WiFi connected but no internet access

Good so far, didn't have any problem with internet on my mac mini.

It connects to my ADSL hotspot and mobile phone, but I can't access the internet or browse.

In Network Diagnostics it says "internet - failed" and "Server - failed".

These connections work on my laptop and mobile.

I tried several times to change the DNS, reset the modem and fiddling around with everything I can that could possibly help without result.

I forgot to add that the internet is perfectly fine in recovery mode

Tags: Mac

Similar Questions

  • Satellite A-C50-1KQ - WIFI is connected but no Internet access

    Hello!

    Today, I bought a laptop TOSHIBA SATELLITE of C50-A-1KQ and my problem is:

    When I am connected to my Wlan status says I'm "connected" to the Internet and everything is ok, but I don't have an Internet connection. With a cable, everything is ok, but not with Wlan.
    My driver for the card is 10.0.0270 (17.10.2013).

    Can U help me pls?

    Siana

    When you open option networks make sure airplane mode is set to OFF, Wi - Fi on IT and I guess that your WLAN is also in the list.
    You have the signal full force and the State connected?

    What happen when you try to open a page in the Web browser?

  • Excellent strengh of WiFi signal but no internet access

    I have a toshiba laptop with built-in adapter, adapter works fine with any other wireless networks that I connected without any problems at least 5 or 6.

    I have recently implemented a new network with new aol wireless router, a thompson speedtouch. The network is working properly and shows full signal strengh and connectivity, but I'm unable to access the internet.

    Other mobile home access the network perfectly, even if mine is the only laptop with Sp2! Is this a problem?
    I know very little technical jargon and saw hundreds of messages on google and this site, but none were of no help. I've done many things, but all seem to lead to ip/config - what happens with the error message - media disconnected and a timeout message and something about dhcp?

    Another path leads me to the "repair of the ' cannot complete this task and stop saying:"cannot renew ip address"." I downloaded the updates of microsoft for SP2, tried to update the driver for the card but tells me I have the latest firmware. Am completely stuck, reading around is not an uncommon problem, common but responses are not seeming to help me.

    Anyone with any help whatsoever would be amazing!

    Hello

    I also read on the net that sometimes if SP2 has been installed it of not possible to access the internet via WiFi network.
    AFAIK the SP2 installed and activated the firewall. Therefore, you should check if the firewall is disabled.
    In addition, the update of the driver may solve your problem.
    Check your WLan card driver version and if necessary, download and install a new one.

    The other possibility is that you have enabled filtering router's MAC address. Please check this box.

  • BlackBerry Z30 Wifi - connected but no internet

    Hello!

    I m new to Blackberry and just received my Z30 (that I really like a lot!)

    I still have a problem with the wifi connection. I managed to connect to my wifi router. In the settings, I see that the connection is active. The signal is good.

    But on the top bar, I still see the 3G icon (instead of the wifi icon). I also received a message that my wifi has only limited access to internet.

    I know the router works, because all my other devices (for example the laptop I m typing this message on) do not have access to the internet.

    Are there special settings, I have to check on my blackberry z30?

    I found the wifi settings advanced with a lot of technical information about the wifi connection - which, this information, if I post to help solve my problem?

    Thank you very much for your advice!

    Try to go to settings network connections and disable data services and then try to reconnect to the wifi

  • Equium P200 status 'connected' but not internet access.

    I have an Equium P200 and finds it difficult to connect to a wireless network.

    I have the wireless key and all the information is correct.
    Status is connected to the network, but I have no internet access and the message is: connection to the local network only.
    I live with two other people who have access, but I can't access the internet.

    How can I change this?
    Thank you.

    Hello

    Please check in the WLan settings if the TCP/IP protocol settings are set to automatic.

    Usually, the WLan router supports a range of IP addresses and assigns an IP address to the laptop of the range of IP addresses.

    You can find this setting here:
    ->-Connection network WLan-> properties > network connections (TCP/IP) Internet Protocol-> properties

    Also, check if your WLan encryption settings are right!

  • WiFi connects but no internet

    I recently updated my iPhone 5 iOS to 9.2.1 and confronted to this wifi problem.

    To ANY wifi network, even after having connected and authenticated successfully, I get no internet access. Open a browser, I see an error "unable to connect to the Internet.

    I tried 3 different wifi connections and I face the same problem. (Haven't checked the internet works on the Wifi for other devices, including my laptop)

    I tried to forget the network and return home, reboot the iPhone several times. Do not reset the network settings and lose some 25 + WiFi password that I saved on my device.

    Note: the wifi never worked for me after this Upgrade.

    Try going to settings-> General-> Reset-> reset the network settings.
    It's the only way you will fix the problem probably.

  • Connected but no internet access (E1200 with laptop Acer Win 7 x 64)

    Whenever I come back from a stay in a motel, there are problems to be connected again to the House.  This time, I show that connected to the network wireless 2, but no. Internet access connection.  Yesterday, I figured it out and got things, but today it happened again and I don't get it.  See network properties properly, including appropriate security key.  When I ran Win 7 Network Diagnostics, he returned that I didn't have a valid IP address.  I have reset the router and even unplugged for a minute.  All this time, the ' currently logged on: "network in the sys bar icon showed the Summit he was trying to connect my network name to the internet (downstairs, the network showed as connected, probably by a router).  Another thing I did was to support IP services and disable and stop, then after restart it a few minutes.  Nothing.

    But wait!  As I finished typing the last sentence, about an hour after I started the laptop, the first time, I opened center network & sharing once more and suddenly between the name of my computer and the Internet has shown the name of the network, instead of "no internet access."

    So, what could be going on here?  (1) why should he take 50 minutes to make the connection?  (2) why do I have problems every time after the use of wireless network from a motel?  Thank you

    Update: resolved for now.  I started using the safe mode with networking, which required the implementation of msconfig as F8 does not work.  Which required a repair of the system, and then restore it, and finally I was able to follow the instructions at http://forums.techguy.org/networking/950031-cant-get-valid-ip-address.html.  Solved.

  • Wireless connected but no Internet access

    I have a new (5 months) Acer Aspire 5732Z which works in Windows 7. Wireless connection shows that it is connected (full bars) but I have no internet access (there is a signal of yellow exclamation over bars error). I have another laptop running Windows XP which connects well to the same wireless router and wireless for Acer worked very well so far. I was on the phone with my ISP and they said, because it shows that the computer is connected to the wireless, they cannot help me. Anyone has any ideas that can help me?

    Thank you. I decided to call my Internet provider again and this rep was able to solve the problem without delay. From what I learned, if you get a representative who was not helpful, call again...

  • Ethernet or wireless is connected but no Internet access

    My laptop OS is Win 7 64 bit. My laptop able to connect to the internet, but it suddenly can't connect to the internet via the Ethernet or wireless. I tried to system restore and it worked fine, but after I stopped, the problem was took place again. I don't know if because of the McAfee antivirus or window updates because it has some errors (to McAfee) and Skype has been updated before I had this problem (no internet access).

    McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

    See the communication from this "criticism" - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  • loss of internet connection on windows 7 pro 64. Says connected but no internet access with yellow exclamation point! Help, please!

    I keep losing internet connection, I have windows 7 and every time I connect it to the wireless internet works for 5 minutes, then a little ytellow icon pop up and say its connected without internet access. Its happened to me before and recently started happening to my cpu. I did a FRESH install of windows to see if it can help, but it didn't. IM literally on the point of throwing my processor through the cause of wall, I can't find a solution to this anywhere. Whenever the yellow icon pops up that I have troubleshoot and it indicates the default gateway was unavailable and that fixed it, then I have internet again for about 2-5 minutes and it does the same thing. Ive never had this problem on my cpu and the network has not been changed or anything, so I don't know what that the * could cause this. I literally wiped everything on my cpu and then do a system image to restore too. Ive been messing around with the registry, deletion of things here and there missions that I read, but only thing that happens is losing internet alltogether and must restore from system image. I'm really running out of ideas. Help, please. I have an adapter netgear wn311b wireless pci-express with the latest drivers.

    to detect new updates for network based components on intel:

    http://www.Intel.com/p/en_US/support/detect/?IID=subhdr+dnlds_detect

    You will be asked to download and install active x components.

    After the installation of the small file, click on the "expand all" button

    You can choose to update your components wired network if necessary.

    then re-install your wireless network management software.

    assuming that your wireless network is intact (connected, permits), you can surf the net.

    If the problem persists, troubleshoot more away:

    When the computer is turned off, set again you netgear pci wireless adapter.

    set of antenna for optimal orientation.

    Check if your computer is authorized by your wireless router.

    check the signal strength of your wireless router and the wireless pci adapter.

  • Connected but no internet access? ... Help

    Hello

    If someone could help me that would be great!

    I rented a House and do not have access to the modem. I have a 2 year old HP laptop. When I connect to the internet it says connection to the internet and internet access. then, when I try to watch a video or anything of that kind, a yellow error sign appears in the signal at the bottom bar. It then says connected without internet access!

    Why is it that / is there a way to fix it? I need to start the work of the school and it does on every 10 minutes and I have to disconnect and reconnect!

    Can anyone help?

    Thanks in advance!

    Hi Helpthisgirl22,

    1. are you using a cable or a WiFi internet connection?
    2 have had any changes made to the computer before the question?
     
    See the methods mentioned below and check:
    Step 1:
    Why can't I connect to the Internet?
     
    Step 2:
    Windows wireless and wired network connection problems
     
    Hope this information helps.
  • Strong wireless connection but no internet access

    I am able to connect to the internet via a cable modem, but when I try to use my wireless router I don't get access to the internet none despite the excellent signal strength. My information on the two devices match. I can pick up other signals fine just not my router wireless.

    2010-06-17 13:51, primer McCapps wrote:
    > * I am able to connect to the internet via a cable modem, but when I
    > try using my wireless router, I get a no Internet despite
    > excellent signal strength. My information on the two devices match. I have
    > can be challenging other wireless signals very well just not my own router.*
    >
     
    What do you mean by "information"?
     
    What do you mean by "just not my router? Do you mean that you do not have
    see same SSID of your own router (network name) in the list of available
    wireless networks? If so, connect to your router with an Ethernet cable,
    Enter the router configuration utility and make sure that the SSID
    broadcast is set to 'enable '. If your router is already configured to
    broadcast its SSID, and you don't see it well be able to see the other
    near wireless networks, the portion of your router wireless is
    cut or broken.
     
    Generally, symptoms such as you describe are caused by a defect of
    to authenticate to the router, usually due to a mismatched
    password encryption.
     
     
     
    --
    LEM
     
  • WiFi connected but no Internet on El Capitan

    WiFi unit is airport Time Capsule. State of WiFi in the menu bar has 4 bars, as usual.

    However, mail and Safari are unable to access the internet.

    Airport on Mac Mini utility shows Internet with green pad. However, the Airport icon is greyed out.

    There are other Mac, iPad, and iPhone on Wifi network that access the internet very well. It's just the Mac Mini that cannot access the internet.

    I started in Mode safe. "When I try to load a web page in Safari, the message appears as".

    Can connect you to iTunes?

    Perhaps a proxy issue.

    Deselect if selected proxy.

    System Preferences > network > advanced > proxies tab

    Unlock the lock if you have to.

    Under 'Select the Protocol', uncheck if checked.

    Click 'OK' and then 'apply '.

    Best.

  • Satellite A110-195: WiFi connected but no Internet

    I have a Satellite A110-195.
    The RLR says its connected to our modem, but all we get is "cannot display the Web page.
    Can anyone help?

    Hello!

    Is there an internet connection the router/modem?

    What happens when you do a ping to a Web site? Do you have an answer?

    Try again with another browser. I use Firefox and I never had any problems with it.

    Good bye

  • HELP blackBerry Smartphones: 9320 - Wifi connected but no internet

    Could someone help me solve this problem? Thank you

    Hello

    When you say that your WiFi is connected, I assume you mean that the WiFi symbol is white, correct? If so, there are a number of things to try. First of all, I would like to start by rebooting your device. To do this, remove the battery for 15-30 seconds, reinsert and wait for the device to reboot.

    Once you have done this, if it still doesn't work, go to your options of WiFi and remove the connection from your phone. Reboot the phone by using a battery pull and then reconnect to the WiFi network. If it still does not respond, you may need to check your router settings to make sure that your router is to give access to your BlackBerry. If you need assistance with this, please post back with the brand and the model number of your router.

    I hope this info helps!

Maybe you are looking for

  • Satellite L300 - recovery program Webcam

    Running Windows 7 Home Premium 64 bit on my L300. Toshiba webcam program deleted it by mistake and now I need it back. Everybody there knows how to accomplish this magical Act because I have'nt a clue. ConcerningDenwilliam

  • Turn off or disable the voice and data roaming notification over Vibe X 2

    Hi all -what someone has any idea how to turn off the question when you make a call outside your network home, as different country... its boring as hell and can't find the function. Phone is VIBE X 2 4.4.2 Thank you

  • Try to run Family Tree Maker 2010.

    All I get is. [Family Tree Maker 2010 has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.] When Windows will inform me with a solution? This has

  • Routing VPN access list

    Hello I have a PIX 525 to my main site and a 1721 router at a remote location. I used the PDM and the SDM to configure site-to-site IPSec VPN connection. In my private network, I use 10.1.0.0/16 for the main site and 10.x.0.0/16 (where x = 2-47) to r

  • Adjust the Enkitec Navbar to be RTL

    Dear Experts,I hope to be able to adjust the CSS in the plugin Enkitec navigation bar to make RTLlike hereCan you help me with that?Thanks in advance for any help you provideConcerningMahmoud