WiFi connected but browsers and mail stop working

Similar Questions

• BRAVO: Wifi connects but can't reach Internet

  Just recently my Wifi stopped working properly, anywhere except for home. The phone displays an active Wifi connection, but I can't get anywhere. It still works fine on my Wifi at home. I did not any changes to settings and it is always set to use DHCP to get an IP dynamic task. I tried to have the phone "forget" a network and it relearn, but which did not help. Any suggestions?

  Thank you - dcedte

  Deletion (aka. "forgetting") the unsecured Wifi networks 'remember' solves the problem. When the phone connects again to these networks, it works now.

  dcedte

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• HP ENVY Phoenix 810: Tiles and charms stop working

  Tiles and charms stop working. When the tiles stops working (by clicking tile on causes Office Office window to scroll) and I could still access the charm of the research, I ran sfc/scannow as administrator. He showed a couple of corrupt files, he couldn't fix, but on reboot, the tiles and the charms worked again. Have experienced this on four times at this point.

  Seems to have started with the last Windows 8.1 update and is somehow related to the engine OneDrive of synchronization.  I hadn't used onedrive; started using it, and this mess. I disabled all settings onedrive pc and laptop and stopped using it. However, the message "Synchronization engine OneDrive" appears for no apparent reason, and then the tiles and charms stop working.  If I have Outlook and Foxfire open apps, they still work, and their open windows always appear in the toolbar at the bottom. All other app shortcut links that have normally pinned it disappear.

  When I try to shut down the PC, if I can do this via the charm of power, I get a message that it cannot be closed because the "Portrait Display Inc. app prevents close.» There is no such program indicated in the list of installed programs in Control Panel. I understand computer Googling there somehow integrated in the HP PC.

  It is a HP Envy Phoenix 810, with a monitor (not touch) HP, both purchased December 2013. 8.1 Windows running automatic updates; using McAffee All - Access AV, up-to-date. Standard desktop applications. No software of Dingo.

  I see that many other people have had this problem, used the approach of the sfc/scannow, with little lasting effect.

  Plnjmw, welcome to the forum.

  If you have configured the Windows system restore, I suggest go back to a restore point before you started having the problem.  This will tell you if the update is the problem.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• I installed a sniper art called game of victory, but it has now stopped working he won't play no more

  I had a game on my laptop called sniper art of victory but it has now stopped working and I can't get it working again. the loading of the game at the level that I saved my game to but then when I go to start the game where I recorded home everything stops and I get a message saying that the game does not run correctly, and windows has stopped, so what could be wrong with the game

  Hey paul bell bond,.

  There could be several possible reasons for this.

  Try to get the game settings to the 'Factory Defaults'. For instructions on how to do it please contact the vendor of the game. Delete all of your temporary files and see how it goes. To do this, run Disk Cleanup.

  See the article below:

  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Another application could also be in conflict with the game. Perform a clean boot procedure to verify if this is the case.

  Please follow the steps listed in section of the knowledge base on how to achieve this.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  As a last resort, you can uninstall and reinstall the game. It should work.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• Hello, I'm testing cc2015 Adobe Premiere Pro, I use it for my videos, but now it has stopped working. When I start it, it says ´´Premiere Pro could not find any video game capable modules´´

  Hello, I'm testing cc2015 Adobe Premiere Pro, I use it for my videos, but now it has stopped working. When I start it, it says ´´Premiere Pro could not find any video game capable of modules´´ and I don't know what to do, I saw a cople of solutions for mac, but not for windows ;( My PC: Intel core i5-4460 3.2 GHz, Nvidia GTX 760 2 GB, 16 GB of RAM, Windows 8.1 thank you for your attention and please help me!

  Hi PepeF,

  You have AVG installed anti-virus software? If so, disable or uninstall.

  Thank you
  Kevin

• Updated to 3.6. Extensions and themes stopped working. Updated to 6.0. Still does not work. Returned to 3.6. No dice. Renamed all the extension. Still does not work.

  automatically upgraded to Firefox 3.6. Extensions and themes stopped working. Updated to 6.0. Still does not work. Returned to 3.6.20. Still nothing. Renamed extension files still nothing. Help. everything worked great until the upgrade. Thems like Noia and Adblocker Plus still do not work.

  To help other users find solutions, please return to this Thread and log in to the forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!

  My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!

  Hi Kareyfabela,

  For this kind of problem, I strongly recommended opening a pension with Apple iPad case will probably require inspection by an Apple engineer. You can open a file on this site: https://www.apple.com/support/contact/

  I hope this helps!

  Jonty

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• What changes hardwear and software stop working playready

  What changes hardwear and software stop working playready? I don't want reformat my drive again and reinstall windows because of this problem of playready.

  Thank you

  (1) use the http://support.microsoft.com/kb/976590 ResetDRM to reset your PlayReady DRM

  (2) run Windows Media Center. Update of PlayReady through tasks, settings, TV, TV Signal, PlayReady update.

• Since the Adobe Acrobat update in may on my Samsung GalaxyTab S android version 5.0.2 calculations (add, subtract and multiply) stopped working with pdf forms.  Same shape works well on laptop.

  Since updating Adobe Acrobat app in may on my Samsung GalaxyTab S android version 5.0.2 calculations (add, subtract and multiply) stopped working with pdf forms.  Same shape works well on laptop. Form calculations are still working fine on the laptop using the same forms.  Also worked fine on Samsung Tablet before can update the app.

  Hi herb,

  The calculations do not work as they use Javascript to perform the operation and version 5.0.x Lollipop has problem with Javascript that is fixed in the version 5.1.x.

  Thank you

  Abhishek

• Keyboard and mouse stop working at the login screen, but work very well before he gets to connect.

  My keyboard and mouse suddenly stopped working today, I was pressing F11 to try to get the system to boot from a recovery screen and it wouldn't, but when he returned to my screen connection and requested my password it won't let me not use the mouse or the keyboard, I wonder if I accidentally turned off something and if anyone knows how to turn it on turn it back on. I'm using vista on a HP dv5

  Thank you

  Hello Djc618,

  Thank you for your message.  You have a friend or a family member that can allow you to use a keyboard to see if the material can be defective?  You can also try using your keyboard on another computer, if this does not work then you probably have a bad keyboard.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• WiFi connected but unknown network and internet access

  Hello

  I think I've read enough forums and done enough research I finally post my question. My other laptop is Dell Inspiron 1545. It connects to my home network, but says unknown network and no internet access. I tried wifi and ethernet cable. The IP address is set to auto detect, I have reset the router, reinstalled the drivers for the card wifi, without success. Any ideas?

  -Taylor

  Only, I solved this problem on my Dell XPS, so I decided to share with the community.

  After the call to Dell and discover my warranty had expired (a little more than one year) and knowledge it would cost me $129 to get a response from time, I decided to go look for solutions. I found a thread of 2009, attributing the cause to a thing of access network Mcaffee. I knew that's the question because I don't personally like the major anti virus makes (they tend to pull up of stunts like this) so I had ripped my PC McAfee, as soon as I started. But this thread has helped me understand how to solve this problem.

  The problem seems to be an Agent of network access Protection on your system configuration (your start up programs). Make sure it is off. It wouldn't hurt also to try to disable the Internet Explorer ETW Collector Service (has a name shady so I nuked it too: P). this fixed my connection problem not identified immediately.

  Follow these steps (Windows 7):

  1. click on start.

  2. click on search at the bottom bar.

  3. type: msconfig

  4. press enter

  5. you should have a new window named System Configuration

  6. click on the Services tab.

  7. scroll down until you find: Network Access Protection Agent. It will be defined as stopped. It's normal.

  8. uncheck the box next to the network access Protection Agent.

  9. click on OK.

  10. restart your computer.

  Your internet connection should work now. If this is not the case, repeat the procedure until step 6, and then follow these steps:

  1. scroll down until you find: Internet Explorer collector Service to ETW. It will be defined as stopped. It's normal.

  2 uncheck Internet Explorer collector Service to ETW.

  3. click on OK.

  4 restart your computer.

  If these two steps don't fix your problem, go back to the Configuration of the system (Services tab) and it look for any other Network Access Protection Agent, such as Macafee named ones or something similar. Please be aware that uncheck essential services can cause pc problems, so make sure you know what you're unchecking before you do. If in doubt, feel free to google it.

  Another solution would be to temporarily disable your antivirus and firewall and see if that helps. If Yes, then you know where you need to focus.

  Good luck and hope it works!

• HELP blackBerry Smartphones: I BIS, but BBM and Gmail only works on network and NOT on wifi

  Hi all, sorry in advance if this problem has already been postponed.

  I myself recently had a bold 9900. Everything worked well, but I met a pretty big problem which I spent hours looking for fix on the internet today, but nothing helped. So I decided to make an account on here to see if anyone can inform me personally with a solution. My carrier is O2 (UK), but I use the sim card while living abroad in Czech Republic. I don't meet with this problem on my previous BB (torch).

  I buy a monthly BIS data plan and it is still active at this moment - it is clear from "EDGE" that appears at the top right of my screen when the network is enabled or "3 G" (with the blackberry icon) .
  When the network is running - my BBM, Twitter/Fb apps, Gmail, browser all works fine (as it should) because of my BIS.

  The problem:

  Once I turn the networkand activate wifi WE, my BBM and Gmail work & the BB icon disappears from the top corner, instead of move slightly down to accompany the icon of intensity of the wifi (which would always be the case on my previous BB) right.

  What is even more strange, given that BB icon is still missing, is that my BB Facebook and Twitter apps still work fine with wifi on, just like the Explorer... So why not BBM and Gmail?

  (Which makes me ask: I thought that the BB Facebook and Twitter apps necessary BIS to work?)

  Anyway, once I enter the 'wireless network' > menu > 'Troubleshooting' > "Wifi diagnostic", the following errors are displayed:

  (1) UMA connection error. Status: Error of wireless network

  (2) infrastructure blackberry connection error.

  I tried to return the directories of service, which made no difference.

  Help, please!

  Well Yes, I tried yesterday (restore to factory wireless settings) does not. I have now restored the mobile to factory settings and I'm relieved to say that the BIS now works just the wifi.  

  Thanks for your advice anyway.