WIFI connection works do not after Windows Update installation

Original title: update windows

My daughter who has just an update running on Windows 8. He wrecked his WiFi connection/settings. His internet now works on the wired only. Is it safe run a system restore?

Paul,

Tip: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or updated IE & restart.  If that does not resolve the problem, then try System Restore.

Restore to before the update was installed check Windows updates and hide the update so it would not automatically reinstall and the program works.

The time and date of this moment in Washington, United States of America is 16:14

Tuesday, October 29, 2013
The time Pacific daylight time (PDT)-0700 UTC

UTC/GMT is 23:14 Tuesday, October 29, 2013

Current weather conditions in Seattle

Just55 ° F / 13 ° C

Tags: Windows

Similar Questions

  • Function keys not working do not after Windows 7 installation

    Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you

    What can I do with this? I want to re install windows. ?

    Hello

    This thread offers you everything you need to install the right keyboard control drivers and utilities for your function keys working again:

    http://www.geek.com/forums/topic/Sony-VAIO-fn-keys-no-longer-work

    Don't forget to keep your model number of the laptop at hand for the page of the driver from the Sony site.

  • Internet and the printer works do not after windows update

    Windows xp, mcafee internet security

    Recently, I ran a windows update and leave my computer turned off.  When you turn it on, the were (are) of the internet and the printer does not.  I went into Device Manager via Control Panel to see if I could turn them on and there is nothing pulling up in the Device Manager.  All documents and are accessible, but I can't even start a new internet connection and cannot print.   I am currently using another computer (more modern) in another room.  I even tried the SafeMode (f8 in the middle) from the model and go to Device Manager and nothing was there.  I just tried to go through the f8 option and beginning to a previous state that worked and I have the same result...  Everything is saved on that on a 350g portable hard drive.  It would just be easier to wipe the hard drive and start over? If so how would I do this reformatting?  Thanks for any advice.

    Michael

    Hello MikeKloss,

    Before you destroy by formatting the hard drive on your computer, I suggest that you do a restore of the system on the computer by choosing a restore point when it was working fine. You can check the link that will give you information about how to restore the system on the computer below:

    http://support.Microsoft.com/kb/306084

  • Skype works do not after Windows update Setup

    Original title: you broke all my messengers with DEP.

    That's why I never install updates - I'm tired of every time I do it, something in your update with my computer breaks. :/
    I thought about this once, of course, I'll do the update and now my Skype will not work.
    I entered in the system settings and click allow Skype.exe DEP but it always closes the program. Yes, I restarted too.
    How to operate? It is extremely important that I make it work again soon.

    -Edit-
    I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
    But I got "access denied."

    Original title: you broke all my messengers with DEP.

    That's why I never install updates - I'm tired of every time I do it, something in your update with my computer breaks. :/
    I thought about this once, of course, I'll do the update and now my Skype will not work.
    I entered in the system settings and click allow Skype.exe DEP but it always closes the program. Yes, I restarted too.
    How to operate? It is extremely important that I make it work again soon.

    -Edit-
    I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
    But I got "access denied."

    Don't blame Windows updates.
    For all the world claiming fault from Windows updates, there are at least 2 who have had no problems with it.

    It's your computer. Somewhere, the parameters are wrong.

    As to...
    I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
    But I got "access denied."

    When you run the cmd, command prompt, you're supposed to do right click on cmd > click on Run As Administrator > then enter the command in cmd.
    They call this elevated command prompt.

    Did you do that?

  • Windows upgrade works do not after Windows 7 installation.

    Upgrade to Windows 7.

    I've updated my gateway GT5404 Vista machine to Windows 7. Everything went well, but however I can't get updates to install via windows update. Right now it is showing 21 important updates, but all fail repeatedly. I get the error message 80070539. I have reinstalled (via the upgrade option), checked for malware and nothing software solves the problem. I'd appreciate any help.

    Withdrawal of Google worked thanks!

  • Atheros AR5007EG Wireless network adapter not working do not after Windows 7 installation

    After a clean install of windows 7, Driver atheros wireless AR5007EG network card button no longer works. As a result not able to connect wirelessly. I first upgraded to vista, but did not uninstall norman antivirus, which gave me a few problems. Impossible to uninstall or update any longer, so I decided to install win from scratch. Anyone know how to get my wireless to work. PC is Fujitsu Siemens, about 2 years.

    The driver has been updated and status is installed, the problem might be that the wireless button no longer works, so I'm not able to turn it on. Is there a separate driver / settings to do this, or is it included in the wireless driver.

    You can find a better driver for your Atheros AR5007 at http://www.station-drivers.com/page/atheros.htm

  • HP - Beats special edition Mo: key USB not working do not after Windows 7 installation. Please help.

    HP - Beats special edition
    Model: 15-p030nr REF: 7018105

    Problem: 3 USB ports do not work. Does not recognize devices plugged into one of the PORTS.

    I installed Windows 7. I have install all drivers listed on http://support.hp.com/us-en/product/HP-Beats-Special-Edition-15-p000-Notebook-PC/6936229/model/71742...

    I noticed that there are not any folder driver CHIPSET.

    Already tried CHOKE START/MANAGER/upgrade to driver UPDATES. None could be found.

    Please notify.

    Hello:

    See if downloading it and installing the drivers from the chipset amd works for you.  Restart after the installation.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  • Keyboard and mouse not working do not after Windows 7 installation

    Windows 7 has recently been installed on my Dell computer and now won't work neither the keyboard nor the mouse. I tried all the USB ports available without result. I have an old MacBook and the mouse works on that so I know that's not the mouse. I can't begin to solve the problem if I can't use the computer. I read the instructions on how to use a computer without a keyboard or mouse but they all say "Click on Start" How can I click if I have no keyboard or mouse? Help, please. I need my computer to the wrong House and right now it is totally useless.

    Hello Suzanne,.

    I would like to know some information about the problem so that we can help you better.

    1. have you tried to use another keyboard with Windows?
    2. What is the model number of your Dell computer?

    Thank you for details on the issue.

    I also realize the inconvenience that you are experiencing the problem of keyboard and mouse. I will definitely help you.

    Problems of mouse and keyboard can occur for the following reasons:

    -Cables are not connected properly.
    -Incorrect device settings.
    -Missing updates.
    -Corrupt or incompatible drivers.

    I suggest you use the steps in this article and check if it helps.
    Reference:
    Mouse, touchpad and keyboard with Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • T43 Touch Pad not working do not after Windows 7 installation.

    The touchpad on my T43 does not work with Windows 7. I tried several drivers without success; any suggestions?

    Have you tried to install the update of system 4.0 to get all the correct drivers?

    You can also toggle the touchpad in BIOS in order to doublecheck that it is actually activated. You can also toggle touchpad by going to control panel, mouse and the Ultranav tab, if you have the correct driver installed. Another option is to press Fn + F8 to toggle the touchpad, but it also requires some drivers and software from Lenovo for work.

    -gan

  • Satellite A350 - FN keys not working do not after Windows 7 installation

    Sorry for my bad English, I'm Portugal forum and I did not have very good English.

    1 I have installed Windows 7 on my pc, installed the 7 drivers and FN had to give. However, I had another problem and had to format the pc again, now just reinstall and feature not the FN.

    2 without the drive feature which is FN + F6/F7 brightness works. But with the player not install anything. It seems that they are in conflict.

    3 the bar at the top of the screen that seemed more is displayed. But if I'm at the start-> all programs-> TOSHIBA-> Utilities-> settings for TOSHIBA E-cards. With it's open, press 'Allow the mouse to show the cards' at the top, they appear as hidden. But just gives me not at all, I want to give to the FN.

    Anyone know how this is resolved? He gave me a huge way and even tried everything, everything has been installed, there is nothing to block the FN key? A feature that blocks this key? Please help me.

    My PC as it says in the title is Toshiba Satellite A350D PSALME 10Y...

    Hello

    You must install VAP (value added package) and Flash memory card Support utility.
    Since these two tools are not related to a specific model laptop, try the tools available for Satellite L500 series.
    I tried and it worked!

  • Aspire V 17 Nitro - function keys not working do not after Windows 7 installation

    I just recently picked up an Aspire V 17 Nitro and immediately installed Windows 7 above. Everything works great so far but I noticed that the function keys do not work. Those where you hold down the "Fn" key and then do things like adjust volume.

    Someone knows how to fix this?

    Thank you.

    I thought about it.

    I had to install the program "Launch Manager" from Acer.

    And I had to go back a few versions to find one that worked with Windows 7.

  • Output HDMI not working do not after Windows 8.1 update

    I use an envy TouchSmart 15 and I just launched an update of Windows based on the automatic system update 8.1 (he ran 5 updates).

    Before the update, I've used a 27 "monitor in the main screen, and it was connected via the HDMI port.  Just after the update, the system does not recognize the HDMI port and more and this goes back to the use of the screen of the cell phone Envy as the main screen.  I changed the HDMI cable but it made no difference.  I am connected subsequently another laptop to the monitor 27 "via HDMI and it worked fine.  So it appears the monitor and the HDMI cable are fine.

    Please can you help me?

    Hey yawbus,

    I would firstly you welcome on the HP Forums!

    Thanks for sharing the troubleshooting steps that you already have, and I say you are right that the issue is not with the HDMI cable or the 27 "monitor. From what you described in your post, it sounds as if he is with the drivers, maybe a conflict.

    I would like to begin with the installation of the original video drivers supplied with your laptop. I've included the document "using Recovery Manager to restore the software and drivers (Windows 8)". Please follow the steps to reinstall everything video original drivers. After you have installed the original drivers, restart your computer.

    Now, once the computer is restarted, you will need to install the updates that are available for HP and Windows. You can install both of them through the HP Support Assistant. I've included the document 'using HP Support Assistant (Windows 8)'. Scroll to the bottom of the page on to Midway, and you should see an option for the updates and the updates. Please follow the options for HP and Windows updates.

    If you are still having the same problem after the above troubleshooting steps, please let me know the model number full of your envy TouchSmart 15. I've included the document 'Guide to finding your product number'. So, please confirm the current version of Windows that you are running. If you need help to find the version, I've included the document 'operating system Windows that I am running?'.

    Looking forward to your reply!

  • The mouse and the keyboard doesn't work do not after Windows 7 update

    I have Windows 7 Home Edition.  My CPU is the last Windows Update during the night, now the keyboard and the mouse do not work.  I rebooted and unplugged both several times.  I go back to my login screen, but I can't do anything from there.

    I prsume your keyboard is USB?  If you can find a friend who has an older keyboard with a PS/2 connector, you can try this, F8 again and select last last known good configuration.

    There is no updates yesterday in itself, because I have them on my PC (I hate the 2nd Tuesday of the month because I run around the House like a crazy woman by ensuring that 1 Vista 64-bit, 2 Server 2008 R2 64-bit, 2 Windows 7 32 bit and Windows 7 64 bit 4 are all downloading correctly and restart if necessary.) All keyboards and mice are works well here.

  • Windows 2008 R2 Services starts do not after windows update

    I have a created .net service (which is independent) that is configured to start automatically, this service does not start automatically after a reboot after connecting to the server of the service taking a (windows update required restart) but once I start. Can someone tell me why this happens?

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Windows log answers do not after windows update-7-9-14

    Journal Windows does not respond after a window updated July 9. has anyone else had the problem.

    I think it is the update because I restored the computer before this date and it works fine but again hit update and it still does not work

    I found that uninstalling KB2971850 solves the problem.

    Good luck.

    John

Maybe you are looking for