WiFi does not connect if the SSID is not broadcast.

Similar Questions

• After you have uninstalled McAfee, my Wifi does not work (only works LAN connection)

  After you have uninstalled McAfee, my Wifi does not work (only works LAN connection). Troubleshooting message is "windows could automatically bind the ip Protocol to the ip stack.

  New Aspire E11, Windows 8.1

  Help, please.

  Here is how I fixed it:

  Go to control panel > network and Internet > network sharing Center

  Click on "Change adapter settings" in the left pane.

  Right click on your map. Select "Properties".

  There will be a box titled "this connection uses the following items."

  Uncheck anything that looks like it was installed by a third party (AVG, Avast, ZoneAlarm). In my case, the culprit was 'HTC NDIS Protocol Driver", who was installed by the software of my phone (HTC). Because it's not obvious what to uncheck, here is what I currently have checked in my system of work which should not cause a problem:

  KEEP THESE CHECKED:

  Client for Microsoft networks
  QoS Packet Scheduler
  File and Printer Sharing
  IP v6
  Internet Protocol v4
  Driver Link-Layer Topology Discovery map IO
  Link-Layer Topology Discovery recall

  Uncheck everything else.

  Go to network and sharing, disable and re-enable the adapter.

• WiFi does not work on the battery!

  Hello

  I am running Windows 8.0 (64 bit) and my wifi does not work properly in battery mode. AC adapter, it works 100% perfect but in battery operation, it always goes to limited connectivity. He repaired, but 25seconds later, he gets the same problem. Limited each time connectivity. It's a never ending cycle warranty has expired and I am not happy with it.

  Even if repaired, impossible to open any website. Full 5 bars wifi but still the same result. Tried manually (TCP/IP IPv4 settings) but did not work at all.

  My wifi driver is Intel Centrino Wireless N 2230 (15.12.0.6 updated version of the intel.com site).

  C2Y46AV product number (HP ENVY DV6 NOTEBOOK PC)

  Serial number [thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information].

  Tried everything that I could possibly think off such as disabling firewall windows Norton Firewall & Running but still the same problem.

  Can you please tell me what to do?

  HP update.

  Can you please provide a solution for this.

  Thank you

  Navaid involves.

  Hello Ophelia-involves.

  Thanks for posting on the HP Forums!

  I understand that the computer has problems connecting to the networks without wire on the battery life. I'll do my best to help you! After some research, I actually found a Microsoft document that contains the steps I would have provided for your problem: you may experience problems with connectivity or performance issues when you connect a portable computer that runs Windows to a wireless access point

  Please try these steps and let me know what happens. Thank you!

  Mario

• BlackBerry smartphone WiFi does not work most of the time

  It's like a broken record, I know, but my WiFi does not (most of the time).  It used to work well, but over time he works less and less! I use v5.0.0.979 (bundle 1607, the 5.1.0.177 platform and a Bold 9700)  I get the Green checkmarks for connections and WiFi and a white WiFi icon options.  If I try to use the browser of BalckBerry he started working in WiFi and I can see the blue WiFi on my router shows the data flow and then everything stops in for WiFi is concerned and after a period of time, it either expires or most likely to connect to the 3G network.  I used to (a 3 or 4 months) work just fine, but now very poor.  I tried another router and has the same problem.  I found no solution in the forum that makes my 9700 working properly.  If I connect to the weather apps Bug or Thomson Reuters. WiFi works great, load fast and I can see the data on my router blink indicating data streams, but whenever I use the BlackBerry browser, it won't work!  Crazy!

  I found the same thing as automatic power switch at night is interfering with connections no matter what I did. So I stopped using it and it works fine now manually turn it off. Not much extra actually works!

• WIFI does not work on the Satellite L650/078

  Hello
  Hoping someone can help, on my Satellite L650 WIFI does not work.
  No Wifi or Bluetooth functionality. The light is not on and the function key is not brining to the top of all the options.

  Any ideas on how to solve this problem?

  Hello Covie

  Do you use the laptop with the factory settings?
  When you use the FN button you find cards flash at the top of the screen?

  Try please restart flash cards. Start > all programs > Toshiba > utilities.

  Please post comments.

• just has got rid of the virus and responsible for all the disks but given the wifi does not work

  WiFi doesn't work do not

  just has got rid of the virus and responsible for all the disks but given the wifi does not work

  Hello

  Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
  for problems known.

  Actually, try updating your driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Re: Portege M800-10Z - WiFi does not work

  Hello.
  I have a problem. I recently bought Toshiba Portege M800-10Z and downgraded Windovs Vista to XP service pack 3. All right, but the WiFi does not work.

  I tried to upgrade the wireless Lan driver, but it still does not work...
  I have Intel Wireles WiFi Link 5100 and system is Windovs XP service pack 3
  Is there someone who could help me with this issue?

  I would be very grateful for advice.

  Thank you very much

  Hello!

  That you say with the WiFi does not work?
  Can you connect to the router?
  The WLAN card is recognized in Device Manager?

  To solve this problem make sure that you have the latest version of the BIOS. Check on the Toshiba site.

  Also disable features of security as a hidden SSID, MAC address filtering and so far away.
  Check if an update of the firmware on your router available.

  Good bye

• HP 15 laptop: wifi does not work windows 8.1

  I have Windows installed pro 8.1. I was using wifi on this laptop, it worked fine. However, recently, I see that the Wifi does not work although he shows me the SSID of my network I used to use and also the SSID of the networks of neighbors. (It means that the wifi on laptop chip is capable of scanning the wifi signals and so it works). The same router from which all other Mobile tablets, my home laptop work are able to connect to the wifi network. Only on this laptop I am facing this problem. What may be a solution or what I should try. I tried the steps listed here http://www.fixedbyvonnie.com/2013/10/how-to-fix-limited-or-no-connectivity-wi-fi-issues-in-windows-8...

  Although I have not changed the default settings only steps above on blog, I tried to solve the problem. However, it did not work. Also keys function + F12 on laptop has no effect. The light on the F12 key is always on. However, it is possible to toggle the wifi in the bar of Windows 8.1 charms.

  What should I check?

  I bought an external USB wifi device that solved the problem.  The card wifi on laptop works well, but for some unknown reason, he is not able to connect to home wifi router. http://www.snapdeal.com/product/leoxsys-150-Mbps-Nano-WiFi/1179610?utm_source=earth_feed&utm_campaign=TopPerformersPLAScaling3000&utm_medium=CPC&utm_content=1179610&utm_term=, & campaignid = 350311165 & 28373951005 = adgroupid & adposition = 1o1 & network = g & device = c & targetid = pla-55251503741

• Capsule WiFi does not

  A year and half ago we bought a new Mac and the Time Capsule (TC) to go with it. I tried to set up at the start and think about this topic, I do not think that it has never worked properly. I say this because we got a new modem without router because time Capsule has an inside, and we are unable to connect to wifi. I have a TB Ethernet connection and if I can get online in this way, but the WiFi does not work. Last night, I went through and set up and the WiFi worked, but today it no longer works and I can't seem to do it again.

  The indication of WiFi signal says I'm connected, on my Mac and on our phones, but when you disconnect from data it no longer works. It's very frustrating because I don't want to have to go back to a modem/router of the rental of our cable company.

  We have just upgraded to OS X El Capitan 10.11.6

  I'm pretty confident that the problem is with time capsule, the wifi works with the other router.

  When it worked last night I created everything from scratch. But I do not think that I would have to do every time I need to use the internet. I also tried to create a WiFi with a custom DNS but that doesn't work anymore.

  Any help would be appreciated.

  Thank you.

  Amazing!

  I am so embarrassed but understand that I would update in the case where everyone does the same thing.

  When I put in 1.5 years ago I went from ethernet cables. The Ethernet cable from the modem was connected to the LAN port and the Ethernet cable from the Mac was connected to the WAN. Once I put the cable from the modem to the WAN everything has worked.

  Sometimes, just come back to square one.

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• WIFI does not work on my Satellite L650D

  Hi all...

  On my laptop, the wireless light is orange and won t work...
  When I got the laptop connected to the Ethernet cable, it works fine but the minute that I remove it, it turns off.
  Anyone know my problem?

  Thank you

  Hello

  I guess that LAN connection works properly and you can access the internet using LAN.
  But the WiFi does not work even if the WLan light is on. Is this good?

  I m wondering if you have activated the WLan with the FN + F8 keys.
  Have you tried that?

  You have configured the WiFi network properly? I mean that you must make sure that you have chosen the good encryption (WEP, WPA, WPA2, etc.) and the right encryption password!

  You can also disable all the security settings on your router and was able to connect the notebook to open WLan but it must be done only for testing purposes.

• WiFI does not work on Satellite M105-S1021

  My TECRA stopped with the BSoD (on another thread) and I had to leave my old Satellite M105 - S1021 and try and get it going again.

  WiFi does not work on this laptop, even with the switch at the front, running and when I put in a USB WiFI module with an external antenna I get a very bad signal from my router wireless in the next room< 20="" feet="">

  Hello

  I found the specification for this old Satellite M105 series data sheet:
  [Satellite M105-S1021 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1372978& rpn = PSMA2U & modelFilter = M105-S1021 & SelCategorie = 2756709 & selFamily = 1073768663]

  Looks like the laptop was equipped with a map of Atheros 802.11 wireless network b/g.
  If your internal wireless network card does not, even if you have enabled the external WLan switch, then I recommend check device manager first check that the area of Wlan Card network adapters usually map Atheros Wlan must be there if its not listed, install the Atheros Wlan driver

  In addition, next to the switch hardware Wlan, you need to activate the WLan using Fn + F8

  Regarding the USB dongle and a weak signal of Wlan:
  Well, maybe the USB dongle aerial signal is too low on the other hand you should test connectivity using 802.11 B or 802.11 G standard only

• Satellite P500-1CK - WIFI does not work

  Hello

  I bought a Satellite P500-1CK with Windows 7 64 bit. Cause I don't need, I replaced it with Windows 7 32 bit and now my WIFI does not work.

  I tried many drivers, Toshiba drivers and Realtek drivers, old and new versions. Installed and uninstalled them again and again. But it does not work. In the Device Manager, there is no error and no question mark. The map will be displayed as a RTL 8191SE, it's true. I've identified the vendor & device ID also.
  The other FN keys works like a charm, but FN + F8 does not appear. The wireless switch is active and the led is orange.

  When I type "cmd" then "ipconfig/all" it will be only shown the PCI Atheros Gigabit Adapter with the IP address, but not the adapter WLAN of Realtek.

  Searched Google @ and spend hours and hours, but I am at my wits end... Please help me.

  funthomas22

  Hi funthomas22,

  And this doesn t work exactly?

  You see a WLAN in range?
  Have you looked for WLAN networks?
  Can you connect to WIFI networks?

  A point would be interesting: can you try the same thing with preinstalled Windows 7 64 bits instead of your own 32-bit installation?
  Therefore, use the recovery disk Toshiba to restore the version of the OS preinstalled. You will have a pre-tested Toshiba Windows 7 installation where everything should work properly.

  Check this box!

• I upgraded Qualcom Ateros and now my wifi does not work.

  Original title;

  I upgraded Qualcom Ateros and now my wifi does not work. How is it?

  I've just updated and now my wifi does not work. I trust Microsoft updates... But this time I shouldn't trust...

  Hello

  1. what operating system is installed on the computer?

  2. How is that you have updated drivers for QUALCOMM Ateros?

  3. what exactly happens when the problem occurs? You receive an error message?

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the following link.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Also check out the following link:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• Lenovo W530 WIFI does not work after closing down

  Hi, I have a brand new Lenovo W530. The WIFI does not connect to the web page after shut down, but OK if wake up from hibernation.  I have to go to Device Manager to uninstall the devices then restart and reconnect to the WIFI to make it work.  Please advice how to fix this problem.

  This may be a problem with the driver. Update the driver, or if no update is available, reinstall the driver. Restart the PC and then start using the device.

• Why my wifi doesn't connect after the mode 'sleep'?

  When I close the lid on my laptop and open it again my wifi does not connect unless I reboot. I have recently installed windows 8 and that's when the problem ensued. My laptop is a hp envy 15-3247nr with all windows 8 drivers installed and updated including the BIOS. It's okay I'm trying, my wifi option remains grayed out even to disable airplane mode. The f12 key stays orange and does not come on until I restart my laptop in a couple times. Help, please.

  (all drivers are up-to-date and in working order and Yes, the power of the network adapter settings have been changed to not save energy)

  Yes, I tried the utility intel to uptate pilot and he was one of the network drivers and windows 8 but when I tried to install it, an error message would come to saying that I had so he couldn't install the supported operating system.

  And Yes, I went into the bios and set all my settings to the default values and after that point it began to work.

  what I specifically made back my driver of network to an earlier version, and then I went into my bios and changed my setting of network adapter the opposite of what they were (activated or deactivated the opposite), restarted my computer (does not solve my computer), so then I went back into the bios and reset all settings to the default values, and after this point is at the beginning of my wifi to connect without having to restart my computer and so far so good.