WiFi disabled by lan/wan switching. HP 8470p. How can I solve this problem and turn on WIFI?

Similar Questions

• Hi why my iphone wifi turn off automatically when I lock my device? And how can I solve this problem

  Hello

  Why my wifi from the iphone 6 turn off automatically when I lock my device? And how can I solve this problem?

  Yes, it's designed for it. If, however, you plug, WiFi will not drop when the screen is locked.

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• my wifi guard stop and say limited access, how can I solve this problem?

  tab connection WiFi on my menu bar appears with a yellow top triangle and when I click it says my connection has limited access, I click with the right button on my connection and tap status, then diagnose that the problem and fix it, but it fixed it for an hour or so that it reappears and stop my internet connection. At the time of diagnosis, he said the problem was with the network gateway and that it is now fixed, but the same problem happens again in an hour or two. Someone know how I can get the fixed peramently?

  Thank you

  Hello

  
  Method 1:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  
  Method 2: Uninstall and reinstall the network adapter drivers. Follow the steps mentioned.
   
  (a) click Start, right click on the computer.
  (b), click Properties, click Device Manager
  (c) Expand network adapter, right click the Wireless option adapter, click Properties, click the driver tab, click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.
   
  See the link below:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  For more information, see the article mentioned below:
  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• How can I solve this problem of 'Two versions of Adobe', then only the most recent version remains activated, the old version remains DISABLED, and/or uninstall the old version?

  I went to my addons tab, and I have, in fact, have two versions of shockwave flash, a 11.9... version and a 13.9, which, if I'm not wrong, is the latest version. There is a 'request to activate, activate always, never activate' button for EACH module. I clicked on never turn on the old version and the closed tab. I then tried to play a video on the Web. He would not play, I tried another site with the same result, so I went back to my tab add-on, and the button for the old version had changed again to "always enable" in itself. He continues to repeat this, and WILL NOT stay on "never activate. Whenever I return to the page complementary modules, THE NEW VERSION IS DISABLED, SO THAT THE OLD ONE. I tried to uninstall the old version, but when I go into Control Panel and make the contents of the file, the old version is not yet there. I did start, search and typed in "Adobe", and the old version is NOT FOUND! The two versions to change back the turn on button and they both will disable themselves, no matter how many times I fix it! SMH!

  No worries, I was just starting.

  The Flash plugin is stored in this folder:

  C:\Windows\SysWOW64\Macromed\Flash
  

  The filenames for the plugin in Firefox have this model:

  NPSWF32_13_0_0_206.dll
  

  where the middle part (not in bold) is the version number of the plugin.

  Update from Adobe should normally remove older versions, but if they are actively used, it is possible that the update is not able to remove them.

  If you find the file, try to delete or move the temporary office.

  Firefox may not immediately realize that the file has disappeared, but hopefully that will detect only after the next time you're out and start it back up when it updates its scan plugins.

  A little luck?

• When I use ctrl-alt-del to do to the Task Manager I get a message that says that my access in the task manager has been disabled by the administrator - but I AM the administrator - how can I solve this problem

  This does not occur in a given program, but at all times

  First take the precaution to ensure that your computer is free from virus/malware because it is a symptom of infection.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the machine is clean, then:

  Activate the task (line 51) Manager - http://www.kellys-korner-xp.com/xp_tweaks.htm
  Lift the Restrictions - Task Manager, Regedit and CMD (line 275) - http://www.kellys-korner-xp.com/xp_tweaks.htm
  Troubleshooting of the Task Manager - http://www.kellys-korner-xp.com/xp_t.htm#tm
  http://windowsxp.mvps.org/Taskmanager_error.htm - Task Manager has been disabled by your fix administrator MS - MVP - Elephant Boy computers - don't panic!

• My MicrosoftSecurity Essentials has been disabled by a virus. I removed mse, reinstalled, but it does not analyze or I can open it. How can I solve this problem?

  I downloaded the Windows security analysis. He says I have 4 infected files... not sure which. I reinstalled Microsoft Security Essentials, but it does not parse when you have completed the installation, nor can I open or scan with it.  How can I fix?

  Mr Bould.

  Thanks for the answer to my problem. I tried your suggestions, but the particular Trojan horses and Virus FraudTool.Win32.Fake (A Rogue Security hoax) had smeared my registry entries to not allow downloads.

  However, when I downloaded and followed the instructions with VIPRE rescue, he was able to clean and eliminate all problems. Now I feel safe at last.

  Gilbert gray

  Harrisonburg is GOING

• connection statistics is unknown, the service to detect this State is disabled. How can I solve this problem?

  network connection status unkwown

  Check if the following services (responsible for the internet connection) are the value automatic and started.

  ·         DNS client

  ·         DHCP client

  To do this:

  1. click on start

  2. type services.msc in the search bar

  3. open services.msc

  4. search for the above mentioned services and start the services if they are arrested.

  You can also run the tool the Network Diagnostics by right-clicking the network icon in the notification area, then click on diagnose and repair. More information in the link: http://windows.microsoft.com/en-US/windows-vista/The-doctor-is-in-Using-Network-Diagnostics-in-Windows-Vista

• in wiraless I can access the internet... but in lan, I can not... It is showing there is no default gateway... How can I solve this?

  I can access wireless internet... but in lan, I can not... It is showing there is no default gateway... How can I solve this?

  Hello

  1. you have from any other computer connected to the same network? If logged in, you are able to access the Internet on the other computer?

  2 have you made any changes to the computer before the show?

  3. What is the brand and model of the router?

  In the meantime, follow these steps and check.

  Method 1:

  First, you try to run the troubleshooter from network built into windows 7 and check if it can help solve you the problem of connection to the Internet.

  Access the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  If the problem persists, you can manually assign the IP address and the default gateway and check if it works very well. Before assigning the IP address and the default gateway manually, make a note of the IP address on the computer. To do this open command prompt, type ipconfig and press to enter. This displays the IP address, make a note of it.

  To manually assign the IP address and default gateway, follow these steps:

  a. in the system, right click on network icon tray. Choose the open network and sharing.

  b. right-click on the connection to the Local network and click Properties. c. double-click Protocol Internet Version 4 (TCP/IPv4) and assign the IP address manually.

  Example: Old IP address is 192.168.0.1

  Replace the IP 192.168.0.50

  d. let the subnet mask and default gateway are the same.

  Subnet mask = 255.255.255.0

  Gateway by default, would usually 192.168.0.1 or 192.168.1.1

  e. click apply then click Ok and restart the computer and check if it helps to solve the problem.

  Method 3:

  You can also try to contact the manufacturer of the router and try to reset the settings of the router and check if that helps you solve the problem.

  Method 4:

  Also try to uninstall the network card in Device Manager, then restart the computer. Later allow Windows to install generic drivers and check if it works very well.

  Before you uninstall the network card, I you suggests to create a System Restore Point manually, so that in this case, a problem occurs when performing these steps, you can always perform a system restore.

  Follow the steps below to uninstall and reinstall the network card.

  a. click on start

  b. the start search box, type "devmgmt.msc" and press on enter

  (c) in Device Manager, expand network adapters

  d. right-click on the network adapter and uninstall.

  e. restart the computer, and then reinstall the network card.

  When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.

  You can also consult the following link:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps!

• An internal system component has disabled the hibernation. How can I solve this? __

  > I went through all the steps and not the powercfg h on and it says this:
  > hibernation failed with the following error: the request is not supported.
  >
  > The following preventing hibernation on this system.
  > one or more older drivers are installed:
  > VgaSave
  > An internal system component has disabled hibernation.

  I was told of pilots video what is the problem of the VGASave but I have the latest drivers.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  A Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The volume control of my PC is disable and I can not solve this problem, also when I play music is not coming from my speakers. I get this message of code Codec

  Hi my PC had a sound problem when I try to play music, he invites a message that says code codec is necessary, and another thing is that my volume settings are disable that I can't put my volume of how it should be, because it says it is set wrongly with dubbing high setttings for volume to be properly defined.

  Hi Marc Bopape,.

  1. what operating system is installed on the computer?
  2. What is the accurate and complete error message you get?
  3. don't you make changes to the computer before the show?
  4. What is the format of the file you are trying to play?
  5. what application you use to play the song?
  6. What is the brand and model of the computer?

  I suggest you try the steps from the following link:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Additional information:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

• I used to have tabs for each email address, now I have one and duty switch between them, how can I fix this?

  Each of my email accounts was on a separate tab, so I could look at them all together, I managed to change the layout so that now I have to use 'Go', 'file' etc. I would like the old traced back but cannot find a way to change the menu.

  I don't know about the separate tabs. Maybe you're talking about the pane of folders down the left margin of the main window.

  In the menu bar select view-presentation-folder pane

• Some applications (Soundcloud, YouTube, Tumblr and Instagram) are not to say that I have a wifi connection when I clearly one. Why is this and how do I solve this problem?

  As I said, some applications are not I have an Internet connection when I do really. YouTube and Instagram both of my loading workflow error messages, Tumblr went to appear in messages on my dashboard at least a week to not show anything on my dashboard and Soundcloud would not load completely. I tried to reset all my default network connections and had to redownload all apps - but who does more, and now I'm stuck being connected on all of them (with the exception of YouTube, which is back to square one (I think)). We are dealing with issues with low storage because of the cloud is all messed up, so maybe she's the one, but I'm not sure. Anyone could try to guide me through fixing this? Thank you

  Hey there dubstepspacecatjr,

  Welcome to the communities of Apple Support! From the sound of things, you experience problems connecting to the internet in specific applications on your iPod touch, such as YouTube and Instagram. You also tried to reset the network settings and reinstall applications, which are key steps in troubleshooting. I can certainly understand the importance of being able to access the internet in order to get most of these applications. I'll be happy to take a look at it with you.

  The first place wherever I would like to first of all is the use of this article:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  https://support.Apple.com/en-us/HT204051

  If you haven't already done so, good insulation should see if this connection within these apps problem persists when you use cellular data. In addition, check that you are able to browse and connect to Safari on your iPod.

  In addition, you do not want to look at the backup and restore of your iPod as a new device. From there, you can reinstall the applications and see if the same thing happens. This will help to rule out existing issues/corruption of software.

  The following items have the steps on how to create a backup in progress, but also to restore your device to factory settings:

  How to back up your device using iCloud or iTunes

  https://support.Apple.com/en-us/HT203977

  How to clear your iOS device and then set up as a new device or restore from backups

  https://support.Apple.com/en-us/HT204686

  Have a great rest of your day!

• my user account has switched to the owner, at the present time, there is no administrator, and I can't remove programs or change anything, how can I solve this?

  Help

  I'm still not sure what you mean by that. Please specify after reading these links to see what is needed in your next post.

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  If you cannot find a way to explain what happened, take the computer to a competent local technology do not use a type BigComputerStore/GeekSquad of the place. I do not mean to hurt your feelings somehow; just to be practical. MS - MVP - Elephant Boy computers - don't panic!

• When I type on a path type is all capital letters even when traffic is disabled, how can I solve this?

  I work on a personal logo and wanted the guy to follow on the path of a circle. When I type in any character that's all uppercase... Ive checked my character signs and chose the small caps but it always results in all types of plugs. Does anyone know how can I fix?

  N of Tara

  In the character Panel menu > character reset

  or

  Pref. reset may be the best option then.

  Windows: CTRL-SHIFT-ALT immediately after you double-click the PS icon.

  Macintosh - CMD-SHIFT-OPTION immediately after you double-click the PS icon.