WiFi connection disconnects with the error: 871122

Similar Questions

• WIFI connection lost with the Satellite A100-407

  Hello!
  I'm having a nightmare and would appreciate help!
  I have a laptop Toshiba Satellite A100-407, and I've been able to connect to internet via WIFI, however, in the last two weeks, he has ceased to operate.

  When I press Fn F8 it says my WIFI is off, but I don't know how this happened, nor I know how to reactivate it!

  To make matters worse my laptop is in German, and my grip on the German language is not that great at the moment, so if someone can help reactivate me my WLAN with indications of how do (IE. Go to the start bar, up 3, click on, cross 2 etc etc) I would be very grateful

  I'm sick of sitting on the ground to go online!

  Please check if the wireless network adapter is correctly enabled. Check first small WLAN switch if I remember well he must be placed on the right side of the laptop. When the WLAN led is activated, use the key combination FN + F8 to activate the WLAN option.

• Satellite L650 - WIFI connection disconnects when the AC adapter is removed

  Hello

  I bought Toshiba Satellite L650 in April 2011 in Canada.It works perfectly well in the Canada, but when I bring the laptop computer in Hong KONG to use, I have found the drops connection wireless lan or completely disconnected very often.

  However, my 3 other laptops in Hong Kong has this problem.

  I have
  -updated all the bio for window and software for the network adapter wireless;
  -deactivate the energy saving level
  -increase the TX power lever
  -the fact that said the following link

  http://support.Toshiba.ca/support/TechSupport/TSBs/viewtsb.asp?docid=TSB001593

  and still does not help.

  It's really frustrating to browse when internet is on and off.

  Could someone please help?
  Thanx
  T

  Hi mate

  I found a few solutions here on the forum and you have done great, but you forgot to update the WLan driver.

  So please update the WLan driver and disable the Wlan to economy settings too much energy.

  I think this should help you solve this problem!

  Good luck

• EZVPN connection fails with the error "Split tunnel higher than max attributes...."

  Hello

  We have ASA 5520 acting as the VPN server and the router Cisco 1941 as EZVPN client. These last days of customer is not able to establish the vpn connection. 1941 continuous router generates the below the log messages

  ---------------

  001569: Jul 22 ABC 12:19:05.883: CRYPTO-4-EZVPN_SA_LIMIT %: EZVPN (VPNGROUP) Split tunnel attributes (51) greater than max allowed split attributes (50)

  001574: Jul 22 ABC 12:19:07.835: % CRYPTO-6-EZVPN_CONNECTION_DOWN: user (customer) = vpn_user group = VPNGROUP Client_public_addr = Server_public_addr =

  004943: Jul 22 ABC 11:32:42.247: % IP_VFR-4-FRAG_TABLE_OVERFLOW: Dialer1: the table fragment has reached its maximum 16

  ---------------

  Future prospects for aid and the suggestion of experts

  Thank you

  Israr Ahmad

  Yes, your split tunnel access-list is too big, and he has reached the maximum number of lines.

  Try to reduce the number of ACL for your tunnel of split ACL maybe combining the subnets if possible.

• My attempt to connect to hotmail fails with the error message "this domain Services have been abandoned.

  Hello

  My attempt to connect to hotmail account fails with the error message "this domain Services have been abandoned. The problem persists in all web browsers. I'm unable to open a session (* address email is removed from the privacy *) which I've used for more than ten years, and I can't afford to lose. The problem started today and I don't know that I ever change any setting in my PC.

  Can someone help me with the first note.
  Thank you.
  Raj Kishore
  E-mail address is removed from the privacy *.
  E-mail address is removed from the privacy *.

  Hi Rajkis,

  When you use Windows Live Hotmail and the problem you posted is with Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Solution Center Hotmail Portal

  http://windowslivehelp.com/product.aspx?ProductID=1

  I hope this helps.

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Unable to connect to oracle DB using VBA and you are prompted with the error:-the client components and Oracle network have not been found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or installation of the

  Hello

  It would be helpful to me if someone can give me instructions on setting the version of driver or oracle client required to connect to the the Oracle DB using excel VBA

  My config: -.

  Windows - 8-64 bit

  Excel 2013-32 bit

  The components of the client / I should install, and how to solve the question below...

  I tried the VBA code... but you are prompted with the error message above

  Void Oracle()

  Con Dim As ADODB. Connection

  Dim rs As ADODB. Recordset

  Dim query As String

  The con value = New ADODB. Connection

  Set rs = New ADODB. Recordset

  strCon = "Driver = {Microsoft ODBC for Oracle}"; "." & _

  "CONNECTSTRING = (DESCRIPTION ="& _.

  "(ADDRESS =(PROTOCOL=TCP)"& _

  "(HOST = HostNumber)(PORT=PortNumber))" & _

  "(CONNECT_DATA = (SID = SIDNumber))); UID = username; pwd = password; »

  con. Open (strcon)

  If err. <>Number 0 then

  MsgBox ("Oracle error:" & vbCrLf & err.) Description)

  On the other

  MsgBox ("Oracle DB Connection successful.")

  End If

  End Sub

  I'll replace it with the values of host origin...

  Thanks for the suggestion you till u gave...

  complete solution is in the link below...

  https://itkbs.WordPress.com/2014/07/28/how-to-install-ODBC-driver-for-Oracle-in-Windows-7/

• migrate from Windows 10 failure error oxc ox400d 1900 failed in the second phase of startup with the error during operation of data on my windows desktop 7

  Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.

  Turn off the computer.

  Wait 10 minutes.

  Start the computer.

  The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.

  Launch the prompt with administrator privileges.

  Press the Windows key + X

  Click prompt (Admin)

  Type the following command:

  Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN

  Press enter on your keyboard

  Exit command prompt

  Restart

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Home Vista premium: KB978338 fails with the error code 80004005

  Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

  Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows.  The PC then realized... Updates not configured correctly - returning changes.

  Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

  Hi gbislay,

  I think that you are able to get on the desktop after changes have been restored.

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  The system update tool

   

  Step 3: Clean boot the computer

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

  You can see the steps outlined in the article below, which deals with a similar question

  Windows Update error 800f0826

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

   

  Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

  Thanks and greetings
  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not open the page to update windows with the error 80072efe

  Could not open the page to update windows with the error 80072efe

  0x80072EFE - ERROR_INTERNET_CONNECTION_ABORTED - the connection with the server has been terminated.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  TaurArian [MVP] 2005-2010 - Update Services

• Blue screen with the error "irql_not_less_or_equal"

  I have a problem I can not correct and hoped someone could help me fix.

  I got a blue screen while I was working on my laptop. I restarted windows and once connected, the office appeared and everything seemed ok, but before I could do anything that I got another blue screen with the error "irql_not_less_or_equal" So now, I have only access in safe mode.

  I tried to restore the system to a previous point, but the same error occurred during windows startup.

  Then I made a backup of my files and tried to use the disk to reboot, but again, I got a blue screen (I don't remember the excact error) after the first loading bar, so noting changed.

  Then I looked at the log files and found that, just before the first crash, an adobe update has been installed. I removed adobe list startup failed, completely remove the adobe doesn't either.

  Also, in safe mode I don't have an internet connection (without wire or cable). Blue screen errors is not always the same, esspesially codes "stop".

  My knowledge of windows is very bad, so I just tried things people recommended on internet. If someone could help me would be great. I deleted all my important files from my laptop so I don't mind lossing just as long as windows functiones correctly again.

  Thank you

  King

  Sorry, but there are way too many mistakes even describe.  You have about 5000 errors of Avast.  I would like to delete it

  

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• CONNECTION PROBLEMS WITH THE ROUTER (NETGEAR) - no problem with the provider of speed as it has been checked__

  • Programs you have problems with - very slow connection with all pages
  • Error messages - on the profile of my son is unable to connect at all with the error message
  • Recent changes made to your computer - windows 7 but added meeting the problem before this
  • What you have already tried the problem - claimant contacted no problem with their connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Reinstall the NIC drivers
  Reset the router and check.

• EIM Delete fails with the error SBL-EIM-00107: error ODBC 37000

  Hello

  When the execution of a removal of the EIM products, we encounter an error:

  Error: SBL-EIM-00107: error ODBC 37000: [Microsoft] [SQL Native Client] [SQL Server] DELETE failed because the following SET options have incorrect settings:
  «CONCAT_NULL_YIELDS_NULL, ANSI_WARNINGS» Verify that SET options are correct for use with indexed views or indexes on computed columns or the filtered index or query
  notifications or data XML type methods and/or spatial index operations.

  Can anyone help on this error?

  This work ran fine however on QA dev environment we receive this error.

  EIM table status "DELETED", but the current record not get deleted from the database.

  Hello

  Please check the display where we discovered this problem in a different context, the process of MRI

  MRI fails with the error "CREATE INDEX failed because the following SET options have incorrect settings: 'CONCAT_NULL_YIELDS_NULL, ANSI_WARNINGS'" (Doc ID 1619780.1)

  Please define

  the DB level settings. We do not know why SQL server is looking for these settings, maybe they are necessary from the point of view of SQL Server...

  CONCAT_NULL_YIELDS_NULL = WE

  ANSI_WARNINGS = WE

  They also changed the setting for the ODBC connection below

  Use ANSI null = values we

  fillings and warnings = WE

  Rerun EIM task after having defined meanings.

  Thank you

  Maddox.

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance