WiFi connection with only 11 Mbps

Similar Questions

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Internet connection with only a single cable to the ADSL PoRt ADSL in windows7

  Hi, sorry to ask this dumb questions

  It is possible to connect internet with only cable ADSL ISP in there.
  He got'in Port ADSL
  the operating system is windows7
  I already tried with checking the LAN settings in network and sharing Center
  but it does not solve my problem :(
  Please help me fast, the sooner the better :D

  Hello

  Thanks for posting your query in Microsoft Community and gives us the opportunity to help.

  Yes, you can connect to the internet using cable ADSL to ADSL Port in the Windows 7 operating system.

  See these articles for more information on the same:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

   

  Should which modem I use to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/which-modem-should-I-use-to-connect-to-the-Internet

  Hope this information helps. For any other related Windows help, do not hesitate to contact us and we will be happy to help you.

• 4500 envy: Envy 4500 not WiFi connection with numere end

  (Same problem with my other laptop running Windows 7)

  through Wifi or with a USB cable (drivers custom ' settle)

  Installed with disc or by download, same problem

  Can not install printer on laptop computers.  Get to the final stage, the last time I did all the things someone did on the same issue in type - uninstalled software, reset wifi on printer, router disconnected, boot etc... did not fix it.

  Error message: 0 x 00000643 by using the control panel, add the printer on Vista method

  Install the software,

  Ask me to add a new printer

  It found the printer on the network

  Network printer installation begins

  Error message - on two laptop computers, regardless of the method, never cross here

  -Unsuccessful network installation, this printer could not be installed on the network-

  Try searching for thing need that opens.  It does not solve it...

  Everyone?

  Hey @CandyCaneLane,

  Thanks for getting back to me on this subject.

  Because you get the message "the driver for WDF device Print is not installed" under the heading adding printer, it would seem that the packet driver HP full software functionality is not used, even if you have already attempted an install disk with the download. Can I please you follow the steps below.

  Please make sure that the USB cable is disconnected from your printer to your computer.

  Step 1: Remove the device:

  It is crucial for the repairs we have a clean slate to work with. So, I'm going you have to make sure every trace of your HP Envy have been removed from your computer, before installation. Perform the following steps on your computer Windows Vista and Windows 7.

  1. Click on the Start menu
  2. Select all programs
  3. Click the HP folder
  4. Select your HP Envy
  5. Select Uninstall
  6. Please follow the prompts on the screen to complete the uninstall
  7. Click on the Start menu
  8. Select the devices and printers
  9. If you see your HP Envy listed, please right click top and select "remove device' or 'Remove'.
  10. Once the device HP Officejet was deleted please click left once on any device used to indicate the heading Printers and fax machines . You just want to highlight the device
  11. Then click on the print server properties at the top
  12. Under the print server properties, click the drivers tab
  13. If you see your HP Envy pilot showing under the list please click on it. Then, click Remove. Click remove the pilot from the box pop up
  14. Click OK
  15. On the print server properties window, click apply and OK
  16. Close Devices and printers

  Step 2: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Install the device:

  1. Please click here to download the latest package Full Feature Software and Driver for your HP Envy
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Choose the installation by the network
  4. Once the installation is complete on your Vista and Windows 7 computers please test print and scan to confirm functionality

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• No wifi connection with Windows 8.1 on Lenovo Flex 2-14

  I have a new Lenovo Flex 2-14 with Windows 8.1 about this yesterday, but I can't connect to my wifi network. In the status bar, there are always Red Cross (not the yellow symbol) and no network is all.

  I read that many users know this, so I tried several drivers but none of them works. I have tried the one preinstalled on the D drive, the most recent on the Lenovo site and also some that I found via Google when I searched my wifi adapter (this is a Realtek RTL8723BE). But as I said, no driver does.

  Does anyone have an idea what I could do? This is a brand new laptop, so I didn't change any settings.

  Thank you!

  
  

• problems with WiFi connectivity with toshiba a500

  Problems with my wifi, toshiba satellite a500, any help would be greatly appreciated

  Hi Neil,

  Thanks for choosing Microsoft Community Forums.

  According to the description, it seems that you are having problems connecting to Wifi. I will certainly help you fix this problem.

  (1) what exactly happens when you try to connect to Wifi?

  (2) you receive an error message?

  (3) have you made changes on the computer before this problem?

  Method 1: I suggest you to follow the steps from the link and check if the problem persists.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-za/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2: If the problem persists, I recommend the steps and check if that helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-za/Windows7/fix-network-adapter-problems

  For reference:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-za/Windows7/wireless-networking-frequently-asked-questions

  I hope this helps. Try the above steps and get back to us for further assistance if you have questions about the Windows operating system. We will be happy to help you.

• A720 Wifi connection

  Hello

  How do I activate the A720 Lenovo WiFi connection with 5 GHz.?

  Kind regards

  Hi yousef_z,

  What wireless card you have in your system?

  Is that what this Broadcom BCM4313:

  https://www.Broadcom.com/products/wireless-connectivity/wireless-LAN/BCM4313

  Or the Realtek RTL8188CUS:

  http://www.Realtek.com/products/productsView.aspx?langid=1&PFID=48&level=5&Conn=4&ProdID=274

  Both of these cards are 802.11b/g/n, which means that they only operate in the 2.4 GHz band.

  If you want or need to use the 5 GHz band, you can buy a USB wireless adapter for it. They do not cost much more. Just search for "usb 5 ghz wireless adapter" on your favorite computer store, and you'll see there are a lot of options.

  See you soon

  DragonRider

• WIFI connection blocked by the administrator (unexiosting)

  When I try to connect to a WiFi spot system blocked any WiFi connection with the following message. "Your network administrator has blocked you connect to this network '.
  But it's a PC that is private, with any network administrator.
  How can I turn off this blocking option.

  nfr2410, it's possible, especially if you have set up your computer to be part of a domain, when you did.
  To check if you are on a domain: click Start -> click right computer -> select Properties. In the System window, list information under the parameters name, domain and workgroup of the computer. Here you will see a side area if you are currently set up for one.
  
  Another thing to try is removing filters authorization via the command prompt, here are the steps:

  1. click on Start -> all programs-> Accessories.

  2 right click on invite and then click run as administrator . If you are prompted for an administrator password or a confirmation, type your password or click continue

  3. at the command prompt, type the following command and press ENTER:

  netsh wlan delete filter permission = denyall networktype = infrastructure
  netsh wlan delete filter permission = denyall networktype = adhoc
  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Wi - Fi connected with limited access

  I can't connect to the internet.  My shows of WiFi - connected with limited access.  When I view the status of wireless network connection - it shows IPv4 and Ipv6 not connected.

  This suggests even more than the fastest and the best option you have is to contact the ISP and have them help you with the installation and check all devices (including their and their connection to your location).  You can fight with various alternatives that may or may not work because we are not sufficiently familiar with your Installer, equipment or requirement of ISP, or you can go directly to them and I'm reasonably sure they'll have you facing up and running without delay (assuming that it is not a hardware problem or something at their end).

  The decision is yours.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Portege Z30-a-1E1 - WIFI connection only 150Mbps

  Hello

  Today, I received my Toshiba Portege z30-a-1e1 running Win7. I've updated all the drivers, firmware and of course Windows itself. Unfortunately the WiFi only connects up to 150 Mbps (router configured to 5 GHz only, 40 MHz wide only, only N and auto channel selection, WPA2 Personal). Other laptops at home are connecting with up to 260Mbps (even 7 Asus F8v). Portrege shows that it is connected with the 802.11n standard.

  Any suggestion that I can do to activate the higher speed connectivity.

  Kind regards
  Blazej

  Hello

  150 megabits per second transfer is not a bad value for 802.11 WLan N standard.
  WLan highest transfer rate depends strongly on factors such antenna Wlan, WLan miniPCI and environment module.

  Wikipedia gives this info on the standard 802.11 N standard:
  … Assuming that the operating parameters equal to an 802.11 network g reach 54 megabits per second (on a single channel of 20 MHz with a single antenna), an 802.11n network can reach 72 megabits per second (on a single 20 MHz with a single channel antenna and ns 400 guard interval); of 802.11n speed can go up to 150 megabits per second, if there are no other shows Bluetooth, oven microwave or WiFi in the area using two channels of 20 MHz 40 MHz mode. If several antennas are used, then 802.11n can go up to 288 megabits per second mode of 20 MHz with four antennas, or 600 megabits per second in mode to 40 MHz with four antennas and 400 ns guard interval...

  http://en.Wikipedia.org/wiki/IEEE_802.11n-2009

  By the way: you can check additional WLan module settings in Device Manager-> properties-> Advanced tab

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• WiFi M70 satellite connection with WEP or WPA

  Hello
  I have the Satellite M70-164 with an Intel PRO 2200BG wifi adapter with the latest driver for the value.

  My problem is that I can connect only to networks with security (with WEP or WPA), when I try to connect to "open" wifi computer networks never establishes the conection, he said "waits for the network.

  Any help will be appreciated.
  Pedro

  Hello

  Have you checked if this problem occurs with the 2200 BG WLan driver on the site of Intel?
  Please check for this possibility.
  Please follow this link:
  http://downloadfinder.Intel.com/scripts-DF-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good bye

• How do I stop sharing incoming/calls recent calls on my OWN multi iOS devices (iPhone 4 6) connected to WiFi even with same OWN Apple ID

  I have iPhone 4 devices 6 sim cards from different countries and of course with my own unique Apple ID and while that for WiFi connections even all devices begins reception even incoming call and ringing all at the same time! In addition the recent calls log will be showing that the calls or calls missed on all devices! … I changed hands and face time and sharing on all devices... but still the same problem any feature that really boring case and mix up my call logs.

  Who told you that it is a feature... OK... I respect your reply and my answer to you that I have the right not to have this great feature on my own multi devices which of course, I use only my same apply id on each of them and I'll connect them all to the same WiFi. then please underestimated that a function can be turned off or the user-controlled means it is not a feature and its name called (BUG)

  I wish I can hear other users with iOS multi devices if they are in need like me do not have any sharing between their devices with their own single apple ID mainly iPhone devices in WiFi even or even not even WiFi... with respect now, it's a problem for a few months and still not resolved and people continue to fight on this issue.

  Thank you

  Osama

  Osama.Hamaydeh wrote:

  Who told you that it is a feature... OK... I respect your reply and my answer to you that I have the right not to have this great feature on my own multi devices which of course, I use only my same apply id on each of them and I'll connect them all to the same WiFi. then please underestimated that a function can be turned off or the user-controlled means it is not a feature and its name called (BUG)

  If you share an Apple ID, call logs will be shared. Some people have reported success to stop this behavior by turning to iCloud by car. If you need this feature, you're stuck with the sharing of call logs, until Apple decides to change the way the phone works. Just because you don't like not the feature does not mean that it is a bug. It simply means that this is a feature that you don't like.

  Submit your Apple here:

  http://www.Apple.com/feedback

• Slow connection with the built in WiFi card

  I have a connection wanadoo adsl internet 20 Mbit family with a direct box. The box is also a wireless router.
  When I connect to the livebox with my toshiba mx40-231, the connection is very slow. The connection is constantly switch between 1 Mbps and 54 Mbps and speeds range between. It is also the problem. One moment an internet page is send in 1/10 of a second and 1 minute later a page to load in 20 secconds! the strang thing is that the intensity of the signal is constant high!

  With the direct box, I also had a wireless USB key. When I use this stick I get a connection very quickly 54 Mbps constant.

  It seems to me that the construction of the wireless card is the problem. I already have the latest wireless driver and tried a few channels on the router.

  Someone at - it an idea to solve this problem so I can throw this wireless stick :-) Thing very clumpsy this stich on such a portable wireless of beautifull!

  Hello

  If you check the wireless card, you will find many topics on this subject. We know that Intel 2200 B/G card wireless make disorders and connection is not constant. We can only speculate why this happens, but the fact is that this card has problems with different routers.

  For example: Satellite M40 has the same card and the fantastic work with Netgear router. Even with Belkin, it works well in full speed.

  I recommend you to install the latest version of the driver Intel

  Good luck

• Problem with WNDR4500v3: Intermittent WiFi connection

  Switching internet providers twice (last return to the original supplier), my wifi connection for intermittent at least 3 to 5 times a day, if not more. I went through my ISP which has bypassed the router and it is not on their end. I had no such problem with the previous provider, or until I went back. I have reset the router and still the same issue. I've only had it since November/December last year, is out of warranty tech support. I don't know what else is wrong. I hope someone can help me! I am tech savvy except when it comes to troubleshooting.

  You can follow the procedure here.