 Pro.

  Title: Convert Compaq 7100 CMT from XP Pro to Windows 7 Pro.

  Hello everyone. The Windows XP Pro on my Compaq 7100 CMT is replaced with Windows 7 Professional (32 bit) using a system OEM disc that I bought in a PC shop. The computer is 3.2 GHZ Intel Pentium 4, 2 GB ram, HDD with a 320 GB Seagate 7200 RPM ATA serial / min. plug some additional computers, Compaq 7100, WCL PP255US, s/n system {removed privacy}, {removed from privacy} inventory number Council ch h 0968, bios hp 78 1 v01.05 16/06/2004. Physically disappears the 40 GB hard drive with XP Pro and the 320 GB drive (currently 1 player) will be used as drive 0 and Windows 7 Pro is installed. He probably won't be partitioned into two drives. A Windows 7 Upgrade Advisor report was generated for this computer, and is the main concern of this report, "virtualization technology is not supported, this PC does not support hardware virtualization assisted". As you know that this statement refers to the XP mode which is optional for Windows 7 Professional.  My question is what material makes this PC not support for virtualization technology, and this PC can be modified to support the necessary hardware. I'm a novice at this sort of thing so maybe I do not understand what that means here the report. In addition, another concern of mine is how will the PC really run Windows 7, it will be too slow for example. I would appreciate your help and comments.

  Thank you

  Oscar

  Hey, Oscar:

  There is no processors VT supported for the dc7100, so activation of VT in this machine is not going to happen.

  If you have integrated Intel card, is not entirely Windows 7 or Vista capable.

  Here is the link to a graphic driver for laptop that will allow the graphics acceleration and a change in screen resolution, but you won't have Aero under any circumstances.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=447371&prodNameId=447348&swEnvOID=2096&swLang=8&mode=2&taskId=135&swItem=ob-47264-1

  You download and run the install file. It will be the error. Close the error window.

  You will need to manually install the driver by clicking on the VGA adapter in Device Manager. Click on update driver driver. Select travel it my computer for the software method and navigate to C:\SWSetup\sp34749. Make sure that the include subfolders is selected and the driver should install.

  Otherwise, you can buy a video card compatible windows 7 (PCIe x 16 2.0), who will work in your diet 345W specifications.

  Paul

• HP dc7700 cmt

  Hi, last storm we had here has released all 3 of my pc, blown motherboards, my hp dc7700 usdt, I had no problem replacing the Board of Directors, he was up & running fast, not bio no problem more...  I replaced the Board in my dc7700 cmt 2.8 mhz, 250 GB sata, xp pro and I get the micro code must be renewed, I press F1 to start and it starts every time, but I think I need some step by step instructions on how the organic Flash, I know not how to change the startup disk and the sequence to install drivers and downloads for her read up on it for a few days and Im puzzled evertime I'm coming to how change the startup disk and change the files it contains, I need a program to edit the files on the disk? is there a cd already loaded with 786e1 firmware I can buy?  also have the same problem after replacing the Board im my hp compaq d530 cmt 3.0, xp, sata 500 GB and it will not even start for xp configured

  I had read the instructions on the firmware update info file.

  I did my best to explain the process.

  As I said, it would be a challenge.

  I have not had any problems to do once I got the right tools for the job that I have provided to you.

• HP compaq dc7700 convertible m: hp compaq dc7700 convertible minitowers no display

  Hi ive just got out the attic of my old pc, not connected my monitor and theres no display at the entrance.

  I remember having the same problem when I got it about 6 years ago first lol, I noticed in the box there is an adapter I plugged the wire in and then put it in another port (don't remember which) and display on monitor

  Problem ive got now is I seem to have lost this adapter and do not know what it is that I'm actually looking to buy another. Any ideas what it is?  Every day spent online search with no luck not even save the loft trying to find

  Thanks in advance

  The DC7700 CMT has a standard VGA video output and the only non - VGA card is the DY674A, this card would require an adapter to use a standard VGA monitor.  Look at the back of the DC7000 and monitor cable plug. Is this correct?

• IPhone 6 can connect to WIFI without a sim card?

  6 IPhone can connect to WIFI without a Sim Card?

  knitfly wrote:

  6 IPhone can connect to WIFI without a Sim Card?

  Yes, assuming that the iphone 6 has already been activated.

• HP compaq dc7700 minitowers: Microcode error: no evolutionary device drivers/no pass

  I upgraded my HP compaq dc7700 Intel e6400 CPU (2.13 ghz, 1066 MHz front side bus) to the intel e6700 (3.2 ghz, 1066 MHz front side bus) and did a clean install of Windows 10 pro at first boot. I noticed that it gave an error, namely 1801: firmware does not support this CPU or something. I pressed f1 to continue installing Windows, my plan was to install the firmware update later. After Windows has started, I created a bootable USB to install the firmware of the HP drivers and software section. But when I tried to install the firmware update, it didn't work! I just typed in flashbin.exe, as shown in various posts on this forum. It gave this error: "error!" There is no valid drivers on media or three are no evolutionary device in this system. »
  So I tried som other options at the start of the installation, three was something like: f8 to activate the increased processor, which basically is what I needed. But when trying to install flashbin.exe, he gave the same exact error, although I didn't have any options before I could type. See all: https://www.dropbox.com/s/q4eo8qqp49gohc9/IMG_20160227_153036.jpg?dl=0 (without pressing f8)
  
  https://www.dropbox.com/s/xw60pryzq30ta4q/IMG_20160227_155457.jpg?DL=0 (with pressing f8, I selected Yes everywhere)
  
  Do I need additional drivers? GPU, mouse, headset, everything worked without having to download anything extra!

  If you were able to get to a command prompt and had copied the contents of the firmware flash folder on the drive back, so you could get to a command prompt and run flashbin.exe, then it shouldn't matter.

  I helped that another Member of the forum for 3 days to finally get her to work on his dc5700 E7200 (uses the same firmware as the 7700 update).

  Here is the discussion.  The firmware update worked after he reinstalled the original processor.

  http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/1801-microcode-error/TD-p/5511686

  I don't know if this procedure works on the Wolfdale E6700.

  It does for all the Wolfdale E7200-E7600.

  No one has ever posted this problem with the Wolfdale E6700, then you are the first I know to try to pass by this.

• HP DC7700 CMT: Simple Communication controller

  Windows 8.1, it is impossible for me to do a residential group to set the homegroup code...

  The message is: change the location of the home group network, but it seems there is no option to change this.

  On the other hand in the material, I find that the Simple communication controller is not recordnized, if it has something to do with it?

  The system runs on Windows 8.1 WMC edition

  I like it much solved these problems...

  Here is the information about the hardware:

  HP model: HP DC7700 CMT

  s/n: [personal information deleted]

  p/n: ET088AV

  Search partnr.   AG397AV

  Hello:

  The PCI Simple Comms controller must the driver HECI found under Vista Business 64-bit driver downloads on the support page for your model, which I can't access for some reason, or I would have posted the driver.

  Look under the section Chipset driver.

  I guess the support site is low (which seems to be a regular occurrence).

  You may need to manually install the driver.

  I can't help you with the problem of the homegroup, but has nothing to do with the missing pilot.

• HP Compaq dc7700 SFF PC can be upgraded to support a 2.66 GHz Intel Core2Duo (E7300) processor?

  My HP Compaq dc7700 desktop PC small form factor is equipped with a processor replacement of Intel Core2Duo 2.66 GHz (E7300), Stepping/CPU ID 10676, but I now have a start-up error message: "1801 - Microcode patch error.»  Missing or not valid processor updated Microcode.  "Please contact Hewlett - Packard Company for a new firmware update to support the new processor Stepping.

  (The computer start in pressing 'F1', but performance deteriorated due to invalid processor Microcode Update).

  I sent to HP, but have yet to receive an answer.   (They may have bigger problems right now!)

  The HP documentation for the dc7700 is ambiguous about whether if an E7300 processor would be sustained.  In this regard, the documentation recommends against editing processors more than 95W, but the E7300 is only a 65W processor (exactly the same as the original processor E6300).

  I've updated the PC system BIOS (786E1, Rev 1.16, the most recent available on the HP relevant support Web page):

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en & cc = us & prodNameId = 3232108 &...

  "(mais malheureusement, il semble que Rev 1.16 n'inclut pas une mise à jour de Microcode valide pour le processeur E7300)."

  It seems that I may need to wait and hope that HP will issue a valid and new Update Microcode for the E7300 dc7700 support page.  (With luck, the update of firmware would be included in an update of the BIOS which can be implemented through the windows, not via a legacy floppy!) 

  (I note that Intel provides an easy firmware update, but it is not easy for those who are running a Linux Enterprise operating system.  I am running Windows Vista Business 64-bit).

  This is my first post.  Thanks for all the tips on the problem that I outlined above.

  Thank you Paul and Frank,

  The evidence you presented against compatibility has begun to address substantial.

  Furthermore, it is probably not conclusive in itself, but Intel motherboards with a chipset Q965 (at least the names of the Council containing the string '965') also do not appear to support beyond E6700 processors...

  http://processormatch.Intel.com/COMPDB/SearchResult.aspx?BoardName=DG965SS

  I'd be happy to call my request 'resolved' - has answered in the negative.   Thanks again and well done! to each of you.

  With gratitude,

  Robert...

• Satellite P10: How to enable the WiFi of Intel 2200BG card

  Hello

  I have a psp10e Satellite that I recently installed a WiFi of Intel 2200BG card. After having problems to light up I put the Ribbon on the PIN 13 on the map to turn on the radio.

  I have installed all the latest drivers / BIOS updates and spend hours searching the Internet I am still yet to find a cure for the hardware switch/fn + f8 and the WiFi led to work.

  Is there something that everybody has understood to make the switch/led work material? There must be a better remedy than a piece of duct tape! It is the BIOS that has nothing to do with the hardware switch?

  Hello

  You isolated the correct pin code? With the 13 PIN is pin 7 when you look at the map. And unfortunately there is no biosupdate for these machines, because everything is 'wired', then you will need to follow the alternative route...

  Sorry man

  Welcome them

• Can I sync my calendar with my wife without a credit card

  Can I sync my calendar from the iPad with my wife without a credit card

  You don't need a credit card, a calendar sharing.

  read here: iCloud: overview of calendar sharing

• How can I correct "processor not valid update firmware" I have a compaq dc7100 cmt

  My m/c is a HP Compaq dc7100 CMT (DX438AV).

  I replaced the processor 2.8 with a P4 HT 3.4 ghz 1 M/800 SL7PY, when starting, it gives the message "missing or not valid processor microcode update.

  My motherboard is ch h 0968. My Bios is...  Version: 786 1 v01.05

  I looked at the form of the Commission and I think that it supports this chip, can anyone help with this problem

  Thank you...

  Thanks for the help, I installed this firmware and also updated the bios to lasest 2.12 (I think)

  and the problem is solved