WiFi disconnects internet access 10 to 15 seconds after the connection.

Similar Questions

• stop work after 30 seconds after the connection of 32-bit applications

  I have a problem that some of my 32-bit applications (vlc.exe, sapphireeffectbuilder.exe... etc) fail to start if I try after 30 seconds after the connection to windows. I managed to identify only a couple of processes that stop after 30 seconds of recording. These are:

  SearchProtocolHost.exe
  SearchFilterHost.exe
  IAStorIconLaunch.exe

  I'have tried to re-indexing and reinstall the intel RST service but no luck so far.

  I can see the vlc.exe in the system tray, but nothing of lance. Help, please. Thank you

  Hello

  Please contact Microsoft Community. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem might have occurred because of these reasons:

  1 conflict between third-party applications.

  2 corrupt system files.

  3 virus.

  Try the steps listed here:

  Method 1:
  I suggest to start the computer using safe mode and check if the problem persists or not. If the issue happen not in Mode without failure, you can set up your computer in a clean boot and check if it helps.

  Step 1:
  Start the computer in Mode safe. At the start of the computer Mode safe with the minimum set of drivers and files.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:
  If the issue happen not in Mode safe, we will set up your computer in a clean boot state and check if it helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you to virus scanner to make sure that the computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  (1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Method 3:
  If the problem persists, I would say allowing you to run the auditor of file system (CFS) analyze and check if it helps.

  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• ESXi/ESX host disconnects vcenter Server 60 seconds after the connection

  Hello guys,.

  I recently made some changes to my VMware Lab.

  I'm under vCenter 5.1 with several hosts of ESXi 5.1.  My vCenter ran on one server ESXi 5.1 until I recently migrated there in a window of Windows 8 running VMware Workstation 9.   The vCenter is running normally and I am able to add hosts in stock, but they disconnect after approximately 60 to 90 seconds.  I believe that this issue is that the heart beats that are sent by the host do not reach the vCenter (port 902), I think that it is similar to the issue discussed in the following KB:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1029919

  Here are my questions:

  1. the article describes download wireshark and run scripts.  Is there an easier away from do?  I'm literally just checking this single port of the ESXi host, there is no equivalent for telnet from an ESXi host?

  2 VMware Workstation 9 block ports or run its own firewall any?  Since this vCenter worked perfectly when running on the host ESXi 5.1 we know this isn't a firewall on the virtual computer problem, I have also checked the Windows 8 machine running VMware workstation and have verified that the windows firewall is disabled.  Windows firewall is not the issue. 

  Thank you

  Duncan.

  Just a quick question. A fact change of IP address of the server vCenter with migration of VMware Workstation? Maybe http://kb.vmware.com/kb/1008030 is related to the question!

  André

• In order to become a distributor of volume Adobe Reader, (my computers have no internet access), I need to fill out the Distribution of Volume License Agreement, but will not accept an answer I gave to the question: "Please indicate the product or service

  In order to become a distributor of volume Adobe Reader, (my computers have no internet access), I need to fill out the Distribution of Volume License Agreement, but will not accept an answer I gave to the question: "Please indicate the product or service name and description.

  This form must be completed and submitted online. Also the browser Javascript must be activated.

  https://distribute.Adobe.com/mmForm/index.cfm?name=distribution_form&PV=RDR

• Mail crashes 2 seconds after the beginning

  Mail crashes 2 seconds after the beginning

  -Mac Book Pro retina

  -Captain El OS - X, last updated 7 June

  -Apple Mail, Update June 7

  The problem cannot be resolved. Restart of OX - X does not help.

  Try this:

  Exit the Mail.

  In the Finder, select go, then navigate to the folder. Copy and paste the path below and click GO:

  ~/Library/containers/com. Apple.mail

  Move the entire folder com.apple.mail to the Recycle Bin, open Mail and test. If all goes well, you can empty the trash. You may need to re create your user settings.

• Folio 1020 G1 keyboard works not for 30 seconds after the computer wakes from sleep

  I have several books of Folio 1020 G1 where the integrated keyboard does not work for about 30-60 seconds after the resumption of the operation of the standby mode. Everyone met this problem or a solution?

  The touch pad, touch screen and a usb keyboard immediately all work.

  They work on the load of the plant, but these machines were photographed with Windows Enterprise 8.1 x 64 using Configuration Manager 2012. The pack of drivers for this model of http://ftp.hp.com/pub/caps-softpaq/cmit/HP_Driverpack_Matrix_x64.html, http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70362.exe is applied successfully during the imaging task sequence. I also miss the key features of the FN for brightness and microphone mute, but sp70321.exe (http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7343091 & swItemId = ob_144333_1 & swEnvOid = 415... does not solve this problem.

  This question has been somehow created by installing a software Synaptics 17.x version followed by the installtion of the 18.x software required above it. I don't know if this software was automatically installed from Windows builtin drivers or other drivers imported into Configuration Manager have been incorrectly applied, but running "rundll32.exe"% ProgramFiles%\Synaptics\SynTP\SynISDLL.dll",SilentUninstall_CallerWillReboot" in the sequence of tasks before apply the package stops sp71067.exe the problem didn't happen. "

• CQ5320F, 40 seconds after the start, circle beep 3 seconds pause, 5 seconds, does not monitor

  Mine is Compaq Presario CQ5320F desktop PC, Windows 7 64-bit, monitor showed no, 40 seconds after the computer starts, it starts making beep for 3 seconds, then pause 5 seconds, 3 seconds, then pause 5 seconds...

  Thank you.

  I unplug the Mobo RAM and reinsert the memory into the slot and turn on the computer, it has a different tone, so I decide to replace the motherboard first. I am now waiting for my order of Mobo will then publish.

  I replaced the motherboard, and there work now.

  banhien wrote:

  Hello

  Please visit the following link to determine the error and after return. In my view, must be something to do with the RAM, can you reinstall them (it) and try again?

  http://www.computerhope.com/beep.htm

  Kind regards

  BH

• Problem WIFI (no internet access)

  Hello, guys. I week ago I had a Pavilion dv4 (dv4t - 4100) with Intel 802.11b/g/n WLAN. He connected nicely to my router when tonight, he began to show "no internet access", even if the computer recognizes the router and says the signal is at 99%. I guess that a link in the process of WiFi connection was broken at a given moment. It happened between creating a new user account and maybe installing Safari browser. I'm not sure. Or it could be hardware, but nothing shows up in the analysis of troubleshooting or in Device Manager.

  To the HP Support Assistant, shows as follows:

  Microsoft Virtual WiFi Miniport Adapter connected #2-non
  Microsoft Virtual WiFi Miniport adapt - not connected
  Intel(r) WiFi Link 1000 BGN - wireless network connection
  Atheros AR851 PCI-e Gigabit Ethernet (NDIS 6.20) controller - not connected

  The HP network audit, indicates the network in my local router information, internet IP address: not available.

  I'm really confused, because I can not deal with same software that manages my WiFi connections. I found "Intel My WiFi Technology", also "HP Connection Manager" and especially WiFi connections to the taskbar. Then, we should I use and set?

  My questions are:

  (A) if I was using internet without opening 'Intel My WiFi Technology' and 'HP Connection Manager. Do I really need these software? Why are they in my book and why should I activate them?

  (B) if it is important to use one of these programs mentioned above, or both, why and how should I use if I connect to the internet without problem before? And it will restore my internet connection?

  (C) what WLAN module I have? It is said in my order Intel 802.11b/g/n WLAN. It is said in the HP Support Assistant Intel(r) WiFi Link 1000 BGN. Are they the same?

  (D) after identification of my WLAN module, where can I find a driver for it? Because one of them must not be found anywhere. I am in my second built-by-me-bench and I never had trouble to find a drive. For some reason these names I have mentioned do not exist in the list of drivers to Intel. I tried the HP site, but it's too complicated and it seems do not have this key WLAN.

  (E) at the end, how is the best way to connect to the internet and how do I configure my phone for a first and fast connection? Or I have to do anything and I just need to fix something to go back to where it was before, when I was using internet without problem and in a simple way?

  Summarize: I'd love to see a feature more late who says: "connecting dock", where all possible means of connection, WiFi and cable, can be defined in a single window, with simple and clear tutorials.

  Moreover, I like the laptop. Well done, cute, smooth and not full of blotware. I also loved access to all material, simple as a click of the fingers. This will be very handy when I replace the HD for one SSD and mix in a Blu - Ray player. But is a pain.

  Well, I really, really appreciate all responses.

  See you soon,.

  It's the software antivirus (Avast). For some reason when I created the new account, the Avast did not load the new settings and blocked the internet (don't ask me how).

  I uninstalled and tried to establish a connection and I got the same 'no internet connection' icon, but when I tried to open Safari the network is is behaved as if was the first time that I accessed internet. A WiFi window pops up, which I closed, and the internet connection has been restored. Now I'm going to reinstall Avast from scratch.

  Detective Conan.

• Satellite NB10t-Arelatifs victory 8.1 - limited wifi, no internet access connection

  Hello

  so I have Windows of Satellite NB10t-a 8.1 with qualcomm atheros adapter ar956x and im getting connection is limited message, unidentified network, no internet access despite the full bars messsage.

  I have other laptops and computers that run windows 7 etc in the House connection very well.

  I tried pretty much everything that any help at all would be really appreciated.

  > I tried just about everything at all any help would be really appreciated
  and what have you tried exactly?

  Have you tried to update the driver Wlan?
  Have you tested the WLan in relation to other Wlan routers?
  Have you tested different channels WLan (1-11) and different standard WLan (802.11 A/B/G/N)
  Did you test the connection to the WiFi which is not encrypted?

• No Internet access after the connection of the cisco vpn client

  Hi Experts,

  Please check below config.the problem is vpn is connected but no internet access

  on the computer after the vpn connection

  ASA Version 8.0 (2)
  !
  ciscoasa hostname
  activate 8Ry2YjIyt7RRXU24 encrypted password
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  IP 192.168.10.10 255.255.255.0
  !
  interface Ethernet0/1
  nameif inside
  security-level 100
  IP 192.168.14.12 255.255.255.0
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  2KFQnbNIdI.2KYOU encrypted passwd
  passive FTP mode
  standard access list dubai_splitTunnelAcl allow 192.168.14.0 255.255.255.0
  INSIDE_nat0_outbound list of allowed ip extended access all 192.168.14.240 255.255.2
  55.240
  pager lines 24
  Within 1500 MTU
  Outside 1500 MTU
  IP local pool testpool 192.168.14.240 - 192.168.14.250
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access INSIDE_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 192.168.10.12 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout, uauth 0:05:00 absolute
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.14.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac setFirstSet
  Crypto-map dynamic dyn1 1 set transform-set setFirstSet
  Crypto-map dynamic dyn1 1jeu reverse-road
  dynamic mymap 1 dyn1 ipsec-isakmp crypto map
  mymap outside crypto map interface
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  crypto ISAKMP policy 65535
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  a basic threat threat detection
  Statistics-list of access threat detection
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  !
  global service-policy global_policy
  password encrypted user testuser IqY6lTColo8VIF24 name
  username password khans X5bLOVudYKsK1JS / encrypted privilege 15
  tunnel-group mphone type remote access
  tunnel-group mphone General attributes
  address testpool pool
  tunnel-group ipsec-attributes mphone
  pre-shared-key *.
  context of prompt hostname
  Cryptochecksum:059363cdf78583da4e3324e8dfcefbf0
  : end
  ciscoasa #.

  Hello

  Large.  Try adding the below to make it work

  vpn-sheep access list extended permits all ip 192.168.15.0 255.255.255.0

  NAT (inside) 0-list of access vpn-sheep

  Harish

• Satellite C660 - no internet access via WLAN when powered by the battery.

  Hi guys,.

  Just bought a Toshiba Satellite C660 and went through the installation process and everything seemed simple and easy. However, this changed when I tried to use the laptop wireless. As long as I fed it with the AC adapter, all right. When I remove the adapter I lose the internet connection for about 3-5 minutes before it reconnects for about 1 min. Then, he constantly repeats the cycle.

  I have a strong signal that shows as "Connected" to my wireless network in the network and sharing Center, but get the message "no internet access. I have another laptop and PS3 connected to my network wireless without any problem. I disabled them both where they do not interfere with the signal, but that made no difference. Therefore, I am sure that's not the router, the modem, or the wireless signal.

  I checked to see if my WLAN adapter needs an update to the driver, but it shows that I have already installed the latest drivers. I tried to change the power settings for the adapter wireless of "Maximum Performance" all this without success.

  In addition, it works fine on battery if plugged directly on the wireless router.

  Can anyone offer advice on how to fix it, before I return it to the store?

  Thank you

  Jason

  Please take a look in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59879

  There is a similar discussion on this theme.
  So to change the power management settings and the installation of the new driver Wlan has solved this problem.

• Removed vista from my computer and downloaded windows xp but now I have no internet access! I downloaded realtek but the computer has not done something with it!

  Downloaded realtk 8139/810 x using a flash drive, but although we see the file and clicked set up it does not work.  How can I get internet access again?  I seem to not have an ethernet.

  Hi Lorraine,.

  1. where did you downloaded the drivers from?

  2. what exactly happens when you try to run the set-up file? You receive messages or error codes?

  You can try to re - download the latest version of the network drivers on the manufacturer's Web site and check.

  Support for Realtek

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Realtek FAQ

  You can also try to update the latest version of the chipset drivers and check.

  Contact your motherboard manufacturer or the manufacturer of the chipset to get good support driver.

  How to manage devices in Windows XP

• C855 satellite - internet access Wireless does not work after upgrade to Win8

  Hello can someone help me?

  I have Toshiba Satellite C855 1HU. I just upgrade to Windows 8 and now I have no internet Wi - Fi.
  I don't see the wireless icon.
  I have downloaded the widipl - 20121025100952.zip it din't work.

  Means Enyone help me?

  Hello

  You laptop was equipped with card Realtek Wlan RTL8723AE
  I assume that you have installed the wrong driver Wlan.

  Check and try to install the Realtek Wlan driver released for the Win 7 system

• 700 - 430qe envy: Wifi guard fall immediately after the connection manually

  Wireless of my new office as envy worked well for about six weeks and suddenly can't stay connected. I have at least 7 other devices using the same router wireless without any problem.  The connection drops at seconds.  Sometimes I can get a Web page to load but not a second.   I changed the channel on the Router 1, 6 and 11, but that did not help.  I also deselected the option to disable the network card in the computer to save energy, but even once, it did not help.  I can't find advice on the internet that seems to help.

  Network adapter: Broadcom BCM43142

  Windows 8.1

  Hello @sharps34,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how the wireless connection between your computer and network guard falling intermittently, and I'd be happy to help you in this case!

  To re - establish a coherent link between your computer and the network, I recommend later in this document on troubleshooting wireless network and Internet (Windows 8). This should help to run a diagnostic on your system using the network and Internet troubleshooting, as well as measures to maintain your system over the wireless network.

  In addition, I suggest also follows the steps below to ensure that your power management settings do not interfere with

  the connection to the network:

  1. open DEVICE MANAGER
  2. open the NETWORK CARDS
  3. right click on the WiFi adapter for the pc and left click on PROPERTIES
  4. click on POWER up.
  5. remove the check mark beside : ALLOW the COMPUTER TO TURN THIS DEVICE SAVE START STOP
  6. click on OK
  7. close DEVICE MANAGER and test.

• Adobe Reader 11.0.09 stop responding for 30 seconds after the start

  When starting 11 AR (whether via its icon or a .pdf document), AR starts normally, but after a few seconds the interface freezes and unresponsive for about 30 seconds. Connection at startup with Process Monitor gives the result below (actually two instances, only is indicated). When the second instance times out (I guess this is what happens), AR11 starts responding again.

  

  The problem disappears if the Weblink.api plugin is deleted, with the side unhappy effect as the tool on the right pane also disapperas (replaced by a spinning icon but AR11 otherwise responsive).

  AR11 installed on the server doesn't have any Internet access either. My guess is that AR11 is looking for the host above for some reason any and need some time before it becomes available for use. This is obviously a very poor design and we want to solve somehow... Ideas anyone?

  / Patrik

  Workaround. By activating the locking function, we prevented Adobe for trying to muck about online. In fact NSA provides recommendations on how to lock Adobe Reader, google 'Recommendations NSA to configure Adobe Reader XI in a Windows environment'. We only use:

  HKLM\Software\Policies\Adobe\-\FeatureLockDown\cCloud

  bDisableADCFileStore REG_DWORD set to 1